Attenuators and Cab Simulators

{"id":1295358787650,"title":"Bugera PS1 Power Soak Passive 100-watt Power Attenuator","handle":"bugera-ps1-passive-100-watt-power-attenuator","description":"PS1 Passive 100-Watt Power Attenuator for Guitar and Bass Amplifiers with Emulated Mic Output\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePOWER SOAK PS1\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eYou love the sound of your 100-Watt all-tube amp when it’s cranked; that sweet, crunchy sound supporting you as you soar into the tonal stratosphere! But now, back down to Earth... Wouldn’t it be great if you could get that same amazing tone at a reasonable volume level –or at any volume level? The PS1 POWER SOAK is the answer for tone-craving guitarists everywhere, letting you drive the output tubes of your amp hard enough to squeeze out every drop of tone at any volume. The PS1 works with virtually any tube amp up to 100 Watts (4, 8 or 16 Ohms) and your favorite speaker cabinet, plus provides a Line output with dedicated level control and an Emulated Mic output to send your signal to the mixing console.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMulti-Impedance Operation\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe PS1 POWER SOAK is designed to be inserted between your tube amp and your speaker cabinet. Just run a speaker cable from the output of your amp to the corresponding PS1 Amp Input jack that matches your amplifier’s operating impedance (4, 8 or 16 Ohms), and run a second speaker cable from PS1’s Speaker Output to your cabinet. Power up your amp and dial in your favorite sound, then adjust the large Soak knob to the ideal volume level. All the tone, without all the volume – it’s just that easy!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDedicated Line Output\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOn PS1’s rear panel you’ll find a convenient Line output jack for connecting to an external power amplifier for running additional speaker cabinets, or to effects processing gear in professional applications such as the recording studio. The signal from the Line output does not have speaker\/ mic emulation, but does feature its own dedicated Level control.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBuilt-In Direct Box\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eNow that you have your stage volume under control, you can stick a mic in front of your speaker or better yet, use PS1’s built-in Emulated Mic Output to get all that great tone to the front of house (FOH) or recording console. This balanced XLR output mimics the sound captured by placing a microphone in front of your speaker without the need for any additional gear.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReal Tone – Real Value\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe PS1 POWER SOAK respects your tone, delivering it to your ears at any volume level you choose, and it delivers that same great tone to the mixer – whether you’re on the stage or in the studio. Easy to use and extremely affordable, the PS1 will make the club owner, sound man, and even your bandmates love your playing all the more. Visit your BUGERA dealer to try one out, or get your PS1 POWER SOAK online today! You’ve never sounded better.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Passive 100-Watt Power Attenuator allows you to get the ultimate overdriven tone at any volume\u003cbr\u003e• Multi-impedance input connectors (4, 8 and 16 Ohms) to match virtually any amplifier\u003cbr\u003e• Line output with dedicated Level control\u003cbr\u003e• Emulated Mic Output mimics a microphone in front of a speaker cabinet\u003cbr\u003e• 3-Year Warranty Program\u003cbr\u003e• Designed and engineered in Germany","published_at":"2018-05-09T11:07:21-04:00","created_at":"2018-05-09T11:07:21-04:00","vendor":"Bugera","type":"Amplifiers","tags":["Brand_Bugera","reverbsync-offers:off","reverbsync-shipping-profile:free","Type_Power Attenuators"],"price":9999,"price_min":9999,"price_max":9999,"available":false,"price_varies":false,"compare_at_price":14999,"compare_at_price_min":14999,"compare_at_price_max":14999,"compare_at_price_varies":false,"variants":[{"id":12094931238978,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"748252174840","requires_shipping":true,"taxable":true,"featured_image":{"id":3529402843202,"product_id":1295358787650,"position":1,"created_at":"2018-05-09T11:07:21-04:00","updated_at":"2018-05-09T11:07:21-04:00","alt":"Bugera PS1 Power Attenuator","width":1200,"height":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Bugera_PS1_Attenuator_01.jpg?v=1525878441","variant_ids":[12094931238978]},"available":false,"name":"Bugera PS1 Power Soak Passive 100-watt Power Attenuator","public_title":null,"options":["Default Title"],"price":9999,"weight":0,"compare_at_price":14999,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"748252174840"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Bugera_PS1_Attenuator_01.jpg?v=1525878441","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Bugera_PS1_Attenuator_02.jpg?v=1558888853","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Bugera_PS1_Attenuator_03.jpg?v=1558888853","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Bugera_PS1_Attenuator_04.jpg?v=1558888853"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Bugera_PS1_Attenuator_01.jpg?v=1525878441","options":["Title"],"content":"PS1 Passive 100-Watt Power Attenuator for Guitar and Bass Amplifiers with Emulated Mic Output\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePOWER SOAK PS1\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eYou love the sound of your 100-Watt all-tube amp when it’s cranked; that sweet, crunchy sound supporting you as you soar into the tonal stratosphere! But now, back down to Earth... Wouldn’t it be great if you could get that same amazing tone at a reasonable volume level –or at any volume level? The PS1 POWER SOAK is the answer for tone-craving guitarists everywhere, letting you drive the output tubes of your amp hard enough to squeeze out every drop of tone at any volume. The PS1 works with virtually any tube amp up to 100 Watts (4, 8 or 16 Ohms) and your favorite speaker cabinet, plus provides a Line output with dedicated level control and an Emulated Mic output to send your signal to the mixing console.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMulti-Impedance Operation\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe PS1 POWER SOAK is designed to be inserted between your tube amp and your speaker cabinet. Just run a speaker cable from the output of your amp to the corresponding PS1 Amp Input jack that matches your amplifier’s operating impedance (4, 8 or 16 Ohms), and run a second speaker cable from PS1’s Speaker Output to your cabinet. Power up your amp and dial in your favorite sound, then adjust the large Soak knob to the ideal volume level. All the tone, without all the volume – it’s just that easy!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDedicated Line Output\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOn PS1’s rear panel you’ll find a convenient Line output jack for connecting to an external power amplifier for running additional speaker cabinets, or to effects processing gear in professional applications such as the recording studio. The signal from the Line output does not have speaker\/ mic emulation, but does feature its own dedicated Level control.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBuilt-In Direct Box\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eNow that you have your stage volume under control, you can stick a mic in front of your speaker or better yet, use PS1’s built-in Emulated Mic Output to get all that great tone to the front of house (FOH) or recording console. This balanced XLR output mimics the sound captured by placing a microphone in front of your speaker without the need for any additional gear.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eReal Tone – Real Value\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe PS1 POWER SOAK respects your tone, delivering it to your ears at any volume level you choose, and it delivers that same great tone to the mixer – whether you’re on the stage or in the studio. Easy to use and extremely affordable, the PS1 will make the club owner, sound man, and even your bandmates love your playing all the more. Visit your BUGERA dealer to try one out, or get your PS1 POWER SOAK online today! You’ve never sounded better.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Passive 100-Watt Power Attenuator allows you to get the ultimate overdriven tone at any volume\u003cbr\u003e• Multi-impedance input connectors (4, 8 and 16 Ohms) to match virtually any amplifier\u003cbr\u003e• Line output with dedicated Level control\u003cbr\u003e• Emulated Mic Output mimics a microphone in front of a speaker cabinet\u003cbr\u003e• 3-Year Warranty Program\u003cbr\u003e• Designed and engineered in Germany"}

{"id":3421346136130,"title":"JHS Little Black Amp Box Passive Amp Attenuator","handle":"jhs-little-black-amp-box-passive-amp-attenuator","description":"Little Black Amp Box - Passive Amp Attenuator\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTames Your High-powered Amp to Bedroom Volumes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eHave you ever turned your favorite amplifier down to practice volumes, just to be underwhelmed by the sound? Assuming your amp has an effects loop, the JHS Little Black Amp Box ensures that those days are gone. Simply run this magic device in your effects loop, and you're able to crank your amp's preamp volume, while taming the overall output with the Little Black Amp Box's single control. It's that easy. Now you can enjoy the full-throated tones of your amp's front end, without the deafening volumes. Check out the JHS Little Black Amp Box. You'll be glad you did.\u003cbr\u003e\u003cbr\u003eThis device is only intended for amplifiers with an effects loop. Do not place it after the speaker output of any amp.\u003cbr\u003e\u003cbr\u003eThis pedal does not require power and it measures 3.6\"x1.5\"x1\"","published_at":"2019-09-14T15:10:56-04:00","created_at":"2019-09-14T15:10:56-04:00","vendor":"JHS Pedals","type":"Amplifiers","tags":["15_percent","Brand_JHS Pedals","New","reverbsync-offers:off","reverbsync-shipping-profile:free 2 day","Type_Passive Attenuators"],"price":4500,"price_min":4500,"price_max":4500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":28493265436738,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"650415211265","requires_shipping":true,"taxable":true,"featured_image":{"id":11879747584066,"product_id":3421346136130,"position":1,"created_at":"2019-09-14T15:10:56-04:00","updated_at":"2019-09-14T15:10:56-04:00","alt":"JHS Little Black Amp Box","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/JHS_LittleBlackAmpBox_01.jpg?v=1568488256","variant_ids":[28493265436738]},"available":true,"name":"JHS Little Black Amp Box Passive Amp Attenuator","public_title":null,"options":["Default Title"],"price":4500,"weight":0,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"650415211265"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/JHS_LittleBlackAmpBox_01.jpg?v=1568488256","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/JHS_LittleBlackAmpBox_02.jpg?v=1568491186"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/JHS_LittleBlackAmpBox_01.jpg?v=1568488256","options":["Title"],"content":"Little Black Amp Box - Passive Amp Attenuator\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTames Your High-powered Amp to Bedroom Volumes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eHave you ever turned your favorite amplifier down to practice volumes, just to be underwhelmed by the sound? Assuming your amp has an effects loop, the JHS Little Black Amp Box ensures that those days are gone. Simply run this magic device in your effects loop, and you're able to crank your amp's preamp volume, while taming the overall output with the Little Black Amp Box's single control. It's that easy. Now you can enjoy the full-throated tones of your amp's front end, without the deafening volumes. Check out the JHS Little Black Amp Box. You'll be glad you did.\u003cbr\u003e\u003cbr\u003eThis device is only intended for amplifiers with an effects loop. Do not place it after the speaker output of any amp.\u003cbr\u003e\u003cbr\u003eThis pedal does not require power and it measures 3.6\"x1.5\"x1\""}

{"id":1944648319042,"title":"Boss WAZA Tube Amp Expander","handle":"boss-waza-tube-amp-expander","description":"WAZA Tube Amp Expander - Reactive Load Device\u003cbr\u003e\u003cbr\u003eMODERNIZE THE TUBE AMP EXPERIENCE\u003cbr\u003e\u003cbr\u003eBringing together a diverse range of professional tone tools for the very first time, the Waza Tube Amp Expander elevates the tube amp experience to a new level of versatility for stage performing and studio recording. This amazing device does it all—it’s a variable reactive load box, active analog power stage, mic’d cab emulator, IR loader, and recording interface, all in one integrated unit that’s road-ready and easy to use.\u003cbr\u003e\u003cbr\u003eBacked by our advanced Tube Logic approach, you’re able to crank your amp to its sweet spot and play at any volume while faithfully retaining the core tone and feel you love. And with extensive connectivity, built-in BOSS effects, 10 fully customizable rig setups, and deep real-time control, you have unparalleled creative command for any scenario. Packed to the max with breakthrough BOSS innovations, the Waza Tube Amp Expander is an essential companion for every tube amp player.\u003cbr\u003e\u003cbr\u003eCranked-Amp Tone and Feel at Any Volume\u003cbr\u003e\u003cbr\u003eAs a tube amp owner, you know that it sounds and feels best when it’s cranked up loud and really cooking. But if you’re like most of us, it’s a rare pleasure to be able to open up the volume enough to unlock that full expressive potential. Load boxes and volume attenuators driven by a tube amp’s speaker output have attempted to solve this nagging volume issue for years. But while they do lower the volume and provide workable results, they typically introduce artifacts that change the tone, dynamic response, and distortion character, leaving you with an unsatisfying experience.\u003cbr\u003e\u003cbr\u003eThe Waza Tube Amp Expander’s advanced reactive load section completely eliminates these artifacts, allowing you to experience your amp’s true cranked-up sound and interactive feel while controlling the volume to suit any situation. A key feature is the Resonance-Z and Presence-Z panel controls, which optimize the all-important impedance interaction with your amp’s output transformer. Selecting from sixteen different settings, you can make your amp behave and respond exactly as if it were connected to your favorite speaker cab. Any tube guitar amp up to 150 watts is supported, from vintage combos to modern high-gain heads.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• First-of-its-kind tube amp command center, built with Waza expertise and the Tube Logic design approach\u003cbr\u003e• Advanced variable reactive load circuit with discrete analog components supports tube amps up to 150 watts\u003cbr\u003e• User-adjustable impedance tuning correctly matches the reactive load to your amp, retaining its natural tone, dynamic feel, and distortion characteristics\u003cbr\u003e• 10 recallable rig settings for storing favorite setups\u003cbr\u003e• Deep real-time performance control via GA-FC\/FS-series footswitches and MIDI I\/O\u003cbr\u003e• Built-in 100-watt Class AB power amplifier with discrete analog design and seamless volume control\u003cbr\u003e• Powerful DSP section with 32-bit AD\/DA, 32-bit floating-point processing, and 96 kHz sampling rate\u003cbr\u003e• Customizable stereo effects with premium tone quality: compressor, delay, reverb, and four EQs\u003cbr\u003e• Twenty-two mic’d cabinet emulations with five selectable close-mic types and three room-mic options, plus four slots for loading user speaker IRs\u003cbr\u003e• External effects loop with selectable series\/parallel operation and control jack for switching amp channels\u003cbr\u003e• Parallel speaker outputs for connecting up to two cabs for gigging\u003cbr\u003e• Balanced XLR line outputs (mono and L\/R stereo) for connecting to FOH console, stage monitors, and recording devices\u003cbr\u003e• Headphones output for quiet practice with cranked-up amp tones\u003cbr\u003e• Dedicated editor software (Mac\/Windows)\u003cbr\u003e• USB for direct audio recording and editor communication\u003cbr\u003e• Brackets included for rack mounting (4U required: 2U for product and 1U above\/below for ventilation)\u003cbr\u003e• Dimension (W x D x H): 15\" x 11-11\/16\" x 4-3\/8\"\u003cbr\u003e• Weight: 15 lbs","published_at":"2019-07-09T13:14:09-04:00","created_at":"2019-07-09T13:14:09-04:00","vendor":"Boss","type":"Amplifiers","tags":["Brand_Boss","New","reverbsync-offers:off","reverbsync-shipping-profile:free","Type_Power Attenuators"],"price":129999,"price_min":129999,"price_max":129999,"available":true,"price_varies":false,"compare_at_price":189999,"compare_at_price_min":189999,"compare_at_price_max":189999,"compare_at_price_varies":false,"variants":[{"id":16035223601218,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"761294513590","requires_shipping":true,"taxable":true,"featured_image":{"id":11415594991682,"product_id":1944648319042,"position":1,"created_at":"2019-07-09T13:14:09-04:00","updated_at":"2019-07-09T13:14:09-04:00","alt":"Boss WAZA Tube Amp Expander","width":1680,"height":1680,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Boss_WAZA-TubeAmpExpander_01.jpg?v=1562692449","variant_ids":[16035223601218]},"available":true,"name":"Boss WAZA Tube Amp Expander","public_title":null,"options":["Default Title"],"price":129999,"weight":0,"compare_at_price":189999,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"761294513590"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Boss_WAZA-TubeAmpExpander_01.jpg?v=1562692449","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Boss_WAZA-TubeAmpExpander_02.jpg?v=1562693668","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Boss_WAZA-TubeAmpExpander_03.jpg?v=1562693673","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Boss_WAZA-TubeAmpExpander_04.jpg?v=1562693675","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Boss_WAZA-TubeAmpExpander_05.jpg?v=1562693677"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Boss_WAZA-TubeAmpExpander_01.jpg?v=1562692449","options":["Title"],"content":"WAZA Tube Amp Expander - Reactive Load Device\u003cbr\u003e\u003cbr\u003eMODERNIZE THE TUBE AMP EXPERIENCE\u003cbr\u003e\u003cbr\u003eBringing together a diverse range of professional tone tools for the very first time, the Waza Tube Amp Expander elevates the tube amp experience to a new level of versatility for stage performing and studio recording. This amazing device does it all—it’s a variable reactive load box, active analog power stage, mic’d cab emulator, IR loader, and recording interface, all in one integrated unit that’s road-ready and easy to use.\u003cbr\u003e\u003cbr\u003eBacked by our advanced Tube Logic approach, you’re able to crank your amp to its sweet spot and play at any volume while faithfully retaining the core tone and feel you love. And with extensive connectivity, built-in BOSS effects, 10 fully customizable rig setups, and deep real-time control, you have unparalleled creative command for any scenario. Packed to the max with breakthrough BOSS innovations, the Waza Tube Amp Expander is an essential companion for every tube amp player.\u003cbr\u003e\u003cbr\u003eCranked-Amp Tone and Feel at Any Volume\u003cbr\u003e\u003cbr\u003eAs a tube amp owner, you know that it sounds and feels best when it’s cranked up loud and really cooking. But if you’re like most of us, it’s a rare pleasure to be able to open up the volume enough to unlock that full expressive potential. Load boxes and volume attenuators driven by a tube amp’s speaker output have attempted to solve this nagging volume issue for years. But while they do lower the volume and provide workable results, they typically introduce artifacts that change the tone, dynamic response, and distortion character, leaving you with an unsatisfying experience.\u003cbr\u003e\u003cbr\u003eThe Waza Tube Amp Expander’s advanced reactive load section completely eliminates these artifacts, allowing you to experience your amp’s true cranked-up sound and interactive feel while controlling the volume to suit any situation. A key feature is the Resonance-Z and Presence-Z panel controls, which optimize the all-important impedance interaction with your amp’s output transformer. Selecting from sixteen different settings, you can make your amp behave and respond exactly as if it were connected to your favorite speaker cab. Any tube guitar amp up to 150 watts is supported, from vintage combos to modern high-gain heads.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• First-of-its-kind tube amp command center, built with Waza expertise and the Tube Logic design approach\u003cbr\u003e• Advanced variable reactive load circuit with discrete analog components supports tube amps up to 150 watts\u003cbr\u003e• User-adjustable impedance tuning correctly matches the reactive load to your amp, retaining its natural tone, dynamic feel, and distortion characteristics\u003cbr\u003e• 10 recallable rig settings for storing favorite setups\u003cbr\u003e• Deep real-time performance control via GA-FC\/FS-series footswitches and MIDI I\/O\u003cbr\u003e• Built-in 100-watt Class AB power amplifier with discrete analog design and seamless volume control\u003cbr\u003e• Powerful DSP section with 32-bit AD\/DA, 32-bit floating-point processing, and 96 kHz sampling rate\u003cbr\u003e• Customizable stereo effects with premium tone quality: compressor, delay, reverb, and four EQs\u003cbr\u003e• Twenty-two mic’d cabinet emulations with five selectable close-mic types and three room-mic options, plus four slots for loading user speaker IRs\u003cbr\u003e• External effects loop with selectable series\/parallel operation and control jack for switching amp channels\u003cbr\u003e• Parallel speaker outputs for connecting up to two cabs for gigging\u003cbr\u003e• Balanced XLR line outputs (mono and L\/R stereo) for connecting to FOH console, stage monitors, and recording devices\u003cbr\u003e• Headphones output for quiet practice with cranked-up amp tones\u003cbr\u003e• Dedicated editor software (Mac\/Windows)\u003cbr\u003e• USB for direct audio recording and editor communication\u003cbr\u003e• Brackets included for rack mounting (4U required: 2U for product and 1U above\/below for ventilation)\u003cbr\u003e• Dimension (W x D x H): 15\" x 11-11\/16\" x 4-3\/8\"\u003cbr\u003e• Weight: 15 lbs"}

{"id":1504019087426,"title":"AmpRX Brownie Tube Amplifier Input Voltage Attenuator","handle":"amprx-brownie-tube-amplifier-input-voltage-attenuator","description":"Brownie Tube Amp Power Correction Unit\u003cbr\u003e\u003cbr\u003eAmpRX's answer for the budget minded player, or just the Small amp owner. The Brownie tube amp power correction unit enjoys a huge fan base. From bedroom players to lifelong touring Pros, the Brownie is for those who only need Basic Voltage control in a super light weight enclosure. The Brownie will provide 2 amperes or 240 watts of continuous power @ 120vac. Designed for smaller Tube amps, Deluxe Reverb, Champs, Princeton and and Pedal-boards. 8 on the fly selectable voltage levels. The Hi\/Lo switch provides and instant 5 volt + or - re-scale from the current selected voltage level, an excellent feature! The Brownie's internal circuit includes: In-rush current protection, industrial grade switches, powder coated EMF neutral Enclosure and a Backlit voltage display. 2.9LBS. Lifetime warranty, 15 day no questions asked return policy. Made in the USA.\u003cbr\u003e","published_at":"2018-08-08T10:41:05-04:00","created_at":"2018-08-08T10:41:05-04:00","vendor":"AmpRX","type":"Amplifiers","tags":["Brand_AmpRX","reverbsync-offers:off","reverbsync-shipping-profile:free","Type_Power Attenuators"],"price":24900,"price_min":24900,"price_max":24900,"available":false,"price_varies":false,"compare_at_price":0,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13020198043714,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"AMPRRXBROWNIE","requires_shipping":true,"taxable":true,"featured_image":{"id":4018662244418,"product_id":1504019087426,"position":1,"created_at":"2018-08-08T10:41:05-04:00","updated_at":"2018-08-08T10:41:05-04:00","alt":"AmpRX Brownie Attenuator","width":1300,"height":1300,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/AmpRX_Brownie_01.jpg?v=1533739265","variant_ids":[13020198043714]},"available":false,"name":"AmpRX Brownie Tube Amplifier Input Voltage Attenuator","public_title":null,"options":["Default Title"],"price":24900,"weight":0,"compare_at_price":0,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"AMPRRXBROWNIE"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/AmpRX_Brownie_01.jpg?v=1533739265","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/AmpRX_Brownie_02.jpg?v=1558888939"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/AmpRX_Brownie_01.jpg?v=1533739265","options":["Title"],"content":"Brownie Tube Amp Power Correction Unit\u003cbr\u003e\u003cbr\u003eAmpRX's answer for the budget minded player, or just the Small amp owner. The Brownie tube amp power correction unit enjoys a huge fan base. From bedroom players to lifelong touring Pros, the Brownie is for those who only need Basic Voltage control in a super light weight enclosure. The Brownie will provide 2 amperes or 240 watts of continuous power @ 120vac. Designed for smaller Tube amps, Deluxe Reverb, Champs, Princeton and and Pedal-boards. 8 on the fly selectable voltage levels. The Hi\/Lo switch provides and instant 5 volt + or - re-scale from the current selected voltage level, an excellent feature! The Brownie's internal circuit includes: In-rush current protection, industrial grade switches, powder coated EMF neutral Enclosure and a Backlit voltage display. 2.9LBS. Lifetime warranty, 15 day no questions asked return policy. Made in the USA.\u003cbr\u003e"}

{"id":1381890621506,"title":"Dr. Z Brake Lite SA Stand Alone Amplifier Attenuator","handle":"dr-z-brake-lite-sa-stand-alone-amplifier-attenuator","description":"You asked for for it and DrZ listened... Introducing the fully enclosed Brake Lite SA (Stand Alone.) Same guts as the combo mount Brake Lite, but able to be tossed in the gig bag for use with many different amps on the fly. The Brake Lite SA works with any tube amp up to 45 watts and can be used with 4, 8, or 16, ohm loads (not recommended for use with 2 Ohm loads). The SA features 2 speaker outs that are wired in parallel. You can now run multiple cabs with ease.\u003cbr\u003e\u003cbr\u003eThe Brake Lite SA measures 6\" x 5\" x 3-1\/4\" and weighs in at 1.5 lbs. Four 1\/2\" feet give plenty of clearance for resting on top of your amp. At the Zero setting the Brake Lite SA is fully bypassed. Each click of the Attenuator knob yields more attenuation: 1=2dB, 2=5dB, 3=8dB, and 4=11dB.\u003cbr\u003e\u003cbr\u003eAlways use a speaker cable to connect the Brake Lite SA to your speaker. When connecting a second cab you will be making a parallel load. Ex: a pair of 8 ohm cabs use the 4 ohm speaker out on your amp.","published_at":"2018-06-04T12:08:30-04:00","created_at":"2018-06-04T12:08:30-04:00","vendor":"Dr. Z","type":"Amplifiers","tags":["Brand_Dr. Z","reverbsync-offers:off","reverbsync-shipping-profile:free","Type_Power Attenuators"],"price":23900,"price_min":23900,"price_max":23900,"available":false,"price_varies":false,"compare_at_price":0,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":12448870367298,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DRZBRAKELITESA","requires_shipping":true,"taxable":true,"featured_image":{"id":3675829993538,"product_id":1381890621506,"position":1,"created_at":"2018-06-04T12:08:30-04:00","updated_at":"2018-06-04T12:08:31-04:00","alt":"Dr. Z Brake Lite SA Attenuator","width":550,"height":550,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/DrZ_BrakeLiteSA_StandAlone_01.jpg?v=1528128511","variant_ids":[12448870367298]},"available":false,"name":"Dr. Z Brake Lite SA Stand Alone Amplifier Attenuator","public_title":null,"options":["Default Title"],"price":23900,"weight":0,"compare_at_price":0,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"DRZBRAKELITESA"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/DrZ_BrakeLiteSA_StandAlone_01.jpg?v=1528128511","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/DrZ_BrakeLiteSA_StandAlone_02.jpg?v=1528216505","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/DrZ_BrakeLiteSA_StandAlone_03.jpg?v=1528216506"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/DrZ_BrakeLiteSA_StandAlone_01.jpg?v=1528128511","options":["Title"],"content":"You asked for for it and DrZ listened... Introducing the fully enclosed Brake Lite SA (Stand Alone.) Same guts as the combo mount Brake Lite, but able to be tossed in the gig bag for use with many different amps on the fly. The Brake Lite SA works with any tube amp up to 45 watts and can be used with 4, 8, or 16, ohm loads (not recommended for use with 2 Ohm loads). The SA features 2 speaker outs that are wired in parallel. You can now run multiple cabs with ease.\u003cbr\u003e\u003cbr\u003eThe Brake Lite SA measures 6\" x 5\" x 3-1\/4\" and weighs in at 1.5 lbs. Four 1\/2\" feet give plenty of clearance for resting on top of your amp. At the Zero setting the Brake Lite SA is fully bypassed. Each click of the Attenuator knob yields more attenuation: 1=2dB, 2=5dB, 3=8dB, and 4=11dB.\u003cbr\u003e\u003cbr\u003eAlways use a speaker cable to connect the Brake Lite SA to your speaker. When connecting a second cab you will be making a parallel load. Ex: a pair of 8 ohm cabs use the 4 ohm speaker out on your amp."}

{"id":1381890162754,"title":"Dr. Z Air Brake Amplifier Attenuator","handle":"dr-z-air-brake-amplifier-attenuator","description":"Z Air Brake Amplifier Attenuator\u003cbr\u003e\u003cbr\u003eThe Z Air Brake has two major applications. One is for stage use, the other is for studio or home use.\u003cbr\u003e\u003cbr\u003eFor stage use, the Z Air Brake is a useful tool to limit your overall dB level at any time during a performance. Example: the beginning of the night (when the club isn’t full) click the Air Brake to a level of attenuation to allow for smooth tone at a lower volume level. As the night progresses, reach back and remove degrees of attenuation until the desired level is reached. This will allow you to manage your amp’s overall volume without varying from your amp’s favorite settings.\u003cbr\u003e\u003cbr\u003eAt home, the Air Brake is useful for lower volume while still allowing for full output tube distortion. The Air Brake has a “bedroom” level control that, when selected, will allow for fine adjustment and maximum attenuation down to 1 watt (with amps less than 100 watts). The Air Brake can be used with 4, 8, and 16 ohm loads.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Dimensions: 9\" W x 3\" H x 6\" D\u003cbr\u003e• Weight: 3 lbs.","published_at":"2018-06-04T12:08:25-04:00","created_at":"2018-06-04T12:08:25-04:00","vendor":"Dr. Z","type":"Amplifiers","tags":["Brand_Dr. Z","reverbsync-offers:off","reverbsync-shipping-profile:free","Type_Power Attenuators"],"price":38900,"price_min":38900,"price_max":38900,"available":false,"price_varies":false,"compare_at_price":0,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":12448869974082,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DRZAIRBRAKE","requires_shipping":true,"taxable":true,"featured_image":{"id":3675829502018,"product_id":1381890162754,"position":1,"created_at":"2018-06-04T12:08:26-04:00","updated_at":"2018-06-04T12:08:26-04:00","alt":"Dr. Z Air Brake Attenuator","width":1030,"height":1030,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/DrZ_Z_Air_Brake_01.jpg?v=1528128506","variant_ids":[12448869974082]},"available":false,"name":"Dr. Z Air Brake Amplifier Attenuator","public_title":null,"options":["Default Title"],"price":38900,"weight":0,"compare_at_price":0,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"DRZAIRBRAKE"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/DrZ_Z_Air_Brake_01.jpg?v=1528128506","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/DrZ_Z_Air_Brake_02.jpg?v=1528216617"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/DrZ_Z_Air_Brake_01.jpg?v=1528128506","options":["Title"],"content":"Z Air Brake Amplifier Attenuator\u003cbr\u003e\u003cbr\u003eThe Z Air Brake has two major applications. One is for stage use, the other is for studio or home use.\u003cbr\u003e\u003cbr\u003eFor stage use, the Z Air Brake is a useful tool to limit your overall dB level at any time during a performance. Example: the beginning of the night (when the club isn’t full) click the Air Brake to a level of attenuation to allow for smooth tone at a lower volume level. As the night progresses, reach back and remove degrees of attenuation until the desired level is reached. This will allow you to manage your amp’s overall volume without varying from your amp’s favorite settings.\u003cbr\u003e\u003cbr\u003eAt home, the Air Brake is useful for lower volume while still allowing for full output tube distortion. The Air Brake has a “bedroom” level control that, when selected, will allow for fine adjustment and maximum attenuation down to 1 watt (with amps less than 100 watts). The Air Brake can be used with 4, 8, and 16 ohm loads.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Dimensions: 9\" W x 3\" H x 6\" D\u003cbr\u003e• Weight: 3 lbs."}

{"id":1504018858050,"title":"AmpRX BrownBox Tube Amplifier Input Voltage Attenuator","handle":"amprx-brownbox-tube-amplifier-input-voltage-attenuator","description":"BrownBox Voltage Optimization Device for Tube Amplifiers\u003cbr\u003e\u003cbr\u003eBrownBox was created to provide a safe range of voltage reduction levels for vintage tube amplifier designs. The same, era-correct voltage levels that the amps were designed around. AmpRX products can also be used with modern solid state amp designs protecting them from potential over voltage conditions. \u003cbr\u003e\u003cbr\u003eThe dynamics of a vintage amp supplied with the proper line voltage are optimized and will sound and respond as originally intended, revealing the circuits true harmonic content. This is the starting point, the basis of the signal chain, and where serious musicians begin creating a signature tone. \u003cbr\u003e\u003cbr\u003eMost vintage tube amps respond more harmonically and touch sensitive with optimized voltage. Placing these circuits back into balance reveals the authentic tone fundamental of the amp, tone that can truly blossom. \u003cbr\u003e\u003cbr\u003eFor the Tube Tone Purist, no pedal or attenuator can come close to replicating the heavenly response of dry, purely saturated tubes. Pedals and attenuators have their place, keeping in mind that they color your tone, not create it.\u003cbr\u003e\u003cbr\u003eEveryone can enjoy multi-dimensional pure tube tone, if they just know where to start. \u003cbr\u003e\u003cbr\u003eBrownBox is not a variac. Unlike a variac, Brownbox cannot accidentally harm or destroy your amplifier. The maximum input voltage available using BrownBox is your regional line wall voltage, in bypass mode. All other selections are reduction levels that you determine sound best for your amp. \u003cbr\u003e\u003cbr\u003eBrownBox employs a proprietary custom-wound toroid transformer, intended for use with one amplifier. Check you amps input wattage rating prior to use. Their proprietary transformers are custom wound exclusively for use with tube amplifier designs, but can be used with Solid state circuits.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Voltage Optimization?\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eVoltage Optimization provides numerous benefits:\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e• Establishes the basis for your signal chain and the starting point in building a consistent signature tone. Earlier power tube saturation equals earlier break-up at more usable volume levels . \u003cbr\u003e• A smoother tonal shift toward even order harmonics, revealing the amplifier's true designed tone fundamental . \u003cbr\u003e• Lower internal voltages = lower dissipation = longer component life.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Easy to read, back-lit L.C.D. display enabling real-time voltage and amperage monitoring, also useful for diagnostics.\u003cbr\u003e• Tough road rugged construction.\u003cbr\u003e• Proprietary Transformer designs wound exclusively for use with tube amplifiers, an industry first!\u003cbr\u003e• Filament soft-start in full reduction mode. \u003cbr\u003e• A powder coated EMF neutral housing. In-rush current protection, fused over-load protection .\u003cbr\u003e• Silent, cool operation.\u003cbr\u003e• Custom wound 5 amp proprietary transformer that will supply 540 watts max @ 120 Vac. Designed for Mid to larger sized Amps, Fender Bassman, Marshall 50s\/100S, etc or for Parallel or (DUAL) amp rigs. Be sure to Check the manufacturer's info plate on the rear of the Chassis for input watt requirements.\u003cbr\u003e• LIFETIME WARRANTY.\u003cbr\u003e• Made in the USA.","published_at":"2018-08-08T10:40:57-04:00","created_at":"2018-08-08T10:40:57-04:00","vendor":"AmpRX","type":"Amplifiers","tags":["Brand_AmpRX","reverbsync-offers:off","reverbsync-shipping-profile:free","Type_Power Attenuators"],"price":34900,"price_min":34900,"price_max":34900,"available":true,"price_varies":false,"compare_at_price":0,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":13020196110402,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"AMPRXBROWNBOX","requires_shipping":true,"taxable":true,"featured_image":{"id":4018661851202,"product_id":1504018858050,"position":1,"created_at":"2018-08-08T10:40:57-04:00","updated_at":"2018-08-08T10:40:58-04:00","alt":"AmpRX BrownBox Attenuator","width":1300,"height":1300,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/AmpRX_BrownBox_01.jpg?v=1533739258","variant_ids":[13020196110402]},"available":true,"name":"AmpRX BrownBox Tube Amplifier Input Voltage Attenuator","public_title":null,"options":["Default Title"],"price":34900,"weight":0,"compare_at_price":0,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"AMPRXBROWNBOX"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/AmpRX_BrownBox_01.jpg?v=1533739258","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/AmpRX_BrownBox_02.jpg?v=1558888938","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/AmpRX_BrownBox_03.jpg?v=1558888938"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/AmpRX_BrownBox_01.jpg?v=1533739258","options":["Title"],"content":"BrownBox Voltage Optimization Device for Tube Amplifiers\u003cbr\u003e\u003cbr\u003eBrownBox was created to provide a safe range of voltage reduction levels for vintage tube amplifier designs. The same, era-correct voltage levels that the amps were designed around. AmpRX products can also be used with modern solid state amp designs protecting them from potential over voltage conditions. \u003cbr\u003e\u003cbr\u003eThe dynamics of a vintage amp supplied with the proper line voltage are optimized and will sound and respond as originally intended, revealing the circuits true harmonic content. This is the starting point, the basis of the signal chain, and where serious musicians begin creating a signature tone. \u003cbr\u003e\u003cbr\u003eMost vintage tube amps respond more harmonically and touch sensitive with optimized voltage. Placing these circuits back into balance reveals the authentic tone fundamental of the amp, tone that can truly blossom. \u003cbr\u003e\u003cbr\u003eFor the Tube Tone Purist, no pedal or attenuator can come close to replicating the heavenly response of dry, purely saturated tubes. Pedals and attenuators have their place, keeping in mind that they color your tone, not create it.\u003cbr\u003e\u003cbr\u003eEveryone can enjoy multi-dimensional pure tube tone, if they just know where to start. \u003cbr\u003e\u003cbr\u003eBrownBox is not a variac. Unlike a variac, Brownbox cannot accidentally harm or destroy your amplifier. The maximum input voltage available using BrownBox is your regional line wall voltage, in bypass mode. All other selections are reduction levels that you determine sound best for your amp. \u003cbr\u003e\u003cbr\u003eBrownBox employs a proprietary custom-wound toroid transformer, intended for use with one amplifier. Check you amps input wattage rating prior to use. Their proprietary transformers are custom wound exclusively for use with tube amplifier designs, but can be used with Solid state circuits.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhy Voltage Optimization?\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eVoltage Optimization provides numerous benefits:\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e• Establishes the basis for your signal chain and the starting point in building a consistent signature tone. Earlier power tube saturation equals earlier break-up at more usable volume levels . \u003cbr\u003e• A smoother tonal shift toward even order harmonics, revealing the amplifier's true designed tone fundamental . \u003cbr\u003e• Lower internal voltages = lower dissipation = longer component life.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Easy to read, back-lit L.C.D. display enabling real-time voltage and amperage monitoring, also useful for diagnostics.\u003cbr\u003e• Tough road rugged construction.\u003cbr\u003e• Proprietary Transformer designs wound exclusively for use with tube amplifiers, an industry first!\u003cbr\u003e• Filament soft-start in full reduction mode. \u003cbr\u003e• A powder coated EMF neutral housing. In-rush current protection, fused over-load protection .\u003cbr\u003e• Silent, cool operation.\u003cbr\u003e• Custom wound 5 amp proprietary transformer that will supply 540 watts max @ 120 Vac. Designed for Mid to larger sized Amps, Fender Bassman, Marshall 50s\/100S, etc or for Parallel or (DUAL) amp rigs. Be sure to Check the manufacturer's info plate on the rear of the Chassis for input watt requirements.\u003cbr\u003e• LIFETIME WARRANTY.\u003cbr\u003e• Made in the USA."}

{"id":1767538098242,"title":"Universal Audio OX Amp Top Box Reactive Amp Attenuator with Speaker Modeling","handle":"universal-audio-ox-amp-top-box-reactive-amp-attenuator-with-speaker-modeling","description":"Ox Amp Top Box - Tube Amp Load Box and Attenuator with Speaker Modeling Software\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGet Legendary Studio Tones from your Tube Amp - Anywhere, at Any Volume\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOX is a premium reactive load box and guitar recording system, giving you perfectly studio-miked amp sounds from your favorite tube amp. OX lets you play and record your amp in its sweet spots - from huge clean tones and edge-of-breakup to fully cranked - at any volume level, and with mic, room, and speaker cabinet emulations at the turn of a knob. \u003cbr\u003e\u003cbr\u003eFeaturing Universal Audio’s breakthrough Dynamic Speaker Modeling, OX is the first system to accurately emulate speaker drive, breakup, and cone cry - making it the world’s finest speaker attenuator and guitar amp recording solution.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOW YOU CAN:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Play and record your tube amp in its tonal sweet spot - anywhere, at any volume, with full dynamics\u003cbr\u003e• Get stunning mic and guitar cabinet combinations at the turn of a RIG knob - no miking required\u003cbr\u003e• Audition, tweak, and save more than 100 jaw-dropping custom Rigs from compatible iPad or Mac\/Windows computers\u003cbr\u003e• Get authentic “edge of destruction” sounds, complete with UA Dynamic Room Modeling, speaker breakup, and cone cry\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe World’s Best Reactive Load Box\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eWith decades of analog hardware engineering expertise, Universal Audio’s dream team of engineers set out to design a reactive load box that retains the tone, dynamics, and feel of your tube amp - no matter how much it’s attenuated. The goal was for your tube amp to “see” OX as an actual speaker - with continuously variable impedance and response - so you don’t lose a drop of tone or playing dynamics.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eA Complete Guitar Recording System\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOX’s front-panel, six-position RIG control allows you to quickly choose from complete setups - including emulated speaker cabinets, close mics, ambient room mics, and up to four simultaneous studio effects. OX is also the only guitar recording system to offer a complete selection of expertly placed room mics, giving you the authentic experience of pushing air while recording your cranked amp in a world-class tracking room.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDynamic Speaker Modeling\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eUA’s groundbreaking Dynamic Speaker Modeling faithfully emulates speaker breakup, drive, and cone cry - an essential ingredient to authentic tube amp tones. Using the Speaker Breakup knob in the OX app, you can control the harmonics and sonic complexity that occurs only at certain frequencies and volume levels on various speakers - far beyond a static Impulse Response system - giving you the same sonic phenomenon that occurs with a real speaker cabinet.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eA Beautiful Software App\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eMost guitar products do digital awkwardly. They’re ugly and hard to understand. The OX software app, on the other hand, offers slick, intuitive control over all of OX’s RIG settings via Wi-Fi - letting you tweak, store and recall hundreds of presets from your iPad, Mac, or Windows 10 computer. You can then save your six favorite tones onto OX’s front-panel RIG knob for instant recall in the studio or at a gig.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eAll The Right Connections\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eNot only does OX Amp Top Box feature a front-panel headphone jack for silent practice with your cranked tube amp, it also sports a bevy of connections for all kinds of recording and live workflows. Stereo S\/PDIF digital outputs via RCA and optical TOSLINK, as well as balanced TRS stereo line outputs with front panel level control, give you the necessary connections for studio monitors, DAW, or live mixing console inputs.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Premium, no-compromise analog reactive load box and guitar recording system for tube guitar amps \u003cbr\u003e• Instant album-quality mic and speaker cabinet tones via front-panel RIG knob \u003cbr\u003e• Get record-ready sounds quickly with expertly-placed virtual mics and cabs - no amp miking needed \u003cbr\u003e• Five finely-tuned guitar amp attenuation levels, from off to whisper quiet to full band volume \u003cbr\u003e• UA Dynamic Speaker Modeling emulates speaker drive, breakup and cone cry \u003cbr\u003e• World-class Universal Audio EQ, compression, delay, and reverb effects built-in \u003cbr\u003e• Selectable 4, 8, and 16-ohm operation \u003cbr\u003e• Front-panel Headphone out for silent practice with cranked tones \u003cbr\u003e• Balanced TRS line outs and S\/PDIF digital outs for stereo recording \u003cbr\u003e• Pair with OX mobile or desktop app over Wi-Fi for editing and saving Rig presets \u003cbr\u003e• Fanless design for silent operation","published_at":"2019-03-06T11:32:03-05:00","created_at":"2019-03-06T11:32:03-05:00","vendor":"Universal Audio","type":"Amplifiers","tags":["Brand_Universal Audio","New","reverbsync-offers:off","reverbsync-shipping-profile:free","Type_Power Attenuators"],"price":129900,"price_min":129900,"price_max":129900,"available":true,"price_varies":false,"compare_at_price":162900,"compare_at_price_min":162900,"compare_at_price_max":162900,"compare_at_price_varies":false,"variants":[{"id":14551523655746,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"819937002397","requires_shipping":true,"taxable":true,"featured_image":{"id":4804231692354,"product_id":1767538098242,"position":1,"created_at":"2019-03-06T11:32:03-05:00","updated_at":"2019-03-06T11:32:03-05:00","alt":"UA OX-Amp Top Box Attenuator","width":1411,"height":1411,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Universal_OxAmpTopBox_01.jpg?v=1551889923","variant_ids":[14551523655746]},"available":true,"name":"Universal Audio OX Amp Top Box Reactive Amp Attenuator with Speaker Modeling","public_title":null,"options":["Default Title"],"price":129900,"weight":0,"compare_at_price":162900,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"819937002397"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Universal_OxAmpTopBox_01.jpg?v=1551889923","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Universal_OxAmpTopBox_02.jpg?v=1551891116","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Universal_OxAmpTopBox_03.jpg?v=1551891117","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Universal_OxAmpTopBox_04.jpg?v=1551891118","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Universal_OxAmpTopBox_05.jpg?v=1551891119","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Universal_OxAmpTopBox_06.jpg?v=1551891120"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Universal_OxAmpTopBox_01.jpg?v=1551889923","options":["Title"],"content":"Ox Amp Top Box - Tube Amp Load Box and Attenuator with Speaker Modeling Software\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGet Legendary Studio Tones from your Tube Amp - Anywhere, at Any Volume\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOX is a premium reactive load box and guitar recording system, giving you perfectly studio-miked amp sounds from your favorite tube amp. OX lets you play and record your amp in its sweet spots - from huge clean tones and edge-of-breakup to fully cranked - at any volume level, and with mic, room, and speaker cabinet emulations at the turn of a knob. \u003cbr\u003e\u003cbr\u003eFeaturing Universal Audio’s breakthrough Dynamic Speaker Modeling, OX is the first system to accurately emulate speaker drive, breakup, and cone cry - making it the world’s finest speaker attenuator and guitar amp recording solution.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOW YOU CAN:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Play and record your tube amp in its tonal sweet spot - anywhere, at any volume, with full dynamics\u003cbr\u003e• Get stunning mic and guitar cabinet combinations at the turn of a RIG knob - no miking required\u003cbr\u003e• Audition, tweak, and save more than 100 jaw-dropping custom Rigs from compatible iPad or Mac\/Windows computers\u003cbr\u003e• Get authentic “edge of destruction” sounds, complete with UA Dynamic Room Modeling, speaker breakup, and cone cry\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe World’s Best Reactive Load Box\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eWith decades of analog hardware engineering expertise, Universal Audio’s dream team of engineers set out to design a reactive load box that retains the tone, dynamics, and feel of your tube amp - no matter how much it’s attenuated. The goal was for your tube amp to “see” OX as an actual speaker - with continuously variable impedance and response - so you don’t lose a drop of tone or playing dynamics.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eA Complete Guitar Recording System\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOX’s front-panel, six-position RIG control allows you to quickly choose from complete setups - including emulated speaker cabinets, close mics, ambient room mics, and up to four simultaneous studio effects. OX is also the only guitar recording system to offer a complete selection of expertly placed room mics, giving you the authentic experience of pushing air while recording your cranked amp in a world-class tracking room.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDynamic Speaker Modeling\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eUA’s groundbreaking Dynamic Speaker Modeling faithfully emulates speaker breakup, drive, and cone cry - an essential ingredient to authentic tube amp tones. Using the Speaker Breakup knob in the OX app, you can control the harmonics and sonic complexity that occurs only at certain frequencies and volume levels on various speakers - far beyond a static Impulse Response system - giving you the same sonic phenomenon that occurs with a real speaker cabinet.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eA Beautiful Software App\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eMost guitar products do digital awkwardly. They’re ugly and hard to understand. The OX software app, on the other hand, offers slick, intuitive control over all of OX’s RIG settings via Wi-Fi - letting you tweak, store and recall hundreds of presets from your iPad, Mac, or Windows 10 computer. You can then save your six favorite tones onto OX’s front-panel RIG knob for instant recall in the studio or at a gig.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eAll The Right Connections\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eNot only does OX Amp Top Box feature a front-panel headphone jack for silent practice with your cranked tube amp, it also sports a bevy of connections for all kinds of recording and live workflows. Stereo S\/PDIF digital outputs via RCA and optical TOSLINK, as well as balanced TRS stereo line outputs with front panel level control, give you the necessary connections for studio monitors, DAW, or live mixing console inputs.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Premium, no-compromise analog reactive load box and guitar recording system for tube guitar amps \u003cbr\u003e• Instant album-quality mic and speaker cabinet tones via front-panel RIG knob \u003cbr\u003e• Get record-ready sounds quickly with expertly-placed virtual mics and cabs - no amp miking needed \u003cbr\u003e• Five finely-tuned guitar amp attenuation levels, from off to whisper quiet to full band volume \u003cbr\u003e• UA Dynamic Speaker Modeling emulates speaker drive, breakup and cone cry \u003cbr\u003e• World-class Universal Audio EQ, compression, delay, and reverb effects built-in \u003cbr\u003e• Selectable 4, 8, and 16-ohm operation \u003cbr\u003e• Front-panel Headphone out for silent practice with cranked tones \u003cbr\u003e• Balanced TRS line outs and S\/PDIF digital outs for stereo recording \u003cbr\u003e• Pair with OX mobile or desktop app over Wi-Fi for editing and saving Rig presets \u003cbr\u003e• Fanless design for silent operation"}

{"id":1818069336130,"title":"Friedman Mic No Mo Passive Guitar Cabinet Emulated DI Box","handle":"friedman-mic-no-mo-passive-guitar-cabinet-emulated-di-box","description":"The MIC-NO-MO may be the easiest, best-sounding, and the most-consistent tonal solution you can add to your rig. So, whether you’re a guitarist searching for Friedman-quality tone night after night or a sound engineer who knows there’s got to be an easier way, you owe it to yourself and your audience to try the Friedman MIC-NO-MO.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eMIC-NO-MO Features:\u003cbr\u003e\u003cbr\u003eFront Panel\u003cbr\u003eFrom amp: Connect to your amplifier’s speaker output with a ¼” speaker cable\u003cbr\u003eTo speaker: Connect to your speakers (cabinet) with a ¼” speaker cable\u003cbr\u003e\u003cbr\u003eBack Panel\u003cbr\u003eBalanced output: Connect to a mixer or interface with an XLR cable\u003cbr\u003eGround lift: 2-position switch eliminates ground loops\u003cbr\u003eAxis: Select between the brighter center or darker edge simulated mic placements\u003cbr\u003eLevel: Select between a -10 dB to -30 dB pad for proper pairing with other audio equipment\u003cbr\u003e\u003cbr\u003e*NOTE: The MIC-NO-MO is not a load box. ALWAYS use with an appropriate speaker cab.","published_at":"2019-04-10T17:53:37-04:00","created_at":"2019-04-10T17:53:37-04:00","vendor":"Friedman","type":"Amplifiers","tags":["Brand_Friedman","New","reverbsync-offers:off","reverbsync-shipping-profile:free","Type_DI Boxes"],"price":9900,"price_min":9900,"price_max":9900,"available":true,"price_varies":false,"compare_at_price":0,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15121697996866,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"763815130521","requires_shipping":true,"taxable":true,"featured_image":{"id":5058441478210,"product_id":1818069336130,"position":1,"created_at":"2019-04-10T17:53:37-04:00","updated_at":"2019-04-10T17:53:37-04:00","alt":"Friedman Mic No Mo Cab Sim","width":2000,"height":2000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Friedman_Mic_No_Mo_01.jpg?v=1554933217","variant_ids":[15121697996866]},"available":true,"name":"Friedman Mic No Mo Passive Guitar Cabinet Emulated DI Box","public_title":null,"options":["Default Title"],"price":9900,"weight":0,"compare_at_price":0,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"763815130521"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Friedman_Mic_No_Mo_01.jpg?v=1554933217","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Friedman_Mic_No_Mo_02.jpg?v=1554934860","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Friedman_Mic_No_Mo_03.jpg?v=1554934862","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Friedman_Mic_No_Mo_04.jpg?v=1554934863","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Friedman_Mic_No_Mo_05.jpg?v=1554934865"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Friedman_Mic_No_Mo_01.jpg?v=1554933217","options":["Title"],"content":"The MIC-NO-MO may be the easiest, best-sounding, and the most-consistent tonal solution you can add to your rig. So, whether you’re a guitarist searching for Friedman-quality tone night after night or a sound engineer who knows there’s got to be an easier way, you owe it to yourself and your audience to try the Friedman MIC-NO-MO.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eMIC-NO-MO Features:\u003cbr\u003e\u003cbr\u003eFront Panel\u003cbr\u003eFrom amp: Connect to your amplifier’s speaker output with a ¼” speaker cable\u003cbr\u003eTo speaker: Connect to your speakers (cabinet) with a ¼” speaker cable\u003cbr\u003e\u003cbr\u003eBack Panel\u003cbr\u003eBalanced output: Connect to a mixer or interface with an XLR cable\u003cbr\u003eGround lift: 2-position switch eliminates ground loops\u003cbr\u003eAxis: Select between the brighter center or darker edge simulated mic placements\u003cbr\u003eLevel: Select between a -10 dB to -30 dB pad for proper pairing with other audio equipment\u003cbr\u003e\u003cbr\u003e*NOTE: The MIC-NO-MO is not a load box. ALWAYS use with an appropriate speaker cab."}