PA Power Amplifiers

{"id":1434919501890,"title":"Behringer NX3000 Ultra-Lightweight 3000-Watt Power Amp with Loudspeaker Impedance Compensation","handle":"behringer-nx3000-ultra-lightweight-3000-watt-power-amp-with-loudspeaker-impedance-compensation","description":"NX3000 Ultra-Lightweight 3000-Watt Class-D Power Amplifier\u003cbr\u003e\u003cbr\u003eThe NX3000 power amplifier packs 3000 Watts (2 x 1500 Watts @ 2 Ohms; 2 x 900 Watts @ 4 Ohms; 3000 Watts into 4 Ohms bridge mode) into exceptionally lightweight (7.7 lbs \/ 3.5 kg) and rack-mountable packages. And because the NX3000 is so much more efficient than conventional designs, it runs cooler and doesn't require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. Thanks to Behringer's \"Zero-Attack\" limiters that offer maximum output level with exceptionally-reliable overload protection and SmartSense Loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX3000 full-out for hours on-end. Their revolutionary high-density Class-D technology, combined with an ultra-efficient, switch-mode power supply ensure this feather-light powerhouse will drive your rig effortlessly for many years to come.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClass-D - Massive Power, Perfect Sound\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThanks to their High-Density Class-D amplifier Technology, they are able to provide you with enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency-and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremelypowerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSublimely Simple Operation\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe front panel controls and indicators provide your system's vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as Limit LEDs to indicate when the amplifier is running at full capacity. Just as elegant as the front, the rear panel is home to the combo XLR and 1\/4\" TRS Input connectors, making the NX3000 compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers. The rear panel is also where you'll find the switches that enable the NX3000 amp to run in your choice of dual mono, stereo or mono bridge modes. The NX3000's built-in Crossover switch sets the amp to Full-Range mode, where the output is sent unfiltered to your loudspeakers, or Bi-amp mode, which sends only the low-frequency content (\u0026lt;100 Hz) to passive subwoofers, while the high-frequency content (\u0026gt;100 Hz) is channeled to your full-range loudspeakers.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSmartSense Impedance Compensation\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBehringer's new SmartSense Technology puts the punch back into Class-D amplification, providing vastly improved full-range frequency response with more powerfully-dynamic bass, and smoother high-frequency reproduction. The resulting output is no longer dependent on the actual load, but is rendered perfectly ruler flat via impedance compensation. NX3000's design also incorporates a significantly-higher damping factor that yields better amplifier control over the loudspeaker for stronger audio reproduction especially in the LF area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSound Value\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSporting massive output ratings, lightweight Class-D technology and an equally lightweight price tag plus all the amenities a professional audio engineer could ask for the BEHRINGER NX3000 power amplifier is a serious amp for your most demanding applications. Experience the BEHRINGER NX3000 amplifier at your local dealer, or get yours online today, and find out why more and more professionals are turning to BEHRINGER amplifiers for their superb performance and extraordinary value.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Delivers 2 x 1500 Watts into 2 Ohms; 2 x 900 Watts into 4 Ohms; 3000 Watts into 4 Ohms (bridge mode) and weighs less than 7.7 lbs \/ 3.5 kg\u003cbr\u003e• Ultimate reliability through revolutionary cool-running High-Density Class-D technology with \"near-zero\" thermal buildup\u003cbr\u003e• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption\u003cbr\u003e• Built-in stereo crossover with low-cut, high-cut and full range mode\u003cbr\u003e• SmartSense Loudspeaker impedance compensation features fully linear frequency response at any speaker load impedance\u003cbr\u003e• \"Zero-Attack\" limiters offer maximum output level with reliable overload protection\u003cbr\u003e• Detented and illuminated gain controls for precise level setting\u003cbr\u003e• Precise 4-segment Signal and Limit LEDs to monitor performance\u003cbr\u003e• XLR and 1\/4'' TRS combination input connectors for compatibility with any source\u003cbr\u003e• Professional twist-lock speaker connectors for ultimate reliability\u003cbr\u003e• Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show\u003cbr\u003e• “Back-to-front” ventilation system prevents thermal buildup for reliable operation\u003cbr\u003e• 3-Year Warranty\u003cbr\u003e• Designed and engineered in Germany","published_at":"2018-07-02T10:56:55-04:00","created_at":"2018-07-02T10:56:55-04:00","vendor":"Behringer","type":"PA and Recording","tags":["Brand_Behringer","New","reverbsync-force:on","reverbsync-offers:off","reverbsync-shipping-profile:free","Type_Power Amplifiers"],"price":27999,"price_min":27999,"price_max":27999,"available":true,"price_varies":false,"compare_at_price":41999,"compare_at_price_min":41999,"compare_at_price_max":41999,"compare_at_price_varies":false,"variants":[{"id":12594777817154,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"653341314536","requires_shipping":true,"taxable":true,"featured_image":{"id":3791723331650,"product_id":1434919501890,"position":1,"created_at":"2018-07-02T10:56:55-04:00","updated_at":"2018-07-02T10:56:55-04:00","alt":"Behringer NX3000 Power Amp","width":1500,"height":1500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NX3000_01.jpg?v=1530543415","variant_ids":[12594777817154]},"available":true,"name":"Behringer NX3000 Ultra-Lightweight 3000-Watt Power Amp with Loudspeaker Impedance Compensation","public_title":null,"options":["Default Title"],"price":27999,"weight":0,"compare_at_price":41999,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"653341314536"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NX3000_01.jpg?v=1530543415","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NX3000_02.jpg?v=1530544099","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NX3000_03.jpg?v=1530544101","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NX3000_04.jpg?v=1530544102"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NX3000_01.jpg?v=1530543415","options":["Title"],"content":"NX3000 Ultra-Lightweight 3000-Watt Class-D Power Amplifier\u003cbr\u003e\u003cbr\u003eThe NX3000 power amplifier packs 3000 Watts (2 x 1500 Watts @ 2 Ohms; 2 x 900 Watts @ 4 Ohms; 3000 Watts into 4 Ohms bridge mode) into exceptionally lightweight (7.7 lbs \/ 3.5 kg) and rack-mountable packages. And because the NX3000 is so much more efficient than conventional designs, it runs cooler and doesn't require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. Thanks to Behringer's \"Zero-Attack\" limiters that offer maximum output level with exceptionally-reliable overload protection and SmartSense Loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX3000 full-out for hours on-end. Their revolutionary high-density Class-D technology, combined with an ultra-efficient, switch-mode power supply ensure this feather-light powerhouse will drive your rig effortlessly for many years to come.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClass-D - Massive Power, Perfect Sound\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThanks to their High-Density Class-D amplifier Technology, they are able to provide you with enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency-and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremelypowerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSublimely Simple Operation\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe front panel controls and indicators provide your system's vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as Limit LEDs to indicate when the amplifier is running at full capacity. Just as elegant as the front, the rear panel is home to the combo XLR and 1\/4\" TRS Input connectors, making the NX3000 compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers. The rear panel is also where you'll find the switches that enable the NX3000 amp to run in your choice of dual mono, stereo or mono bridge modes. The NX3000's built-in Crossover switch sets the amp to Full-Range mode, where the output is sent unfiltered to your loudspeakers, or Bi-amp mode, which sends only the low-frequency content (\u0026lt;100 Hz) to passive subwoofers, while the high-frequency content (\u0026gt;100 Hz) is channeled to your full-range loudspeakers.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSmartSense Impedance Compensation\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBehringer's new SmartSense Technology puts the punch back into Class-D amplification, providing vastly improved full-range frequency response with more powerfully-dynamic bass, and smoother high-frequency reproduction. The resulting output is no longer dependent on the actual load, but is rendered perfectly ruler flat via impedance compensation. NX3000's design also incorporates a significantly-higher damping factor that yields better amplifier control over the loudspeaker for stronger audio reproduction especially in the LF area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSound Value\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSporting massive output ratings, lightweight Class-D technology and an equally lightweight price tag plus all the amenities a professional audio engineer could ask for the BEHRINGER NX3000 power amplifier is a serious amp for your most demanding applications. Experience the BEHRINGER NX3000 amplifier at your local dealer, or get yours online today, and find out why more and more professionals are turning to BEHRINGER amplifiers for their superb performance and extraordinary value.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Delivers 2 x 1500 Watts into 2 Ohms; 2 x 900 Watts into 4 Ohms; 3000 Watts into 4 Ohms (bridge mode) and weighs less than 7.7 lbs \/ 3.5 kg\u003cbr\u003e• Ultimate reliability through revolutionary cool-running High-Density Class-D technology with \"near-zero\" thermal buildup\u003cbr\u003e• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption\u003cbr\u003e• Built-in stereo crossover with low-cut, high-cut and full range mode\u003cbr\u003e• SmartSense Loudspeaker impedance compensation features fully linear frequency response at any speaker load impedance\u003cbr\u003e• \"Zero-Attack\" limiters offer maximum output level with reliable overload protection\u003cbr\u003e• Detented and illuminated gain controls for precise level setting\u003cbr\u003e• Precise 4-segment Signal and Limit LEDs to monitor performance\u003cbr\u003e• XLR and 1\/4'' TRS combination input connectors for compatibility with any source\u003cbr\u003e• Professional twist-lock speaker connectors for ultimate reliability\u003cbr\u003e• Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show\u003cbr\u003e• “Back-to-front” ventilation system prevents thermal buildup for reliable operation\u003cbr\u003e• 3-Year Warranty\u003cbr\u003e• Designed and engineered in Germany"}

{"id":1434919469122,"title":"Behringer NX1000 Ultra-Lightweight 1000-Watt Power Amp with Loudspeaker Impedance Compensation","handle":"behringer-nx1000-ultra-lightweight-1000-watt-power-amp-with-loudspeaker-impedance-compensation","description":"NX1000 Ultra-Lightweight 1000-Watt Class-D Power Amplifier\u003cbr\u003e\u003cbr\u003eThe NX1000 power amplifier packs 1000 Watts (2 x 500 Watts @ 2 Ohms; 2 x 300 Watts @ 4 Ohms; 1000 Watts into 4 Ohms bridge mode) into exceptionally lightweight (7.3 lbs \/ 3.3 kg) and rack-mountable packages. And because the NX1000 is so much more efficient than conventional designs, it runs cooler and doesn’t require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. Thanks to Behringer's “Zero-Attack” limiters that offer maximum output level with exceptionally-reliable overload protection and SmartSense Loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX1000 full-out for hours on-end. Their revolutionary high-density Class-D technology, combined with an ultra-efficient, switch-mode power supply ensure this feather-light powerhouse will drive your rig effortlessly for many years to come.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClass-D - Massive Power, Perfect Sound\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThanks to Their High-Density Class-D amplifier Technology, they are able to provide you with enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency – and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremelypowerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimely Simple Operation\u003cbr\u003e\u003cbr\u003eThe front panel controls and indicators provide your system’s vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as Limit LEDs to indicate when the amplifier is running at full capacity. Just as elegant as the front, the rear panel is home to the combo XLR and 1\/4\" TRS Input connectors, making the NX1000 compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers.\u003cbr\u003e\u003cbr\u003eThe rear panel is also where you’ll find the switches that enable the NX1000 amp to run in your choice of dual mono, stereo or mono bridge modes. The NX1000’s built-in Crossover switch sets the amp to Full-Range mode, where the output is sent unfiltered to your loudspeakers, or Bi-amp mode, which sends only the low-frequency content (\u0026lt;100 Hz) to passive subwoofers, while the high-frequency content (\u0026gt;100 Hz) is channeled to your full-range loudspeakers.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSmartSense Impedance Compensation\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBehringer's new SmartSense Technology puts the punch back into Class-D amplification, providing vastly improved full-range frequency response with more powerfully-dynamic bass, and smoother high-frequency reproduction. The resulting output is no longer dependent on the actual load, but is rendered perfectly ruler flat via impedance compensation. NX1000’s design also incorporates a significantly-higher damping factor that yields better amplifier control over the loudspeaker for stronger audio reproduction – especially in the LF area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSound Value\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSporting massive output ratings, lightweight Class-D technology and an equally lightweight price tag – plus all the amenities a professional audio engineer could ask for – the BEHRINGER NX1000 power amplifier is a serious amp for your most demanding applications.\u003cbr\u003e\u003cbr\u003eExperience the BEHRINGER NX1000 amplifier at your local dealer, or get yours online today, and find out why more and more professionals are turning to BEHRINGER amplifiers for their superb performance and extraordinary value.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Delivers 2 x 500 Watts into 2 Ohms; 2 x 300 Watts into 4 Ohms; 1000 Watts into 4 Ohms (bridge mode) and weighs less than 7.3 lbs \/ 3.3 kg\u003cbr\u003e• Ultimate reliability through revolutionary cool-running High-Density Class-D technology with \"near-zero\" thermal buildup\u003cbr\u003e• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption\u003cbr\u003e• Built-in stereo crossover with low-cut, high-cut and full range mode\u003cbr\u003e• SmartSense Loudspeaker impedance compensation features fully linear frequency response at any speaker load impedance\u003cbr\u003e• \"Zero-Attack\" limiters offer maximum output level with reliable overload protection\u003cbr\u003e• Detented and illuminated gain controls for precise level setting\u003cbr\u003e• Precise 4-segment Signal and Limit LEDs to monitor performance\u003cbr\u003e• XLR and 1\/4'' TRS combination input connectors for compatibility with any source\u003cbr\u003e• Professional twist-lock speaker connectors for ultimate reliability\u003cbr\u003e• Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show\u003cbr\u003e• “Back-to-front” ventilation system prevents thermal buildup for reliable operation\u003cbr\u003e• 3-Year Warranty\u003cbr\u003e• Designed and engineered in Germany","published_at":"2018-07-02T10:56:51-04:00","created_at":"2018-07-02T10:56:51-04:00","vendor":"Behringer","type":"PA and Recording","tags":["Brand_Behringer","New","reverbsync-offers:off","reverbsync-shipping-profile:free","Type_Power Amplifiers"],"price":19999,"price_min":19999,"price_max":19999,"available":true,"price_varies":false,"compare_at_price":29999,"compare_at_price_min":29999,"compare_at_price_max":29999,"compare_at_price_varies":false,"variants":[{"id":12594777587778,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"653341314338","requires_shipping":true,"taxable":true,"featured_image":{"id":3791723233346,"product_id":1434919469122,"position":1,"created_at":"2018-07-02T10:56:52-04:00","updated_at":"2018-07-02T10:56:52-04:00","alt":"Behringer NX1000 Power Amp","width":2018,"height":2018,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NX1000_01.jpg?v=1530543412","variant_ids":[12594777587778]},"available":true,"name":"Behringer NX1000 Ultra-Lightweight 1000-Watt Power Amp with Loudspeaker Impedance Compensation","public_title":null,"options":["Default Title"],"price":19999,"weight":0,"compare_at_price":29999,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"653341314338"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NX1000_01.jpg?v=1530543412","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NX1000_02.jpg?v=1530543883","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NX1000_03.jpg?v=1530543885","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NX1000_04.jpg?v=1530543886"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NX1000_01.jpg?v=1530543412","options":["Title"],"content":"NX1000 Ultra-Lightweight 1000-Watt Class-D Power Amplifier\u003cbr\u003e\u003cbr\u003eThe NX1000 power amplifier packs 1000 Watts (2 x 500 Watts @ 2 Ohms; 2 x 300 Watts @ 4 Ohms; 1000 Watts into 4 Ohms bridge mode) into exceptionally lightweight (7.3 lbs \/ 3.3 kg) and rack-mountable packages. And because the NX1000 is so much more efficient than conventional designs, it runs cooler and doesn’t require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. Thanks to Behringer's “Zero-Attack” limiters that offer maximum output level with exceptionally-reliable overload protection and SmartSense Loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX1000 full-out for hours on-end. Their revolutionary high-density Class-D technology, combined with an ultra-efficient, switch-mode power supply ensure this feather-light powerhouse will drive your rig effortlessly for many years to come.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClass-D - Massive Power, Perfect Sound\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThanks to Their High-Density Class-D amplifier Technology, they are able to provide you with enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency – and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremelypowerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSublimely Simple Operation\u003cbr\u003e\u003cbr\u003eThe front panel controls and indicators provide your system’s vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as Limit LEDs to indicate when the amplifier is running at full capacity. Just as elegant as the front, the rear panel is home to the combo XLR and 1\/4\" TRS Input connectors, making the NX1000 compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers.\u003cbr\u003e\u003cbr\u003eThe rear panel is also where you’ll find the switches that enable the NX1000 amp to run in your choice of dual mono, stereo or mono bridge modes. The NX1000’s built-in Crossover switch sets the amp to Full-Range mode, where the output is sent unfiltered to your loudspeakers, or Bi-amp mode, which sends only the low-frequency content (\u0026lt;100 Hz) to passive subwoofers, while the high-frequency content (\u0026gt;100 Hz) is channeled to your full-range loudspeakers.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSmartSense Impedance Compensation\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBehringer's new SmartSense Technology puts the punch back into Class-D amplification, providing vastly improved full-range frequency response with more powerfully-dynamic bass, and smoother high-frequency reproduction. The resulting output is no longer dependent on the actual load, but is rendered perfectly ruler flat via impedance compensation. NX1000’s design also incorporates a significantly-higher damping factor that yields better amplifier control over the loudspeaker for stronger audio reproduction – especially in the LF area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSound Value\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSporting massive output ratings, lightweight Class-D technology and an equally lightweight price tag – plus all the amenities a professional audio engineer could ask for – the BEHRINGER NX1000 power amplifier is a serious amp for your most demanding applications.\u003cbr\u003e\u003cbr\u003eExperience the BEHRINGER NX1000 amplifier at your local dealer, or get yours online today, and find out why more and more professionals are turning to BEHRINGER amplifiers for their superb performance and extraordinary value.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• Delivers 2 x 500 Watts into 2 Ohms; 2 x 300 Watts into 4 Ohms; 1000 Watts into 4 Ohms (bridge mode) and weighs less than 7.3 lbs \/ 3.3 kg\u003cbr\u003e• Ultimate reliability through revolutionary cool-running High-Density Class-D technology with \"near-zero\" thermal buildup\u003cbr\u003e• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption\u003cbr\u003e• Built-in stereo crossover with low-cut, high-cut and full range mode\u003cbr\u003e• SmartSense Loudspeaker impedance compensation features fully linear frequency response at any speaker load impedance\u003cbr\u003e• \"Zero-Attack\" limiters offer maximum output level with reliable overload protection\u003cbr\u003e• Detented and illuminated gain controls for precise level setting\u003cbr\u003e• Precise 4-segment Signal and Limit LEDs to monitor performance\u003cbr\u003e• XLR and 1\/4'' TRS combination input connectors for compatibility with any source\u003cbr\u003e• Professional twist-lock speaker connectors for ultimate reliability\u003cbr\u003e• Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show\u003cbr\u003e• “Back-to-front” ventilation system prevents thermal buildup for reliable operation\u003cbr\u003e• 3-Year Warranty\u003cbr\u003e• Designed and engineered in Germany"}

{"id":11355595534,"title":"Behringer NU6000 iNuke Ultra-Lightweight, High-Density 6000-Watt Power Amplifier","handle":"behringer-nu6000-inuke-ultra-lightweight-high-density-6000-watt-power-amplifier","description":"\u003cstrong\u003eBehringer NU6000 iNuke Ultra-Lightweight, High-Density 6000-Watt Power Amplifier \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBehringer's iNUKE Series power amplifiers pack massive amounts of output power into exceptionally lightweight, rack-mountable packages. Behringer's revolutionary high-density Class-D technology combined with ultra-efficient switch-mode power supplies ensures these feather-light powerhouses will drive your rig effortlessly for many years to come. Superb transient response. They spent years fine-tuning the high-density Class-D technology that gives the iNUKE Series its oomph. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of their circuitry, these amps react instantly to even the most demanding electronic bass impulses. When this amazing amplifier technology is combined with Behringer's state-of-the-art switching-mode power supplies, these amplifiers provide tremendous punch. And because they are so much more efficient than conventional designs, they run cooler and don't require the massive heat sinks and heavy toroid transformers typically associated with their conventional counterparts. This item has a built-in fuse in the UL version is designed only for use in the USA and Canada. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003cbr\u003e• Delivers 2 x 3000 Watts into 4 Ohms, 2 x 1500 Watts into 8 Ohms and weighs less than 12 lbs\/5.5 kg \u003cbr\u003e• Ultimate reliability through revolutionary cool-running High-Density Class-D technology with \"near-zero\" thermal buildup \u003cbr\u003e• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption \u003cbr\u003e• \"Zero-Attack\" limiters offer maximum output level with reliable overload protection \u003cbr\u003e• Built-in Subwoofer\/Satellite crossover for perfect subwoofer operation \u003cbr\u003e","published_at":"2017-09-06T10:49:10-04:00","created_at":"2017-09-06T10:49:10-04:00","vendor":"Behringer","type":"PA and Recording","tags":["Brand_Behringer","reverbsync-offers:off","reverbsync-shipping-profile:free","Type_Power Amplifiers"],"price":34999,"price_min":34999,"price_max":34999,"available":false,"price_varies":false,"compare_at_price":52499,"compare_at_price_min":52499,"compare_at_price_max":52499,"compare_at_price_varies":false,"variants":[{"id":45056251918,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"748252142948","requires_shipping":true,"taxable":true,"featured_image":{"id":26899025486,"product_id":11355595534,"position":1,"created_at":"2017-09-06T10:49:10-04:00","updated_at":"2017-09-06T10:49:10-04:00","alt":"Behringer NU6000 Power Amp","width":1152,"height":1152,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NU6000_PowerAmp.jpg?v=1504709350","variant_ids":[45056251918]},"available":false,"name":"Behringer NU6000 iNuke Ultra-Lightweight, High-Density 6000-Watt Power Amplifier","public_title":null,"options":["Default Title"],"price":34999,"weight":0,"compare_at_price":52499,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"748252142948"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NU6000_PowerAmp.jpg?v=1504709350","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NU6000_PowerAmp_2.jpg?v=1505252364","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NU6000_PowerAmp_3.jpg?v=1505312318","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NU6000_PowerAmp_4.jpg?v=1505327448"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NU6000_PowerAmp.jpg?v=1504709350","options":["Title"],"content":"\u003cstrong\u003eBehringer NU6000 iNuke Ultra-Lightweight, High-Density 6000-Watt Power Amplifier \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBehringer's iNUKE Series power amplifiers pack massive amounts of output power into exceptionally lightweight, rack-mountable packages. Behringer's revolutionary high-density Class-D technology combined with ultra-efficient switch-mode power supplies ensures these feather-light powerhouses will drive your rig effortlessly for many years to come. Superb transient response. They spent years fine-tuning the high-density Class-D technology that gives the iNUKE Series its oomph. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of their circuitry, these amps react instantly to even the most demanding electronic bass impulses. When this amazing amplifier technology is combined with Behringer's state-of-the-art switching-mode power supplies, these amplifiers provide tremendous punch. And because they are so much more efficient than conventional designs, they run cooler and don't require the massive heat sinks and heavy toroid transformers typically associated with their conventional counterparts. This item has a built-in fuse in the UL version is designed only for use in the USA and Canada. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003cbr\u003e• Delivers 2 x 3000 Watts into 4 Ohms, 2 x 1500 Watts into 8 Ohms and weighs less than 12 lbs\/5.5 kg \u003cbr\u003e• Ultimate reliability through revolutionary cool-running High-Density Class-D technology with \"near-zero\" thermal buildup \u003cbr\u003e• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption \u003cbr\u003e• \"Zero-Attack\" limiters offer maximum output level with reliable overload protection \u003cbr\u003e• Built-in Subwoofer\/Satellite crossover for perfect subwoofer operation \u003cbr\u003e"}

{"id":11355595406,"title":"Behringer NU3000 iNuke Ultra-Lightweight, High-Density 3000-Watt Power Amplifier","handle":"behringer-nu3000-inuke-ultra-lightweight-high-density-3000-watt-power-amplifier","description":"\u003cstrong\u003eBehringer NU3000 iNuke Ultra-Lightweight, High-Density 3000-Watt Power Amplifier \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe iNUKE NU3000, like the rest of the iNUKE Series power amplifiers, packs massive amounts of output power into an exceptionally lightweight, rackmountable package. Behringer's revolutionary high-density Class-D technology combined with ultra-efficient switch-mode power supplies ensures this feather-light powerhouse will drive your rig effortlessly for many years to come.\u003cbr\u003e\u003cbr\u003eSuperb transient response\u003cbr\u003eBehringer spent years fine-tuning the high-density Class-D technology that gives the iNUKE Series its oomph. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of the circuitry, this amp reacts instantly to even the most demanding electronic bass impulses.\u003cbr\u003e\u003cbr\u003eWhen this amazing amplifier technology is combined with Behringer's state-of-the-art switching-mode power supplies, this amplifiers= provides tremendous punch. And, because it is so much more efficient than conventional designs, it runs cooler and doesn't require the massive heat sinks and heavy toroid transformers typically associated with other conventional counterparts.\u003cbr\u003e\u003cbr\u003eSublimely simple operation\u003cbr\u003eThe front panel controls and indicators provide your system's vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as clip LEDs to indicate when the signal is distorted and you need to reduce the input signal.\u003cbr\u003e\u003cbr\u003eThe rear panel is just as elegant, with combo XLR and 1\/4\" TRS input connectors making the iNUKE NU3000 compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers.The rear panel is also where you'll find the switches that enable iNUKE amps to work in either dual mono, stereo or mono bridge mode. A built-in CROSSOVER switch enables the amp to operate in bi-amp mode, sending low frequency content to passive subwoofers, while the high-frequency output is channeled to full-range loudspeakers (CH1\u0026gt;100 Hz \/ CH2\u0026lt;100 Hz or FULLRANGE). Flick the LIMITER ON\/OFF switch to activate the built-in overload protection, or turn it off if you're feeling lucky.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003cbr\u003e• Delivers 2 x 1500 Watts into 2 Ohms; 2 x 880 Watts into 4 Ohms; 3000 Watts into 4 Ohms (bridge mode) and weighs less than 7 lb. \/ 3.3 kg\u003cbr\u003e• Ultimate reliability through revolutionary cool-running High-Density Class-D technology with \"near-zero\" thermal buildup\u003cbr\u003e• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption\u003cbr\u003e• \"Zero-Attack\" limiters offer maximum output level with reliable overload protection\u003cbr\u003e• Built-in Subwoofer\/Satellite crossover for perfect subwoofer operation\u003cbr\u003e• Detented and illuminated gain controls for precise level setting\u003cbr\u003e• Precise 4-segment Signal and Limit LEDs to monitor performance\u003cbr\u003e• XLR and 1\/4\" TRS combination input connectors for compatibility with any source\u003cbr\u003e• Professional twist-lock speaker connectors for ultimate reliability\u003cbr\u003e• Independent DC, LF, and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show\u003cbr\u003e• \"Back-to-front\" ventilation system prevents thermal buildup for reliable operation\u003cbr\u003e\u003cbr\u003e","published_at":"2017-09-06T10:49:07-04:00","created_at":"2017-09-06T10:49:07-04:00","vendor":"Behringer","type":"PA and Recording","tags":["Brand_Behringer","reverbsync-offers:off","reverbsync-shipping-profile:free","Type_Power Amplifiers"],"price":22999,"price_min":22999,"price_max":22999,"available":true,"price_varies":false,"compare_at_price":34499,"compare_at_price_min":34499,"compare_at_price_max":34499,"compare_at_price_varies":false,"variants":[{"id":45056251790,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"748252142849","requires_shipping":true,"taxable":true,"featured_image":{"id":26899024398,"product_id":11355595406,"position":1,"created_at":"2017-09-06T10:49:07-04:00","updated_at":"2017-09-06T10:49:07-04:00","alt":"Behringer NU3000 Power Amp","width":1080,"height":1080,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NU3000_PowerAmp.jpg?v=1504709347","variant_ids":[45056251790]},"available":true,"name":"Behringer NU3000 iNuke Ultra-Lightweight, High-Density 3000-Watt Power Amplifier","public_title":null,"options":["Default Title"],"price":22999,"weight":0,"compare_at_price":34499,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"748252142849"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NU3000_PowerAmp.jpg?v=1504709347","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NU3000_PowerAmp_2.jpg?v=1505252362","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NU3000_PowerAmp_3.jpg?v=1505312317","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NU3000_PowerAmp_4.jpg?v=1505327446"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NU3000_PowerAmp.jpg?v=1504709347","options":["Title"],"content":"\u003cstrong\u003eBehringer NU3000 iNuke Ultra-Lightweight, High-Density 3000-Watt Power Amplifier \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe iNUKE NU3000, like the rest of the iNUKE Series power amplifiers, packs massive amounts of output power into an exceptionally lightweight, rackmountable package. Behringer's revolutionary high-density Class-D technology combined with ultra-efficient switch-mode power supplies ensures this feather-light powerhouse will drive your rig effortlessly for many years to come.\u003cbr\u003e\u003cbr\u003eSuperb transient response\u003cbr\u003eBehringer spent years fine-tuning the high-density Class-D technology that gives the iNUKE Series its oomph. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of the circuitry, this amp reacts instantly to even the most demanding electronic bass impulses.\u003cbr\u003e\u003cbr\u003eWhen this amazing amplifier technology is combined with Behringer's state-of-the-art switching-mode power supplies, this amplifiers= provides tremendous punch. And, because it is so much more efficient than conventional designs, it runs cooler and doesn't require the massive heat sinks and heavy toroid transformers typically associated with other conventional counterparts.\u003cbr\u003e\u003cbr\u003eSublimely simple operation\u003cbr\u003eThe front panel controls and indicators provide your system's vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as clip LEDs to indicate when the signal is distorted and you need to reduce the input signal.\u003cbr\u003e\u003cbr\u003eThe rear panel is just as elegant, with combo XLR and 1\/4\" TRS input connectors making the iNUKE NU3000 compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers.The rear panel is also where you'll find the switches that enable iNUKE amps to work in either dual mono, stereo or mono bridge mode. A built-in CROSSOVER switch enables the amp to operate in bi-amp mode, sending low frequency content to passive subwoofers, while the high-frequency output is channeled to full-range loudspeakers (CH1\u0026gt;100 Hz \/ CH2\u0026lt;100 Hz or FULLRANGE). Flick the LIMITER ON\/OFF switch to activate the built-in overload protection, or turn it off if you're feeling lucky.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003cbr\u003e• Delivers 2 x 1500 Watts into 2 Ohms; 2 x 880 Watts into 4 Ohms; 3000 Watts into 4 Ohms (bridge mode) and weighs less than 7 lb. \/ 3.3 kg\u003cbr\u003e• Ultimate reliability through revolutionary cool-running High-Density Class-D technology with \"near-zero\" thermal buildup\u003cbr\u003e• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption\u003cbr\u003e• \"Zero-Attack\" limiters offer maximum output level with reliable overload protection\u003cbr\u003e• Built-in Subwoofer\/Satellite crossover for perfect subwoofer operation\u003cbr\u003e• Detented and illuminated gain controls for precise level setting\u003cbr\u003e• Precise 4-segment Signal and Limit LEDs to monitor performance\u003cbr\u003e• XLR and 1\/4\" TRS combination input connectors for compatibility with any source\u003cbr\u003e• Professional twist-lock speaker connectors for ultimate reliability\u003cbr\u003e• Independent DC, LF, and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show\u003cbr\u003e• \"Back-to-front\" ventilation system prevents thermal buildup for reliable operation\u003cbr\u003e\u003cbr\u003e"}

{"id":11355595278,"title":"Behringer NU1000 Ultra-Lightweight, High-Densit","handle":"behringer-nu1000-ultra-lightweight-high-densit","description":"\u003cstrong\u003eBehringer NU1000 iNuke Ultra-Lightweight, High-Density 1000-Watt Power Amplifier \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eLike all the iNUKE Series power amplifiers, the iNUKE NU1000 packs massive amounts of output power into an exceptionally lightweight, rackmountable package. Behringer's revolutionary high-density Class-D technology combined with ultra-efficient switch-mode power supplies ensures these featherlight powerhouses will drive your rig effortlessly for many years to come.\u003cbr\u003e\u003cbr\u003eSuperb transient response\u003cbr\u003eBehringer spent years fine-tuning the high-density Class-D technology that gives the iNUKE Series its oomph. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of the circuitry, these amps react instantly to even the most demanding electronic bass impulses.\u003cbr\u003e\u003cbr\u003eWhen this amplifier technology is combined with our state-of-the-art switching-mode power supplies, these amplifiers provide tremendous punch. And because they are so much more efficient than conventional designs, they run cooler and don't require the massive heat sinks and heavy toroid transformers typically associated with their conventional counterparts.\u003cbr\u003e\u003cbr\u003eSublimely simple operation\u003cbr\u003eThe front panel controls and indicators provide your system's vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as clip LEDs to indicate when the signal is distorted and you need to reduce the input signal.\u003cbr\u003e\u003cbr\u003eThe rear panel is just as elegant, with combo XLR and 1\/4\" TRS input connectors making the iNUKE compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers. The rear panel is also where you'll find the switches that enable iNUKE amps to work in either dual mono, stereo or mono bridge mode. A built-in CROSSOVER switch enables the amp to operate in biamp mode, sending low frequency content to passive subwoofers, while the high frequency output is channeled to full-range loudspeakers (CH1\u0026gt;100 Hz \/ CH2\u0026lt;100 Hz or FULLRANGE). Flick the LIMITER ON\/OFF switch to activate the built-in overload protection, or turn it off if you're feeling lucky.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003cbr\u003e• Delivers 2 x 500 Watts into 2 Ohms; 2 x 300 Watts into 4 Ohms; 1000 Watts into 4 Ohms (bridge mode) and weighs less than 7 lbs \/ 3.3 kg\u003cbr\u003e• Ultimate reliability through revolutionary cool-running High-Density Class-D technology with \"near-zero\" thermal buildup\u003cbr\u003e• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption\u003cbr\u003e• \"Zero-Attack\" limiters offer maximum output level with reliable overload protection\u003cbr\u003e• Built-in Subwoofer\/Satellite crossover for perfect subwoofer operation\u003cbr\u003e• Detented and illuminated gain controls for precise level setting\u003cbr\u003e• Precise 4-segment Signal and Limit LEDs to monitor performance\u003cbr\u003e• XLR and 1\/4'' TRS combination input connectors for compatibility with any source\u003cbr\u003e• Professional twist-lock speaker connectors for ultimate reliability\u003cbr\u003e• Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show\u003cbr\u003e• \"Back-to-front\" ventilation system prevents thermal buildup for reliable operation\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","published_at":"2017-09-06T10:49:04-04:00","created_at":"2017-09-06T10:49:04-04:00","vendor":"Behringer","type":"PA and Recording","tags":["Brand_Behringer","reverbsync-offers:off","reverbsync-shipping-profile:free","Type_Power Amplifiers"],"price":14999,"price_min":14999,"price_max":14999,"available":false,"price_varies":false,"compare_at_price":22499,"compare_at_price_min":22499,"compare_at_price_max":22499,"compare_at_price_varies":false,"variants":[{"id":45056251662,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"748252142740","requires_shipping":true,"taxable":true,"featured_image":{"id":26899023310,"product_id":11355595278,"position":1,"created_at":"2017-09-06T10:49:04-04:00","updated_at":"2017-09-06T10:49:04-04:00","alt":"Behringer NU1000 Power Amp","width":1080,"height":1080,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NU1000_PowerAmp.jpg?v=1504709344","variant_ids":[45056251662]},"available":false,"name":"Behringer NU1000 Ultra-Lightweight, High-Densit","public_title":null,"options":["Default Title"],"price":14999,"weight":0,"compare_at_price":22499,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"748252142740"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NU1000_PowerAmp.jpg?v=1504709344","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NU1000_PowerAmp_2.jpg?v=1505252361","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NU1000_PowerAmp_3.jpg?v=1505312316"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_NU1000_PowerAmp.jpg?v=1504709344","options":["Title"],"content":"\u003cstrong\u003eBehringer NU1000 iNuke Ultra-Lightweight, High-Density 1000-Watt Power Amplifier \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eLike all the iNUKE Series power amplifiers, the iNUKE NU1000 packs massive amounts of output power into an exceptionally lightweight, rackmountable package. Behringer's revolutionary high-density Class-D technology combined with ultra-efficient switch-mode power supplies ensures these featherlight powerhouses will drive your rig effortlessly for many years to come.\u003cbr\u003e\u003cbr\u003eSuperb transient response\u003cbr\u003eBehringer spent years fine-tuning the high-density Class-D technology that gives the iNUKE Series its oomph. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of the circuitry, these amps react instantly to even the most demanding electronic bass impulses.\u003cbr\u003e\u003cbr\u003eWhen this amplifier technology is combined with our state-of-the-art switching-mode power supplies, these amplifiers provide tremendous punch. And because they are so much more efficient than conventional designs, they run cooler and don't require the massive heat sinks and heavy toroid transformers typically associated with their conventional counterparts.\u003cbr\u003e\u003cbr\u003eSublimely simple operation\u003cbr\u003eThe front panel controls and indicators provide your system's vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as clip LEDs to indicate when the signal is distorted and you need to reduce the input signal.\u003cbr\u003e\u003cbr\u003eThe rear panel is just as elegant, with combo XLR and 1\/4\" TRS input connectors making the iNUKE compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers. The rear panel is also where you'll find the switches that enable iNUKE amps to work in either dual mono, stereo or mono bridge mode. A built-in CROSSOVER switch enables the amp to operate in biamp mode, sending low frequency content to passive subwoofers, while the high frequency output is channeled to full-range loudspeakers (CH1\u0026gt;100 Hz \/ CH2\u0026lt;100 Hz or FULLRANGE). Flick the LIMITER ON\/OFF switch to activate the built-in overload protection, or turn it off if you're feeling lucky.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003cbr\u003e• Delivers 2 x 500 Watts into 2 Ohms; 2 x 300 Watts into 4 Ohms; 1000 Watts into 4 Ohms (bridge mode) and weighs less than 7 lbs \/ 3.3 kg\u003cbr\u003e• Ultimate reliability through revolutionary cool-running High-Density Class-D technology with \"near-zero\" thermal buildup\u003cbr\u003e• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption\u003cbr\u003e• \"Zero-Attack\" limiters offer maximum output level with reliable overload protection\u003cbr\u003e• Built-in Subwoofer\/Satellite crossover for perfect subwoofer operation\u003cbr\u003e• Detented and illuminated gain controls for precise level setting\u003cbr\u003e• Precise 4-segment Signal and Limit LEDs to monitor performance\u003cbr\u003e• XLR and 1\/4'' TRS combination input connectors for compatibility with any source\u003cbr\u003e• Professional twist-lock speaker connectors for ultimate reliability\u003cbr\u003e• Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show\u003cbr\u003e• \"Back-to-front\" ventilation system prevents thermal buildup for reliable operation\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e"}

{"id":11355593550,"title":"Behringer KM750 - 750 Watt Power Amp","handle":"behringer-km750-750-watt-power-amp","description":"\u003cstrong\u003eBehringer KM750 Professional 750W Stereo Power Amplifier\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe KM750 from Behringer is a stereo power amplifier which is capable of delivering 200W into 8 Ohm loads, or 400W into 4 Ohm loads. In bridged-mono mode, it can reach an output power of 750W. The amplifier features Behringer's ATR technology, which is designed to preserve a quick, tight transient response even at high volume levels. \u003cbr\u003e\u003cbr\u003eIts front panel controls are simple: two positive-detent gain knobs allow you to control the level of each independent channel. To keep you abreast of the amplifier's various goings-on, LEDs have been provided for monitoring of power, signal, and overloads. \u003cbr\u003e\u003cbr\u003eTurn your attention to the back panel and you'll notice two balanced XLR inputs, as well as two unbalanced 1\/4\" TRS jacks and two unbalanced RCA inputs, making this power amplifier compatible with a wide array of audio sources. The amplifier provides two locking speaker connections with touch-proof binding posts, thus supporting the wiring systems of most professional speakers. You'll also see the selector which switches between mono, stereo, or bridged mono mode, as well as a ground\/lift switch and a selector to turn on the built-in limiter.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003cbr\u003e• 2 x 400W into 4 Ohms\u003cbr\u003e• 2 x 200W into 8 Ohms \u003cbr\u003e• 750 Watts into 8 Ohms (bridged mono mode)\u003cbr\u003e• ATR (Accelerated Transient Response) technology for punch and clarity\u003cbr\u003e• Switchable limiters offer maximum output level with reliable overload protection\u003cbr\u003e• Power, signal and clip LEDs to monitor performance\u003cbr\u003e• XLR, 1\/4\" TRS, and RCA input connectors \u003cbr\u003e• Professional speaker connectors and touch-proof binding posts \u003cbr\u003e• Independent DC and short circuit protection on each channel automatically protects amplifier and speakers\u003cbr\u003e• High-current toroidal transformer for high transient response \u003cbr\u003e• Active cooling on heatsink\u003cbr\u003e• Impact-resistant, all-steel 2U rackmount chassis\u003cbr\u003e","published_at":"2017-09-06T10:48:22-04:00","created_at":"2017-09-06T10:48:22-04:00","vendor":"Behringer","type":"PA and Recording","tags":["Brand_Behringer","reverbsync-offers:off","reverbsync-shipping-profile:free","Type_Power Amplifiers"],"price":14999,"price_min":14999,"price_max":14999,"available":false,"price_varies":false,"compare_at_price":22499,"compare_at_price_min":22499,"compare_at_price_max":22499,"compare_at_price_varies":false,"variants":[{"id":45056244494,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"748252164544","requires_shipping":true,"taxable":true,"featured_image":{"id":26899012686,"product_id":11355593550,"position":1,"created_at":"2017-09-06T10:48:22-04:00","updated_at":"2017-09-06T10:48:22-04:00","alt":"Behringer KM750 750 Watts","width":864,"height":864,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_KM750_PowerAmp.jpg?v=1504709302","variant_ids":[45056244494]},"available":false,"name":"Behringer KM750 - 750 Watt Power Amp","public_title":null,"options":["Default Title"],"price":14999,"weight":0,"compare_at_price":22499,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"748252164544"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_KM750_PowerAmp.jpg?v=1504709302","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_KM750_PowerAmp_2.jpg?v=1505252342","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_KM750_PowerAmp_3.jpg?v=1505312296","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_KM750_PowerAmp_4.jpg?v=1505327428"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_KM750_PowerAmp.jpg?v=1504709302","options":["Title"],"content":"\u003cstrong\u003eBehringer KM750 Professional 750W Stereo Power Amplifier\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe KM750 from Behringer is a stereo power amplifier which is capable of delivering 200W into 8 Ohm loads, or 400W into 4 Ohm loads. In bridged-mono mode, it can reach an output power of 750W. The amplifier features Behringer's ATR technology, which is designed to preserve a quick, tight transient response even at high volume levels. \u003cbr\u003e\u003cbr\u003eIts front panel controls are simple: two positive-detent gain knobs allow you to control the level of each independent channel. To keep you abreast of the amplifier's various goings-on, LEDs have been provided for monitoring of power, signal, and overloads. \u003cbr\u003e\u003cbr\u003eTurn your attention to the back panel and you'll notice two balanced XLR inputs, as well as two unbalanced 1\/4\" TRS jacks and two unbalanced RCA inputs, making this power amplifier compatible with a wide array of audio sources. The amplifier provides two locking speaker connections with touch-proof binding posts, thus supporting the wiring systems of most professional speakers. You'll also see the selector which switches between mono, stereo, or bridged mono mode, as well as a ground\/lift switch and a selector to turn on the built-in limiter.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003cbr\u003e• 2 x 400W into 4 Ohms\u003cbr\u003e• 2 x 200W into 8 Ohms \u003cbr\u003e• 750 Watts into 8 Ohms (bridged mono mode)\u003cbr\u003e• ATR (Accelerated Transient Response) technology for punch and clarity\u003cbr\u003e• Switchable limiters offer maximum output level with reliable overload protection\u003cbr\u003e• Power, signal and clip LEDs to monitor performance\u003cbr\u003e• XLR, 1\/4\" TRS, and RCA input connectors \u003cbr\u003e• Professional speaker connectors and touch-proof binding posts \u003cbr\u003e• Independent DC and short circuit protection on each channel automatically protects amplifier and speakers\u003cbr\u003e• High-current toroidal transformer for high transient response \u003cbr\u003e• Active cooling on heatsink\u003cbr\u003e• Impact-resistant, all-steel 2U rackmount chassis\u003cbr\u003e"}

{"id":11355593294,"title":"Behringer KM1700 Professional 1700W Stereo Power Amplifier","handle":"behringer-km1700-professional-1700w-stereo-power-amplifier","description":"\u003cstrong\u003eBehringer KM1700 Professional 1700W Stereo Power Amplifier\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe KM1700 from Behringer is a stereo power amplifier which is capable of delivering 500W into 8 Ohm loads, or 800W into 4 Ohm loads. In bridged-mono mode, it can reach an output power of 1700W. The amplifier features Behringer's ATR technology, which is designed to preserve a quick, tight transient response even at high volume levels. \u003cbr\u003e\u003cbr\u003eIts front panel controls are simple: two positive-detent gain knobs allow you to control the level of each independent channel. To keep you abreast of the amplifier's various goings-on, LEDs have been provided for monitoring of power, signal, and overloads. \u003cbr\u003e\u003cbr\u003eTurn your attention to the back panel and you'll notice two balanced XLR inputs, as well as two unbalanced 1\/4\" TRS jacks. The amplifier provides two locking speaker connections with touch-proof binding posts, thus supporting the wiring systems of most professional speakers. You'll also see the selector which switches between mono, stereo, or bridged mono mode, as well as a ground\/lift switch and a selector to turn on the built-in limiter.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003cbr\u003e• 2 x 800W into 4 Ohms\u003cbr\u003e• 2 x 500W into 8 Ohms \u003cbr\u003e• 1700 Watts into 8 Ohms (bridged mono mode)\u003cbr\u003e• ATR (Accelerated Transient Response) technology for punch and clarity\u003cbr\u003e• Switchable limiters offer maximum output level with reliable overload protection\u003cbr\u003e• Power, signal and clip LEDs to monitor performance\u003cbr\u003e• XLR and 1\/4\" TRS input connectors \u003cbr\u003e• Professional speaker connectors and touch-proof binding posts \u003cbr\u003e• Independent DC and short circuit protection on each channel automatically protects amplifier and speakers\u003cbr\u003e• High-current toroidal transformer for high transient response \u003cbr\u003e• Front to back ventilation \u003cbr\u003e• Impact-resistant, all-steel 2U rackmount chassis\u003cbr\u003e","published_at":"2017-09-06T10:48:19-04:00","created_at":"2017-09-06T10:48:19-04:00","vendor":"Behringer","type":"PA and Recording","tags":["Brand_Behringer","reverbsync-offers:off","reverbsync-shipping-profile:free","Type_Power Amplifiers"],"price":19999,"price_min":19999,"price_max":19999,"available":true,"price_varies":false,"compare_at_price":29999,"compare_at_price_min":29999,"compare_at_price_max":29999,"compare_at_price_varies":false,"variants":[{"id":45056243214,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"748252164643","requires_shipping":true,"taxable":true,"featured_image":{"id":26899012174,"product_id":11355593294,"position":1,"created_at":"2017-09-06T10:48:19-04:00","updated_at":"2017-09-06T10:48:19-04:00","alt":"Behringer KM1700 - 1700 Watts","width":864,"height":864,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_KM1700_PowerAmp.jpg?v=1504709299","variant_ids":[45056243214]},"available":true,"name":"Behringer KM1700 Professional 1700W Stereo Power Amplifier","public_title":null,"options":["Default Title"],"price":19999,"weight":0,"compare_at_price":29999,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"748252164643"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_KM1700_PowerAmp.jpg?v=1504709299","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_KM1700_PowerAmp_2.jpg?v=1505252341","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_KM1700_PowerAmp_3.jpg?v=1505312295","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_KM1700_PowerAmp_4.jpg?v=1505327427"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_KM1700_PowerAmp.jpg?v=1504709299","options":["Title"],"content":"\u003cstrong\u003eBehringer KM1700 Professional 1700W Stereo Power Amplifier\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe KM1700 from Behringer is a stereo power amplifier which is capable of delivering 500W into 8 Ohm loads, or 800W into 4 Ohm loads. In bridged-mono mode, it can reach an output power of 1700W. The amplifier features Behringer's ATR technology, which is designed to preserve a quick, tight transient response even at high volume levels. \u003cbr\u003e\u003cbr\u003eIts front panel controls are simple: two positive-detent gain knobs allow you to control the level of each independent channel. To keep you abreast of the amplifier's various goings-on, LEDs have been provided for monitoring of power, signal, and overloads. \u003cbr\u003e\u003cbr\u003eTurn your attention to the back panel and you'll notice two balanced XLR inputs, as well as two unbalanced 1\/4\" TRS jacks. The amplifier provides two locking speaker connections with touch-proof binding posts, thus supporting the wiring systems of most professional speakers. You'll also see the selector which switches between mono, stereo, or bridged mono mode, as well as a ground\/lift switch and a selector to turn on the built-in limiter.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003cbr\u003e• 2 x 800W into 4 Ohms\u003cbr\u003e• 2 x 500W into 8 Ohms \u003cbr\u003e• 1700 Watts into 8 Ohms (bridged mono mode)\u003cbr\u003e• ATR (Accelerated Transient Response) technology for punch and clarity\u003cbr\u003e• Switchable limiters offer maximum output level with reliable overload protection\u003cbr\u003e• Power, signal and clip LEDs to monitor performance\u003cbr\u003e• XLR and 1\/4\" TRS input connectors \u003cbr\u003e• Professional speaker connectors and touch-proof binding posts \u003cbr\u003e• Independent DC and short circuit protection on each channel automatically protects amplifier and speakers\u003cbr\u003e• High-current toroidal transformer for high transient response \u003cbr\u003e• Front to back ventilation \u003cbr\u003e• Impact-resistant, all-steel 2U rackmount chassis\u003cbr\u003e"}

{"id":11355590798,"title":"Behringer EP4000 Professional 4,000-Watt Stereo Power Amp","handle":"behringer-ep4000-professional-4-000-watt-stereo-power-amp","description":"\u003cstrong\u003eBEHRINGER EUROPOWER EP4000\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe EP2000 and EP4000 represent everything musicians love about our popular EP1500\/EP2500 - excellent sound quality, road-worthy toughness and reliability, low-noise operation and incredible power. With 2,000 and 4,000-Watts respectively, the EP2000 and EP4000 amplifiers are perfect for medium-sized club gigs, mobile PA systems, church services or public spaces.\u003cbr\u003e\u003cbr\u003eEverything You Need, Nothing You Don't\u003cbr\u003e\u003cbr\u003eThe über-simple front panel controls of these amps give you all of your sound's vital signs at a glance. After flipping the MAIN switch, the POWER LED will light when the amp is ready for action. Both channels have independent gain dials as well as clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also SIGNAL LEDs that light up when a signal is present at the input.\u003cbr\u003e\u003cbr\u003ePanel Discussion\u003cbr\u003e\u003cbr\u003eA panel of switches found on the back panel offers an array of cool options to apply to both channels of the EP2000 and EP4000. The Clip Limiter lets you get even more out of the amplifier without overdriving either it or your speaker system. Built-in circuitry automatically senses when the EP2000 or EP4000 is being overdriven into \"clipping\" and then momentarily reduces the input level to avoid clipping distortion. This all happens in a few thousandths of a second, so it's an inaudible way of avoiding audible clipping distortion. Of course, you can turn the Limiter off if you're feeling lucky.\u003cbr\u003e\u003cbr\u003eUltra-low frequency sounds (infrasonics) are caused by rickety stage vibrations, mic thumps and wind noise. While technically inaudible, they can cause a huge drain on amp power, potential damage to your speakers and a sludgy sound in the audible bass ranges. Both EP models feature a defeatable Low Cut Filter that chops off unwanted frequencies below 50Hz or 30Hz (depending on your PA system's capabilities).\u003cbr\u003e\u003cbr\u003eThe same panel contains the switches that allow you to put these amps to work in either stereo or bridge (mono) mode. Both the EP2000 and EP4000 can be linked to additional power amps by switching into parallel mode.\u003cbr\u003e\u003cbr\u003eThese Amps Have Guts\u003cbr\u003e\u003cbr\u003eThere's plenty of awesome features on the outside of the EP2000 and EP4000, but there's also a team of cool components on the inside helping it work its magic. They come loaded with famously reliable Toshiba\/Fairchild power transistors as well as a high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects the amplifier and speakers from any show-stopping meltdowns. There's no need for fuses, giving you one fewer potential mid-gig headache.\u003cbr\u003e\u003cbr\u003eThe EP2000 and EP4000 have both XLR and 1\/4\" TRS inputs. Even the outputs are totally flexible, consisting of Speakon-compatible outputs and five-way binding posts. Whether you're dealing with bare wire or boutique audiophile cabling, the EP2000 and EP4000 are right at home. The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps these amps working in the mild temperatures they love, even through periods of extended use. Finally, an impact-resistant, all-steel 2U rackmount chassis helps these workhorses stand up to all the rigors of the road.\u003cbr\u003e\u003cbr\u003eAccelerated Transient Response Delivers the Knock-Out Punch\u003cbr\u003e\u003cbr\u003eIt takes huge pulses of energy (current and voltage) to propel a woofer cone out fast enough to match a bass beat. That's called Transient Response and it's the holy grail of amp designers. By carefully selecting transistors with extremely highslew rates and optimizing other proprietary parts of our circuitry, our amps are able to react instantly to even the most demanding electronic bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.\u003cbr\u003e\u003cbr\u003eThe Legend Powers On\u003cbr\u003e\u003cbr\u003eIf you read the reviews of the EP2000 and EP4000's older brothers, the EP1500 and EP2500, and it's clear that those amps are renowned not only for their performance and durability, but also their astoundingly low price tags. The EP2000 and EP4000 extend that legacy to the next level. Why shell out for a \"Brand-X\" amp when you can get a BEHRINGER EUROPOWER amp and have money left over for other gear?\u003cbr\u003e\u003cbr\u003eEverything You Need, Nothing You Don't\u003cbr\u003eThe über-simple front panel controls of these amps give you all of your sound's vital signs at a glance. After flipping the MAIN switch, the POWER LED will light when the amp is ready for action. Both channels have independent gain dials as well as clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also SIGNAL LEDs that light up when a signal is present at the input.\u003cbr\u003e\u003cbr\u003ePanel Discussion\u003cbr\u003eA panel of switches found on the back panel offers an array of cool options to apply to both channels of the EP2000 and EP4000. The Clip Limiter lets you get even more out of the amplifier without overdriving either it or your speaker system. Built-in circuitry automatically senses when the EP2000 or EP4000 is being overdriven into \"clipping\" and then momentarily reduces the input level to avoid clipping distortion. This all happens in a few thousandths of a second, so it's an inaudible way of avoiding audible clipping distortion. Of course, you can turn the Limiter off if you're feeling lucky.\u003cbr\u003e\u003cbr\u003eUltra-low frequency sounds (infrasonics) are caused by rickety stage vibrations, mic thumps and wind noise. While technically inaudible, they can cause a huge drain on amp power, potential damage to your speakers and a sludgy sound in the audible bass ranges. Both EP models feature a defeatable Low Cut Filter that chops off unwanted frequencies below 50Hz or 30Hz (depending on your PA system's capabilities).\u003cbr\u003e\u003cbr\u003eThe same panel contains the switches that allow you to put these amps to work in either stereo or bridge (mono) mode. Both the EP2000 and EP4000 can be linked to additional power amps by switching into parallel mode.\u003cbr\u003e\u003cbr\u003eThese Amps Have Guts\u003cbr\u003eThere's plenty of awesome features on the outside of the EP2000 and EP4000, but there's also a team of cool components on the inside helping it work its magic. They come loaded with famously reliable Toshiba\/Fairchild power transistors as well as a high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects the amplifier and speakers from any show-stopping meltdowns. There's no need for fuses, giving you one fewer potential mid-gig headache.\u003cbr\u003e\u003cbr\u003eThe EP2000 and EP4000 have both XLR and 1\/4\" TRS inputs. Even the outputs are totally flexible, consisting of Speakon-compatible outputs and five-way binding posts. Whether you're dealing with bare wire or boutique audiophile cabling, the EP2000 and EP4000 are right at home.\u003cbr\u003e\u003cbr\u003eThe exhaust fan, visible on the back panel, is the final stage of an internal front-to-back cooling system that keeps these amps working in the mild temperatures they love, even through periods of extended use. Finally, an impact-resistant, all-steel 2U rackmount chassis helps these workhorses stand up to all the rigors of the road.\u003cbr\u003e\u003cbr\u003eAccelerated Transient Response Delivers the Knock-Out Punch\u003cbr\u003eIt takes huge pulses of energy (current and voltage) to propel a woofer cone out fast enough to match a bass beat. That's called Transient Response and it's the holy grail of amp designers. By carefully selecting transistors with extremely highslew rates and optimizing other proprietary parts of our circuitry, our amps are able to react instantly to even the most demanding electronic bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.\u003cbr\u003e\u003cbr\u003eThe Legend Powers On\u003cbr\u003eIf you read the reviews of the EP2000 and EP4000's older brothers, the EP1500 and EP2500, and it's clear that those amps are renow","published_at":"2017-09-06T10:47:18-04:00","created_at":"2017-09-06T10:47:18-04:00","vendor":"Behringer","type":"PA and Recording","tags":["Brand_Behringer","reverbsync-offers:off","reverbsync-shipping-profile:free","Type_Power Amplifiers"],"price":32999,"price_min":32999,"price_max":32999,"available":true,"price_varies":false,"compare_at_price":49499,"compare_at_price_min":49499,"compare_at_price_max":49499,"compare_at_price_varies":false,"variants":[{"id":45056226574,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"689076150514","requires_shipping":true,"taxable":true,"featured_image":{"id":26898998030,"product_id":11355590798,"position":1,"created_at":"2017-09-06T10:47:18-04:00","updated_at":"2017-09-06T10:47:18-04:00","alt":"Behringer EP4000 Power Amp","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_EP4000.jpg?v=1504709238","variant_ids":[45056226574]},"available":true,"name":"Behringer EP4000 Professional 4,000-Watt Stereo Power Amp","public_title":null,"options":["Default Title"],"price":32999,"weight":0,"compare_at_price":49499,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"689076150514"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_EP4000.jpg?v=1504709238","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_EP4000_2.jpg?v=1505252314","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_EP4000_3.jpg?v=1505312267","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_EP4000_4.jpg?v=1505327404","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_EP4000_5.jpg?v=1505345434"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_EP4000.jpg?v=1504709238","options":["Title"],"content":"\u003cstrong\u003eBEHRINGER EUROPOWER EP4000\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe EP2000 and EP4000 represent everything musicians love about our popular EP1500\/EP2500 - excellent sound quality, road-worthy toughness and reliability, low-noise operation and incredible power. With 2,000 and 4,000-Watts respectively, the EP2000 and EP4000 amplifiers are perfect for medium-sized club gigs, mobile PA systems, church services or public spaces.\u003cbr\u003e\u003cbr\u003eEverything You Need, Nothing You Don't\u003cbr\u003e\u003cbr\u003eThe über-simple front panel controls of these amps give you all of your sound's vital signs at a glance. After flipping the MAIN switch, the POWER LED will light when the amp is ready for action. Both channels have independent gain dials as well as clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also SIGNAL LEDs that light up when a signal is present at the input.\u003cbr\u003e\u003cbr\u003ePanel Discussion\u003cbr\u003e\u003cbr\u003eA panel of switches found on the back panel offers an array of cool options to apply to both channels of the EP2000 and EP4000. The Clip Limiter lets you get even more out of the amplifier without overdriving either it or your speaker system. Built-in circuitry automatically senses when the EP2000 or EP4000 is being overdriven into \"clipping\" and then momentarily reduces the input level to avoid clipping distortion. This all happens in a few thousandths of a second, so it's an inaudible way of avoiding audible clipping distortion. Of course, you can turn the Limiter off if you're feeling lucky.\u003cbr\u003e\u003cbr\u003eUltra-low frequency sounds (infrasonics) are caused by rickety stage vibrations, mic thumps and wind noise. While technically inaudible, they can cause a huge drain on amp power, potential damage to your speakers and a sludgy sound in the audible bass ranges. Both EP models feature a defeatable Low Cut Filter that chops off unwanted frequencies below 50Hz or 30Hz (depending on your PA system's capabilities).\u003cbr\u003e\u003cbr\u003eThe same panel contains the switches that allow you to put these amps to work in either stereo or bridge (mono) mode. Both the EP2000 and EP4000 can be linked to additional power amps by switching into parallel mode.\u003cbr\u003e\u003cbr\u003eThese Amps Have Guts\u003cbr\u003e\u003cbr\u003eThere's plenty of awesome features on the outside of the EP2000 and EP4000, but there's also a team of cool components on the inside helping it work its magic. They come loaded with famously reliable Toshiba\/Fairchild power transistors as well as a high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects the amplifier and speakers from any show-stopping meltdowns. There's no need for fuses, giving you one fewer potential mid-gig headache.\u003cbr\u003e\u003cbr\u003eThe EP2000 and EP4000 have both XLR and 1\/4\" TRS inputs. Even the outputs are totally flexible, consisting of Speakon-compatible outputs and five-way binding posts. Whether you're dealing with bare wire or boutique audiophile cabling, the EP2000 and EP4000 are right at home. The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps these amps working in the mild temperatures they love, even through periods of extended use. Finally, an impact-resistant, all-steel 2U rackmount chassis helps these workhorses stand up to all the rigors of the road.\u003cbr\u003e\u003cbr\u003eAccelerated Transient Response Delivers the Knock-Out Punch\u003cbr\u003e\u003cbr\u003eIt takes huge pulses of energy (current and voltage) to propel a woofer cone out fast enough to match a bass beat. That's called Transient Response and it's the holy grail of amp designers. By carefully selecting transistors with extremely highslew rates and optimizing other proprietary parts of our circuitry, our amps are able to react instantly to even the most demanding electronic bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.\u003cbr\u003e\u003cbr\u003eThe Legend Powers On\u003cbr\u003e\u003cbr\u003eIf you read the reviews of the EP2000 and EP4000's older brothers, the EP1500 and EP2500, and it's clear that those amps are renowned not only for their performance and durability, but also their astoundingly low price tags. The EP2000 and EP4000 extend that legacy to the next level. Why shell out for a \"Brand-X\" amp when you can get a BEHRINGER EUROPOWER amp and have money left over for other gear?\u003cbr\u003e\u003cbr\u003eEverything You Need, Nothing You Don't\u003cbr\u003eThe über-simple front panel controls of these amps give you all of your sound's vital signs at a glance. After flipping the MAIN switch, the POWER LED will light when the amp is ready for action. Both channels have independent gain dials as well as clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also SIGNAL LEDs that light up when a signal is present at the input.\u003cbr\u003e\u003cbr\u003ePanel Discussion\u003cbr\u003eA panel of switches found on the back panel offers an array of cool options to apply to both channels of the EP2000 and EP4000. The Clip Limiter lets you get even more out of the amplifier without overdriving either it or your speaker system. Built-in circuitry automatically senses when the EP2000 or EP4000 is being overdriven into \"clipping\" and then momentarily reduces the input level to avoid clipping distortion. This all happens in a few thousandths of a second, so it's an inaudible way of avoiding audible clipping distortion. Of course, you can turn the Limiter off if you're feeling lucky.\u003cbr\u003e\u003cbr\u003eUltra-low frequency sounds (infrasonics) are caused by rickety stage vibrations, mic thumps and wind noise. While technically inaudible, they can cause a huge drain on amp power, potential damage to your speakers and a sludgy sound in the audible bass ranges. Both EP models feature a defeatable Low Cut Filter that chops off unwanted frequencies below 50Hz or 30Hz (depending on your PA system's capabilities).\u003cbr\u003e\u003cbr\u003eThe same panel contains the switches that allow you to put these amps to work in either stereo or bridge (mono) mode. Both the EP2000 and EP4000 can be linked to additional power amps by switching into parallel mode.\u003cbr\u003e\u003cbr\u003eThese Amps Have Guts\u003cbr\u003eThere's plenty of awesome features on the outside of the EP2000 and EP4000, but there's also a team of cool components on the inside helping it work its magic. They come loaded with famously reliable Toshiba\/Fairchild power transistors as well as a high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects the amplifier and speakers from any show-stopping meltdowns. There's no need for fuses, giving you one fewer potential mid-gig headache.\u003cbr\u003e\u003cbr\u003eThe EP2000 and EP4000 have both XLR and 1\/4\" TRS inputs. Even the outputs are totally flexible, consisting of Speakon-compatible outputs and five-way binding posts. Whether you're dealing with bare wire or boutique audiophile cabling, the EP2000 and EP4000 are right at home.\u003cbr\u003e\u003cbr\u003eThe exhaust fan, visible on the back panel, is the final stage of an internal front-to-back cooling system that keeps these amps working in the mild temperatures they love, even through periods of extended use. Finally, an impact-resistant, all-steel 2U rackmount chassis helps these workhorses stand up to all the rigors of the road.\u003cbr\u003e\u003cbr\u003eAccelerated Transient Response Delivers the Knock-Out Punch\u003cbr\u003eIt takes huge pulses of energy (current and voltage) to propel a woofer cone out fast enough to match a bass beat. That's called Transient Response and it's the holy grail of amp designers. By carefully selecting transistors with extremely highslew rates and optimizing other proprietary parts of our circuitry, our amps are able to react instantly to even the most demanding electronic bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.\u003cbr\u003e\u003cbr\u003eThe Legend Powers On\u003cbr\u003eIf you read the reviews of the EP2000 and EP4000's older brothers, the EP1500 and EP2500, and it's clear that those amps are renow"}

{"id":11355590734,"title":"Behringer EP2000 Professional 2,000-Watt Stereo Power Amplifier","handle":"behringer-ep2000-professional-2-000-watt-stereo-power-amplifier","description":"\u003cstrong\u003eBehringer EP2000 Professional 2,000-Watt Stereo Power Amplifier\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe rear panel of every EUROPOWER EP2000 sports an array of options to help you get the most out of your amp. The built-in Clip Limiter automatically senses when the amplifier is being driven into “clipping” and momentarily reduces the input level to avoid distortion. It takes huge pulses of energy (current and voltage) to propel a woofer cone fast enough to match a bass beat. That’s called ATR or Accelerated Transient Response and it’s the holy grail of amp designers. There are lots of awesome features on the outside of the EP2000, but this amplifier’s beauty goes much more than just skin-deep. Inside you’ll find industry-leading components, such as world-class Toshiba\/Fairchild power transistors, and a custom-designed, high-current toroidal transformer for ultra-high transient response and further reliability.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e• Amazing 2,000-Watts of output power (2 x 1,000 Watts @ 2 Ohms; 2 x 750 Watts @ 4 Ohms; 2,000 Watts @ 4 Ohms in Bridge mode)\u003cbr\u003e• The EP2000 is the perfect amplifier for medium-sized club gigs, mobile PA systems, church services or public spaces.\u003cbr\u003e• The Power LED will light when the amp is ready for action\u003cbr\u003e• 2 channels feature dedicated Gain controls and Signal LEDs\u003cbr\u003e• The woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.\u003cbr\u003e• The EP4000 features a defeatable Low Cut Filter that eliminates frequencies below either 50 or 30 Hz\u003cbr\u003e• The rear panel also contains the Stereo or Bridge (mono) mode switches.\u003cbr\u003eWe confidently back it up with a generous 3-Year Warranty program.\u003cbr\u003e","published_at":"2017-09-06T10:47:15-04:00","created_at":"2017-09-06T10:47:15-04:00","vendor":"Behringer","type":"PA and Recording","tags":["Brand_Behringer","reverbsync-offers:off","reverbsync-shipping-profile:free","Type_Power Amplifiers"],"price":24999,"price_min":24999,"price_max":24999,"available":false,"price_varies":false,"compare_at_price":37499,"compare_at_price_min":37499,"compare_at_price_max":37499,"compare_at_price_varies":false,"variants":[{"id":45056226510,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"689076151511","requires_shipping":true,"taxable":true,"featured_image":{"id":26898997326,"product_id":11355590734,"position":1,"created_at":"2017-09-06T10:47:15-04:00","updated_at":"2017-09-06T10:47:15-04:00","alt":"Behringer EP2000 Power Amp","width":1152,"height":1152,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_EP2000.jpg?v=1504709235","variant_ids":[45056226510]},"available":false,"name":"Behringer EP2000 Professional 2,000-Watt Stereo Power Amplifier","public_title":null,"options":["Default Title"],"price":24999,"weight":0,"compare_at_price":37499,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"689076151511"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_EP2000.jpg?v=1504709235","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_EP2000_2.jpg?v=1505252312","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_EP2000_3.jpg?v=1505312266","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_EP2000_4.jpg?v=1505327403","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_EP2000_5.jpg?v=1505345433"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Behringer_EP2000.jpg?v=1504709235","options":["Title"],"content":"\u003cstrong\u003eBehringer EP2000 Professional 2,000-Watt Stereo Power Amplifier\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe rear panel of every EUROPOWER EP2000 sports an array of options to help you get the most out of your amp. The built-in Clip Limiter automatically senses when the amplifier is being driven into “clipping” and momentarily reduces the input level to avoid distortion. It takes huge pulses of energy (current and voltage) to propel a woofer cone fast enough to match a bass beat. That’s called ATR or Accelerated Transient Response and it’s the holy grail of amp designers. There are lots of awesome features on the outside of the EP2000, but this amplifier’s beauty goes much more than just skin-deep. Inside you’ll find industry-leading components, such as world-class Toshiba\/Fairchild power transistors, and a custom-designed, high-current toroidal transformer for ultra-high transient response and further reliability.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e• Amazing 2,000-Watts of output power (2 x 1,000 Watts @ 2 Ohms; 2 x 750 Watts @ 4 Ohms; 2,000 Watts @ 4 Ohms in Bridge mode)\u003cbr\u003e• The EP2000 is the perfect amplifier for medium-sized club gigs, mobile PA systems, church services or public spaces.\u003cbr\u003e• The Power LED will light when the amp is ready for action\u003cbr\u003e• 2 channels feature dedicated Gain controls and Signal LEDs\u003cbr\u003e• The woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.\u003cbr\u003e• The EP4000 features a defeatable Low Cut Filter that eliminates frequencies below either 50 or 30 Hz\u003cbr\u003e• The rear panel also contains the Stereo or Bridge (mono) mode switches.\u003cbr\u003eWe confidently back it up with a generous 3-Year Warranty program.\u003cbr\u003e"}