Darkglass Electronics

Sort by:
{"id":2021623332930,"title":"Darkglass Microtubes B7K Ultra V2 Bass Preamp Pedal","handle":"darkglass-microtubes-b7k-ultra-v2-bass-preamp-pedal","description":"Microtubes B7K Ultra v2 - Bass Preamp\u003cbr\u003e\u003cbr\u003eThe upgraded Microtubes B7K Ultra features all the versatility and sonic possibilities of the first version plus: (1) Single user loadable cabinet simulation impulse response. (2) Micro-USB B port to connect to PC\/Mac to load a different Virtual Cabinet through the Darkglass Suite. (3) 3.5mm (1\/8\") headphone output with cabinet simulation. (4) Balanced XLR output with switchable cabinet simulation.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eMaster:\u003c\/strong\u003e Whereas the Level Knob controls the output of the overdrive section the Master volume adjusts the overall volume of the unit. Ideal for fine tuning the output on clean mode. It also serves as a DI level control.\u003cbr\u003e• \u003cstrong\u003eBlend:\u003c\/strong\u003e Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.\u003cbr\u003e• \u003cstrong\u003eLevel:\u003c\/strong\u003e Sets the volume of the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eDrive:\u003c\/strong\u003e Sets the amount of saturation in the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eAttack Switch:\u003c\/strong\u003e Sets the amount of treble content to saturate: The \"Boost\" setting emphasizes the treble content extra clarity and presence. The \"Flat\" position leaves this register untouched while the \"Cut\" position will reduce the amount of high frequencies being saturated.\u003cbr\u003e• \u003cstrong\u003eGrunt Switch:\u003c\/strong\u003e Sets the amount of low frequency content to saturate by selecting between three different bass boost levels before the clipping stage.\u003cbr\u003e• \u003cstrong\u003eBass:\u003c\/strong\u003e +-12dB at 100Hz\u003cbr\u003e• \u003cstrong\u003eLo Mids:\u003c\/strong\u003e +-12dB switchable 250Hz, 500Hz and 1kHz\u003cbr\u003e• \u003cstrong\u003eHi Mids:\u003c\/strong\u003e +-12dB switchable 750Hz, 1.5KHz and 3kHz\u003cbr\u003e• \u003cstrong\u003eTreble:\u003c\/strong\u003e +-12dB at 5kHz\u003cbr\u003e• \u003cstrong\u003eDirect Ouput:\u003c\/strong\u003e Balanced XLR output for connecting the pedal to a microphone preamp, PA system etc.\u003cbr\u003e• \u003cstrong\u003eGround lift:\u003c\/strong\u003e Disconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the 1\/4\" output.\u003cbr\u003e• \u003cstrong\u003eCab Sim:\u003c\/strong\u003e Toggle the cabinet simulation on\/off on the Direct Output. This switch completely bypasses all digital circuits and allows you to get a zero latency signal when needed.\u003cbr\u003e• \u003cstrong\u003eHeadphones:\u003c\/strong\u003e B7K Ultra has an internal stereo headphone amplifier capable of driving a minimum load of 16 ohms from the 3.5mm (1\/8”) stereo jack. Use the Master volume control to adjust the level. When the pedal is on bypass the master volume does not affect the headphone volume. In this case the total volume is adjustable in Darkglass Suite. With sensitive headphones the bypass volume can be very loud if not adjusted\u003cbr\u003e• \u003cstrong\u003eUSB:\u003c\/strong\u003e A Micro USB B connector allows you to connect the pedal to PC\/Mac to load cabinet simulation impulse responses to the pedal and control various other settings.\u003cbr\u003e• \u003cstrong\u003eDimensions:\u003c\/strong\u003e 4,92\" x 3,77\" x 2,24\"\u003cbr\u003e• \u003cstrong\u003ePower:\u003c\/strong\u003e The Microtubes B7K Ultra v2 has a current draw of 110mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons, it does not accept batteries.","published_at":"2019-09-02T08:35:51-04:00","created_at":"2019-09-02T08:35:51-04:00","vendor":"Darkglass","type":"Pedals and Effects","tags":["Brand_Darkglass","reverbsync-offers:off","reverbsync-shipping-profile:free 2 day","Type_Bass Guitar Effect Pedals"],"price":39999,"price_min":39999,"price_max":39999,"available":true,"price_varies":false,"compare_at_price":55999,"compare_at_price_min":55999,"compare_at_price_max":55999,"compare_at_price_varies":false,"variants":[{"id":16512245596226,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6430054580199","requires_shipping":true,"taxable":true,"featured_image":{"id":11807045386306,"product_id":2021623332930,"position":1,"created_at":"2019-09-02T08:35:51-04:00","updated_at":"2019-09-02T08:54:09-04:00","alt":"Darkglass Microtubes B7K Ul V2","width":940,"height":940,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MictubB7K-Ult-v2_01.jpg?v=1567428849","variant_ids":[16512245596226]},"available":true,"name":"Darkglass Microtubes B7K Ultra V2 Bass Preamp Pedal","public_title":null,"options":["Default Title"],"price":39999,"weight":0,"compare_at_price":55999,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6430054580199"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MictubB7K-Ult-v2_01.jpg?v=1567428849","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MictubB7K-Ult-v2_02.jpg?v=1567428860"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MictubB7K-Ult-v2_01.jpg?v=1567428849","options":["Title"],"content":"Microtubes B7K Ultra v2 - Bass Preamp\u003cbr\u003e\u003cbr\u003eThe upgraded Microtubes B7K Ultra features all the versatility and sonic possibilities of the first version plus: (1) Single user loadable cabinet simulation impulse response. (2) Micro-USB B port to connect to PC\/Mac to load a different Virtual Cabinet through the Darkglass Suite. (3) 3.5mm (1\/8\") headphone output with cabinet simulation. (4) Balanced XLR output with switchable cabinet simulation.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eMaster:\u003c\/strong\u003e Whereas the Level Knob controls the output of the overdrive section the Master volume adjusts the overall volume of the unit. Ideal for fine tuning the output on clean mode. It also serves as a DI level control.\u003cbr\u003e• \u003cstrong\u003eBlend:\u003c\/strong\u003e Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.\u003cbr\u003e• \u003cstrong\u003eLevel:\u003c\/strong\u003e Sets the volume of the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eDrive:\u003c\/strong\u003e Sets the amount of saturation in the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eAttack Switch:\u003c\/strong\u003e Sets the amount of treble content to saturate: The \"Boost\" setting emphasizes the treble content extra clarity and presence. The \"Flat\" position leaves this register untouched while the \"Cut\" position will reduce the amount of high frequencies being saturated.\u003cbr\u003e• \u003cstrong\u003eGrunt Switch:\u003c\/strong\u003e Sets the amount of low frequency content to saturate by selecting between three different bass boost levels before the clipping stage.\u003cbr\u003e• \u003cstrong\u003eBass:\u003c\/strong\u003e +-12dB at 100Hz\u003cbr\u003e• \u003cstrong\u003eLo Mids:\u003c\/strong\u003e +-12dB switchable 250Hz, 500Hz and 1kHz\u003cbr\u003e• \u003cstrong\u003eHi Mids:\u003c\/strong\u003e +-12dB switchable 750Hz, 1.5KHz and 3kHz\u003cbr\u003e• \u003cstrong\u003eTreble:\u003c\/strong\u003e +-12dB at 5kHz\u003cbr\u003e• \u003cstrong\u003eDirect Ouput:\u003c\/strong\u003e Balanced XLR output for connecting the pedal to a microphone preamp, PA system etc.\u003cbr\u003e• \u003cstrong\u003eGround lift:\u003c\/strong\u003e Disconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the 1\/4\" output.\u003cbr\u003e• \u003cstrong\u003eCab Sim:\u003c\/strong\u003e Toggle the cabinet simulation on\/off on the Direct Output. This switch completely bypasses all digital circuits and allows you to get a zero latency signal when needed.\u003cbr\u003e• \u003cstrong\u003eHeadphones:\u003c\/strong\u003e B7K Ultra has an internal stereo headphone amplifier capable of driving a minimum load of 16 ohms from the 3.5mm (1\/8”) stereo jack. Use the Master volume control to adjust the level. When the pedal is on bypass the master volume does not affect the headphone volume. In this case the total volume is adjustable in Darkglass Suite. With sensitive headphones the bypass volume can be very loud if not adjusted\u003cbr\u003e• \u003cstrong\u003eUSB:\u003c\/strong\u003e A Micro USB B connector allows you to connect the pedal to PC\/Mac to load cabinet simulation impulse responses to the pedal and control various other settings.\u003cbr\u003e• \u003cstrong\u003eDimensions:\u003c\/strong\u003e 4,92\" x 3,77\" x 2,24\"\u003cbr\u003e• \u003cstrong\u003ePower:\u003c\/strong\u003e The Microtubes B7K Ultra v2 has a current draw of 110mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons, it does not accept batteries."}
Darkglass Microtubes B7K Ul V2

Darkglass Microtubes B7K Ultra V2 Bass Preamp Pedal

$399.99

Microtubes B7K Ultra v2 - Bass PreampThe upgraded Microtubes B7K Ultra features all the versatility and sonic possibilities of the first version plus: (1) Single user loadable cabinet simulation impulse response. (2) Micro-USB B port to connect to PC/Mac to load a different Virtual Cabinet through the Darkglass Suite. (3) 3.5mm (1/8") headphone ...


More Info
{"id":2021623365698,"title":"Darkglass Microtubes X7 Bass Preamp Pedal","handle":"darkglass-microtubes-x7-bass-preamp-pedal","description":"Microtubes X7 - Bass Distortion with Graphic EQ\u003cbr\u003e\u003cbr\u003eThe Microtubes X series brings the studio method producers have been using the years to cover the whole bass distortion spectrum: from articulate high gain to punchy mild overdrive, raw and gnarly fuzz and everything in between. You now have absolute control in constructing your vision of what the perfect bass distortion texture, definition, and size should have.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eHigh Pass Frequency:\u003c\/strong\u003e Controls the cutoff frequency to be distorted, ranging from 100Hz (for thicker, fuzzier saturation) or 1kHz for ultra-sharp definition.\u003cbr\u003e• \u003cstrong\u003eHigh Drive:\u003c\/strong\u003e Sets the amount of distortion for the high pass side.\u003cbr\u003e• \u003cstrong\u003eHigh Level:\u003c\/strong\u003e Sets the output volume of the distorted high-pass signal.\u003cbr\u003e• \u003cstrong\u003eLow Pass Frequency:\u003c\/strong\u003e Controls the cutoff frequency to be mixed back to the high-pass side. Ranging from 50Hz (for only sub-bass) and 500Hz to preserve some clean mids.\u003cbr\u003e• \u003cstrong\u003eLow Comp:\u003c\/strong\u003e Sets the amount of compression for the low-pass signal.\u003cbr\u003e• \u003cstrong\u003eLow Level:\u003c\/strong\u003e Sets the output volume of the low-pass signal.\u003cbr\u003e• \u003cstrong\u003eMaster:\u003c\/strong\u003e Sets the overall volume of the unit.\u003cbr\u003e• \u003cstrong\u003eLow shelf:\u003c\/strong\u003e +-12dB at 80 Hz\u003cbr\u003e• \u003cstrong\u003e500 Hz:\u003c\/strong\u003e +-12dB\u003cbr\u003e• \u003cstrong\u003e1 kHz:\u003c\/strong\u003e +-12dB\u003cbr\u003e• \u003cstrong\u003eHigh shelf:\u003c\/strong\u003e +-12dB at 5 kHz\u003cbr\u003e• \u003cstrong\u003eParallel Output:\u003c\/strong\u003e A passthrough for your input signal, useful for parallel processing.\u003cbr\u003e• \u003cstrong\u003eDirect Output:\u003c\/strong\u003e A balanced version of the 1\/4\" output, useful for running into PA’s or studio mixing consoles.\u003cbr\u003e• \u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.72” × 4.21”\u003cbr\u003e• \u003cstrong\u003ePower:\u003c\/strong\u003e The Microtubes X7 has a current draw of 70mA. Only use a regulated 9V-18V DC adapter with a center-negative plug.","published_at":"2019-09-02T08:35:56-04:00","created_at":"2019-09-02T08:35:56-04:00","vendor":"Darkglass","type":"Pedals and Effects","tags":["Brand_Darkglass","reverbsync-offers:off","reverbsync-shipping-profile:free 2 day","Type_Bass Guitar Effect Pedals"],"price":29999,"price_min":29999,"price_max":29999,"available":true,"price_varies":false,"compare_at_price":41999,"compare_at_price_min":41999,"compare_at_price_max":41999,"compare_at_price_varies":false,"variants":[{"id":16512245628994,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6430054580281","requires_shipping":true,"taxable":true,"featured_image":{"id":11807045615682,"product_id":2021623365698,"position":1,"created_at":"2019-09-02T08:35:56-04:00","updated_at":"2019-09-02T08:35:56-04:00","alt":"Darkglass Microtubes X7","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicrotubesX7_01.jpg?v=1567427756","variant_ids":[16512245628994]},"available":true,"name":"Darkglass Microtubes X7 Bass Preamp Pedal","public_title":null,"options":["Default Title"],"price":29999,"weight":0,"compare_at_price":41999,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6430054580281"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicrotubesX7_01.jpg?v=1567427756","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicrotubesX7_02.jpg?v=1567429021","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicrotubesX7_03.jpg?v=1567429023","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicrotubesX7_04.jpg?v=1567429025"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicrotubesX7_01.jpg?v=1567427756","options":["Title"],"content":"Microtubes X7 - Bass Distortion with Graphic EQ\u003cbr\u003e\u003cbr\u003eThe Microtubes X series brings the studio method producers have been using the years to cover the whole bass distortion spectrum: from articulate high gain to punchy mild overdrive, raw and gnarly fuzz and everything in between. You now have absolute control in constructing your vision of what the perfect bass distortion texture, definition, and size should have.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eHigh Pass Frequency:\u003c\/strong\u003e Controls the cutoff frequency to be distorted, ranging from 100Hz (for thicker, fuzzier saturation) or 1kHz for ultra-sharp definition.\u003cbr\u003e• \u003cstrong\u003eHigh Drive:\u003c\/strong\u003e Sets the amount of distortion for the high pass side.\u003cbr\u003e• \u003cstrong\u003eHigh Level:\u003c\/strong\u003e Sets the output volume of the distorted high-pass signal.\u003cbr\u003e• \u003cstrong\u003eLow Pass Frequency:\u003c\/strong\u003e Controls the cutoff frequency to be mixed back to the high-pass side. Ranging from 50Hz (for only sub-bass) and 500Hz to preserve some clean mids.\u003cbr\u003e• \u003cstrong\u003eLow Comp:\u003c\/strong\u003e Sets the amount of compression for the low-pass signal.\u003cbr\u003e• \u003cstrong\u003eLow Level:\u003c\/strong\u003e Sets the output volume of the low-pass signal.\u003cbr\u003e• \u003cstrong\u003eMaster:\u003c\/strong\u003e Sets the overall volume of the unit.\u003cbr\u003e• \u003cstrong\u003eLow shelf:\u003c\/strong\u003e +-12dB at 80 Hz\u003cbr\u003e• \u003cstrong\u003e500 Hz:\u003c\/strong\u003e +-12dB\u003cbr\u003e• \u003cstrong\u003e1 kHz:\u003c\/strong\u003e +-12dB\u003cbr\u003e• \u003cstrong\u003eHigh shelf:\u003c\/strong\u003e +-12dB at 5 kHz\u003cbr\u003e• \u003cstrong\u003eParallel Output:\u003c\/strong\u003e A passthrough for your input signal, useful for parallel processing.\u003cbr\u003e• \u003cstrong\u003eDirect Output:\u003c\/strong\u003e A balanced version of the 1\/4\" output, useful for running into PA’s or studio mixing consoles.\u003cbr\u003e• \u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.72” × 4.21”\u003cbr\u003e• \u003cstrong\u003ePower:\u003c\/strong\u003e The Microtubes X7 has a current draw of 70mA. Only use a regulated 9V-18V DC adapter with a center-negative plug."}
Darkglass Microtubes X7

Darkglass Microtubes X7 Bass Preamp Pedal

$299.99

Microtubes X7 - Bass Distortion with Graphic EQThe Microtubes X series brings the studio method producers have been using the years to cover the whole bass distortion spectrum: from articulate high gain to punchy mild overdrive, raw and gnarly fuzz and everything in between. You now have absolute control in constructing your vision of what the p...


More Info
{"id":2021623070786,"title":"Darkglass Microtubes 900 v2 - 900-watt Bass Head","handle":"darkglass-microtubes-900-v2-900-watt-bass-head","description":"Microtubes 900 v2 - 900 Watt Solid State Bass Guitar Amplifier Head\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBe Heard\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThree years ago Darkglass Electronics released it’s first amplifier, the Microtubes 900. Its unusual features, and design embodied the Darkglass ethos like none of their previous products. It was an uncompromising amplifier, incredibly versatile, and unapologetically loud. Now, a thousand days after the first Microtubes 900 saw the light of day, they are proud to announce the next step in its evolution, the Microtubes 900 v2. \u003cbr\u003e\u003cbr\u003eWith enhanced durability, improved equalizer, studio-grade compression, impulse response cabinet emulation, and MIDI control, the Microtubes 900 v2 features all the options the modern, professional bassist needs in a compact, sleek, and loud format.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFront Panel Features\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eInput: \u003c\/strong\u003e Use this jack to connect your instrument via a standard 1\/4” mono cable.\u003cbr\u003e• \u003cstrong\u003ePassive\/Active: \u003c\/strong\u003e Use this push-button switch to change from passive to active mode\u003cbr\u003e• \u003cstrong\u003eMicrotubes: \u003c\/strong\u003e Use this push button to turn on or off the Microtubes Engine to add natural compression, organic harmonic enhancement, and saturation ranging from mild overdrive to high gain bass rage. \u003cbr\u003e• \u003cstrong\u003eCompression: \u003c\/strong\u003e This knob controls the amount of dynamic compression added to the Microtubes Engine. \u003cbr\u003e• \u003cstrong\u003eDrive: \u003c\/strong\u003e This knob controls the amount of distortion that the Microtubes Engine will deliver. \u003cbr\u003e• \u003cstrong\u003eTone: \u003c\/strong\u003e This knob controls the high harmonic content of the Microtubes Engine via a variable low pass filter.\u003cbr\u003e• \u003cstrong\u003eLevel: \u003c\/strong\u003e Use this knob to control Microtubes Engine’s output volume.\u003cbr\u003e• \u003cstrong\u003eBlend: \u003c\/strong\u003e Use this knob to mix between the Clean signal and the Distortion signal (Microtubes Engine).\u003cbr\u003e• \u003cstrong\u003eB3K\/VMT: \u003c\/strong\u003e This push-button switch selects between two overdrive voicings: B3K mode will deliver an aggressive, percussive sound while the VMT will bring up the mids for a warmer, more neutral character.\u003cbr\u003e• \u003cstrong\u003eGain: \u003c\/strong\u003e Use this knob to change the volume of the signal before the Active 6 Band EQ. \u003cbr\u003e• \u003cstrong\u003eBass: \u003c\/strong\u003e +-12dB at 80Hz. \u003cbr\u003e• \u003cstrong\u003eMids: \u003c\/strong\u003e +-12dB at 250, 500,1.5K and 3Khz. \u003cbr\u003e• \u003cstrong\u003eTreble: \u003c\/strong\u003e +-12dB at 5kHz.\u003cbr\u003e• \u003cstrong\u003eMaster: \u003c\/strong\u003e Use this knob to control the overall volume of the amplifier.\u003cbr\u003e• \u003cstrong\u003eDimensions (L x H x W): \u003c\/strong\u003e 10.5” x 2.75” x 10” \u003cbr\u003e• \u003cstrong\u003eWeight: \u003c\/strong\u003e 6.39 lbs\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBack Panel Features\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eSpeaker Output: \u003c\/strong\u003e Use this connector to connect the amplifier to your cabinet. \u003cbr\u003e• \u003cstrong\u003eMin-Load: \u003c\/strong\u003e Press this switch when using a 2 ohm load. You can use this control to lower the output if your 4 ohm cabinet is not able handle more than 500W (you can also get 350W with an 8 ohm cabinet in this configuration).\u003cbr\u003e• \u003cstrong\u003eSend: \u003c\/strong\u003e Use this output to send the signal to effects pedals.\u003cbr\u003e• \u003cstrong\u003eReturn: \u003c\/strong\u003e Use this input to receive the signal from effects pedals. Master volume control is after this input.\u003cbr\u003e• \u003cstrong\u003ePre DI Output: \u003c\/strong\u003e Use this output to send a balanced copy of your input signal to recording equipment, mixer etc. \u003cbr\u003e• \u003cstrong\u003ePost DI Output: \u003c\/strong\u003e The signal for this output is taken after the distortion, EQ and effects loop, and processed through the cabinet simulation engine. \u003cbr\u003e• \u003cstrong\u003eUSB: \u003c\/strong\u003e The USB connector allows you to use the Darkglass Suite software to load different cabinet impulses or change different parameters on your amp (MIDI, compressor, etc)\u003cbr\u003e• \u003cstrong\u003eHeadphone Output: \u003c\/strong\u003e Connect your Headphones and enjoy the impulse based cabinet emulation.\u003cbr\u003e• \u003cstrong\u003eHeadphone Volume: \u003c\/strong\u003e This knob controls the volume of the headphone output.\u003cbr\u003e• \u003cstrong\u003eAux In: \u003c\/strong\u003e Use this connector to provide to the Headphone output music from your laptop, cellphone, mp3 player, etc.\u003cbr\u003e• \u003cstrong\u003eCabinet Select: \u003c\/strong\u003e Switches between 3 different cabinet impulses and bypass this section for a rawer sound. \u003cbr\u003e• \u003cstrong\u003eMIDI: \u003c\/strong\u003e The MIDI input allows you to change channels, toggle the mute and compressor, and select the cabinet simulation slot with any standard MIDI device. \u003cbr\u003e• \u003cstrong\u003eFootswitch: \u003c\/strong\u003e The Intelligent Footswitch is proprietary digitally controlled device that allows you to remotely engage and disengage the Microtubes Engine.","published_at":"2019-09-02T08:35:39-04:00","created_at":"2019-09-02T08:35:39-04:00","vendor":"Darkglass","type":"Amplifiers","tags":["Brand_Darkglass","New","reverbsync-force:on","reverbsync-offers:off","reverbsync-shipping-profile:free","Type_Bass Heads"],"price":109999,"price_min":109999,"price_max":109999,"available":true,"price_varies":false,"compare_at_price":149999,"compare_at_price_min":149999,"compare_at_price_max":149999,"compare_at_price_varies":false,"variants":[{"id":16512244645954,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6430054580298","requires_shipping":true,"taxable":true,"featured_image":{"id":11807044567106,"product_id":2021623070786,"position":1,"created_at":"2019-09-02T08:35:39-04:00","updated_at":"2019-09-02T08:35:39-04:00","alt":"Darkglass MICROTUBES 900V2 HD","width":1500,"height":1500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicTub900v2Hed_01.jpg?v=1567427739","variant_ids":[16512244645954]},"available":true,"name":"Darkglass Microtubes 900 v2 - 900-watt Bass Head","public_title":null,"options":["Default Title"],"price":109999,"weight":0,"compare_at_price":149999,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6430054580298"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicTub900v2Hed_01.jpg?v=1567427739","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicTub900v2Hed_02.jpg?v=1567428567","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicTub900v2Hed_03.jpg?v=1567428569","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicTub900v2Hed_04.jpg?v=1567428571","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicTub900v2Hed_05.jpg?v=1567428573","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicTub900v2Hed_06.jpg?v=1567428574"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicTub900v2Hed_01.jpg?v=1567427739","options":["Title"],"content":"Microtubes 900 v2 - 900 Watt Solid State Bass Guitar Amplifier Head\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBe Heard\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThree years ago Darkglass Electronics released it’s first amplifier, the Microtubes 900. Its unusual features, and design embodied the Darkglass ethos like none of their previous products. It was an uncompromising amplifier, incredibly versatile, and unapologetically loud. Now, a thousand days after the first Microtubes 900 saw the light of day, they are proud to announce the next step in its evolution, the Microtubes 900 v2. \u003cbr\u003e\u003cbr\u003eWith enhanced durability, improved equalizer, studio-grade compression, impulse response cabinet emulation, and MIDI control, the Microtubes 900 v2 features all the options the modern, professional bassist needs in a compact, sleek, and loud format.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFront Panel Features\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eInput: \u003c\/strong\u003e Use this jack to connect your instrument via a standard 1\/4” mono cable.\u003cbr\u003e• \u003cstrong\u003ePassive\/Active: \u003c\/strong\u003e Use this push-button switch to change from passive to active mode\u003cbr\u003e• \u003cstrong\u003eMicrotubes: \u003c\/strong\u003e Use this push button to turn on or off the Microtubes Engine to add natural compression, organic harmonic enhancement, and saturation ranging from mild overdrive to high gain bass rage. \u003cbr\u003e• \u003cstrong\u003eCompression: \u003c\/strong\u003e This knob controls the amount of dynamic compression added to the Microtubes Engine. \u003cbr\u003e• \u003cstrong\u003eDrive: \u003c\/strong\u003e This knob controls the amount of distortion that the Microtubes Engine will deliver. \u003cbr\u003e• \u003cstrong\u003eTone: \u003c\/strong\u003e This knob controls the high harmonic content of the Microtubes Engine via a variable low pass filter.\u003cbr\u003e• \u003cstrong\u003eLevel: \u003c\/strong\u003e Use this knob to control Microtubes Engine’s output volume.\u003cbr\u003e• \u003cstrong\u003eBlend: \u003c\/strong\u003e Use this knob to mix between the Clean signal and the Distortion signal (Microtubes Engine).\u003cbr\u003e• \u003cstrong\u003eB3K\/VMT: \u003c\/strong\u003e This push-button switch selects between two overdrive voicings: B3K mode will deliver an aggressive, percussive sound while the VMT will bring up the mids for a warmer, more neutral character.\u003cbr\u003e• \u003cstrong\u003eGain: \u003c\/strong\u003e Use this knob to change the volume of the signal before the Active 6 Band EQ. \u003cbr\u003e• \u003cstrong\u003eBass: \u003c\/strong\u003e +-12dB at 80Hz. \u003cbr\u003e• \u003cstrong\u003eMids: \u003c\/strong\u003e +-12dB at 250, 500,1.5K and 3Khz. \u003cbr\u003e• \u003cstrong\u003eTreble: \u003c\/strong\u003e +-12dB at 5kHz.\u003cbr\u003e• \u003cstrong\u003eMaster: \u003c\/strong\u003e Use this knob to control the overall volume of the amplifier.\u003cbr\u003e• \u003cstrong\u003eDimensions (L x H x W): \u003c\/strong\u003e 10.5” x 2.75” x 10” \u003cbr\u003e• \u003cstrong\u003eWeight: \u003c\/strong\u003e 6.39 lbs\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBack Panel Features\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eSpeaker Output: \u003c\/strong\u003e Use this connector to connect the amplifier to your cabinet. \u003cbr\u003e• \u003cstrong\u003eMin-Load: \u003c\/strong\u003e Press this switch when using a 2 ohm load. You can use this control to lower the output if your 4 ohm cabinet is not able handle more than 500W (you can also get 350W with an 8 ohm cabinet in this configuration).\u003cbr\u003e• \u003cstrong\u003eSend: \u003c\/strong\u003e Use this output to send the signal to effects pedals.\u003cbr\u003e• \u003cstrong\u003eReturn: \u003c\/strong\u003e Use this input to receive the signal from effects pedals. Master volume control is after this input.\u003cbr\u003e• \u003cstrong\u003ePre DI Output: \u003c\/strong\u003e Use this output to send a balanced copy of your input signal to recording equipment, mixer etc. \u003cbr\u003e• \u003cstrong\u003ePost DI Output: \u003c\/strong\u003e The signal for this output is taken after the distortion, EQ and effects loop, and processed through the cabinet simulation engine. \u003cbr\u003e• \u003cstrong\u003eUSB: \u003c\/strong\u003e The USB connector allows you to use the Darkglass Suite software to load different cabinet impulses or change different parameters on your amp (MIDI, compressor, etc)\u003cbr\u003e• \u003cstrong\u003eHeadphone Output: \u003c\/strong\u003e Connect your Headphones and enjoy the impulse based cabinet emulation.\u003cbr\u003e• \u003cstrong\u003eHeadphone Volume: \u003c\/strong\u003e This knob controls the volume of the headphone output.\u003cbr\u003e• \u003cstrong\u003eAux In: \u003c\/strong\u003e Use this connector to provide to the Headphone output music from your laptop, cellphone, mp3 player, etc.\u003cbr\u003e• \u003cstrong\u003eCabinet Select: \u003c\/strong\u003e Switches between 3 different cabinet impulses and bypass this section for a rawer sound. \u003cbr\u003e• \u003cstrong\u003eMIDI: \u003c\/strong\u003e The MIDI input allows you to change channels, toggle the mute and compressor, and select the cabinet simulation slot with any standard MIDI device. \u003cbr\u003e• \u003cstrong\u003eFootswitch: \u003c\/strong\u003e The Intelligent Footswitch is proprietary digitally controlled device that allows you to remotely engage and disengage the Microtubes Engine."}
Darkglass MICROTUBES 900V2 HD

Darkglass Microtubes 900 v2 - 900-watt Bass Head
New

$1,099.99

Microtubes 900 v2 - 900 Watt Solid State Bass Guitar Amplifier HeadBe HeardThree years ago Darkglass Electronics released it’s first amplifier, the Microtubes 900. Its unusual features, and design embodied the Darkglass ethos like none of their previous products. It was an uncompromising amplifier, incredibly versatile, and unapologetically loud...


More Info
{"id":2021623005250,"title":"Darkglass Microtubes 500 - 500-watt Bass Head","handle":"darkglass-microtubes-500-500-watt-bass-head","description":"Microtubes 500 Head - 500 Watt Solid State Bass Guitar Amplifier Head\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMassive Tone for the Masses\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Microtubes 500 is a 500W amplifier equipped with an all analog solid state preamplifier and a Class D Power Module.\u003cbr\u003e\u003cbr\u003eOn the top row, you will find the clean section which is the foundation of your tone. It features a Gain control and an active 4 band EQ: along with Low and Treble controls, you will find Low Mids and Hi Mids controls, each knob with their own 2-way frequency switch.\u003cbr\u003e\u003cbr\u003eOn the bottom row, you will find the Microtubes Engine, an extra channel that will bring your clean tone to the next level by helping you cut through the mix while adding anything from subtle, tube-like, harmonics and natural compression to obliterating distortion.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Front Panel Features \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003e Input:\u003c\/strong\u003e Connect your instrument via a standard 1\/4” mono cable.\u003cbr\u003e• \u003cstrong\u003e Passive\/Active:\u003c\/strong\u003e Switch from passive to active mode. \u003cbr\u003e• \u003cstrong\u003e Microtubes:\u003c\/strong\u003e Engages the Microtubes Engine to add natural compression, organic harmonic enhancement, and saturation ranging from mild overdrive to high gain bass rage. \u003cbr\u003e• \u003cstrong\u003e Drive:\u003c\/strong\u003e Sets the Microtubes Engine’s distortion level. \u003cbr\u003e• \u003cstrong\u003e Tone:\u003c\/strong\u003e Controls the high harmonic content of the Microtubes Engine \u003cbr\u003e• \u003cstrong\u003e Level:\u003c\/strong\u003e Controls the Microtubes Engine’s output volume.\u003cbr\u003e• \u003cstrong\u003e Blend:\u003c\/strong\u003e Mixes between the Clean and Distortion signals \u003cbr\u003e• \u003cstrong\u003e B3K\/VMT:\u003c\/strong\u003e Selects between two overdrive circuits: B3K mode will deliver an aggressive, percussive sound while the VMT will bring up the mids for a warmer, more neutral character.\u003cbr\u003e• \u003cstrong\u003e Gain:\u003c\/strong\u003e Changes the volume of the signal driving the Active 4 Band EQ. \u003cbr\u003e• \u003cstrong\u003e Bass:\u003c\/strong\u003e +-12dB at 80Hz. \u003cbr\u003e• \u003cstrong\u003e Low Mids:\u003c\/strong\u003e +-12dB of the selected frequency via the LOW MIDS ƒ switch \u003cbr\u003e• \u003cstrong\u003e Low Mids ƒ:\u003c\/strong\u003e Use this switch to change the frequency of the low mid band between 250Hz and 500Hz.\u003cbr\u003e• \u003cstrong\u003e Hi Mids:\u003c\/strong\u003e +-12dB of the selected frequency via the HI MIDS ƒ switch\u003cbr\u003e• \u003cstrong\u003e Hi Mids ƒ:\u003c\/strong\u003e Use this switch to change the frequency of the hi mid band between 1.5kHz and 3kHZ.\u003cbr\u003e• \u003cstrong\u003e Treble:\u003c\/strong\u003e +-12dB at 5kHz.\u003cbr\u003e• \u003cstrong\u003e Master:\u003c\/strong\u003e Controls the overall volume of the amplifier. \u003cbr\u003e• \u003cstrong\u003e Footswitch:\u003c\/strong\u003e The Footswitch jack allows you to remotely engage and disengage the Microtubes Engine via the Darkglass Intelligent Footswitch (sold separately). \u003cbr\u003e• \u003cstrong\u003e Dimensions:\u003c\/strong\u003e 9.13” x 7.48:” x 2.87”\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Back Panel Features\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003e Speaker Output:\u003c\/strong\u003e Speakon combo jack connects the amplifier to your cabinet. The minimum load for the amplifier is 4 ohm. \u003cbr\u003e• \u003cstrong\u003e Headphone Output:\u003c\/strong\u003e Headphones with 1\/4” plug connector can be connected to this jack. \u003cbr\u003e• \u003cstrong\u003e Send:\u003c\/strong\u003e Line level effects loop output. \u003cbr\u003e• \u003cstrong\u003e Return:\u003c\/strong\u003e Line level effects loop input. Connect the output from your effects loop pedals to this connector.\u003cbr\u003e• \u003cstrong\u003e Post-Pre:\u003c\/strong\u003e Selects which signal will be sent to the Balanced output. \u003cbr\u003e• \u003cstrong\u003e Ground Lift:\u003c\/strong\u003e Lifts the ground of the Balanced output\u003cbr\u003e• \u003cstrong\u003e Balanced Output:\u003c\/strong\u003e Connects the Microtubes 500 preamplifier to balanced equipment via a standard XLR connector.","published_at":"2019-09-02T08:35:34-04:00","created_at":"2019-09-02T08:35:34-04:00","vendor":"Darkglass","type":"Amplifiers","tags":["Brand_Darkglass","New","reverbsync-offers:off","reverbsync-shipping-profile:free","Type_Bass Heads"],"price":74999,"price_min":74999,"price_max":74999,"available":true,"price_varies":false,"compare_at_price":104999,"compare_at_price_min":104999,"compare_at_price_max":104999,"compare_at_price_varies":false,"variants":[{"id":16512244613186,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6430054580083","requires_shipping":true,"taxable":true,"featured_image":{"id":11807044436034,"product_id":2021623005250,"position":1,"created_at":"2019-09-02T08:35:34-04:00","updated_at":"2019-09-02T08:35:34-04:00","alt":"Darkglass MICROTUBE 500 HEAD","width":1366,"height":1366,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicTub500Head_01.jpg?v=1567427734","variant_ids":[16512244613186]},"available":true,"name":"Darkglass Microtubes 500 - 500-watt Bass Head","public_title":null,"options":["Default Title"],"price":74999,"weight":0,"compare_at_price":104999,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6430054580083"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicTub500Head_01.jpg?v=1567427734","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicTub500Head_02.jpg?v=1567428504","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicTub500Head_03.jpg?v=1567428506","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicTub500Head_04.jpg?v=1567428508"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicTub500Head_01.jpg?v=1567427734","options":["Title"],"content":"Microtubes 500 Head - 500 Watt Solid State Bass Guitar Amplifier Head\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMassive Tone for the Masses\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Microtubes 500 is a 500W amplifier equipped with an all analog solid state preamplifier and a Class D Power Module.\u003cbr\u003e\u003cbr\u003eOn the top row, you will find the clean section which is the foundation of your tone. It features a Gain control and an active 4 band EQ: along with Low and Treble controls, you will find Low Mids and Hi Mids controls, each knob with their own 2-way frequency switch.\u003cbr\u003e\u003cbr\u003eOn the bottom row, you will find the Microtubes Engine, an extra channel that will bring your clean tone to the next level by helping you cut through the mix while adding anything from subtle, tube-like, harmonics and natural compression to obliterating distortion.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Front Panel Features \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003e Input:\u003c\/strong\u003e Connect your instrument via a standard 1\/4” mono cable.\u003cbr\u003e• \u003cstrong\u003e Passive\/Active:\u003c\/strong\u003e Switch from passive to active mode. \u003cbr\u003e• \u003cstrong\u003e Microtubes:\u003c\/strong\u003e Engages the Microtubes Engine to add natural compression, organic harmonic enhancement, and saturation ranging from mild overdrive to high gain bass rage. \u003cbr\u003e• \u003cstrong\u003e Drive:\u003c\/strong\u003e Sets the Microtubes Engine’s distortion level. \u003cbr\u003e• \u003cstrong\u003e Tone:\u003c\/strong\u003e Controls the high harmonic content of the Microtubes Engine \u003cbr\u003e• \u003cstrong\u003e Level:\u003c\/strong\u003e Controls the Microtubes Engine’s output volume.\u003cbr\u003e• \u003cstrong\u003e Blend:\u003c\/strong\u003e Mixes between the Clean and Distortion signals \u003cbr\u003e• \u003cstrong\u003e B3K\/VMT:\u003c\/strong\u003e Selects between two overdrive circuits: B3K mode will deliver an aggressive, percussive sound while the VMT will bring up the mids for a warmer, more neutral character.\u003cbr\u003e• \u003cstrong\u003e Gain:\u003c\/strong\u003e Changes the volume of the signal driving the Active 4 Band EQ. \u003cbr\u003e• \u003cstrong\u003e Bass:\u003c\/strong\u003e +-12dB at 80Hz. \u003cbr\u003e• \u003cstrong\u003e Low Mids:\u003c\/strong\u003e +-12dB of the selected frequency via the LOW MIDS ƒ switch \u003cbr\u003e• \u003cstrong\u003e Low Mids ƒ:\u003c\/strong\u003e Use this switch to change the frequency of the low mid band between 250Hz and 500Hz.\u003cbr\u003e• \u003cstrong\u003e Hi Mids:\u003c\/strong\u003e +-12dB of the selected frequency via the HI MIDS ƒ switch\u003cbr\u003e• \u003cstrong\u003e Hi Mids ƒ:\u003c\/strong\u003e Use this switch to change the frequency of the hi mid band between 1.5kHz and 3kHZ.\u003cbr\u003e• \u003cstrong\u003e Treble:\u003c\/strong\u003e +-12dB at 5kHz.\u003cbr\u003e• \u003cstrong\u003e Master:\u003c\/strong\u003e Controls the overall volume of the amplifier. \u003cbr\u003e• \u003cstrong\u003e Footswitch:\u003c\/strong\u003e The Footswitch jack allows you to remotely engage and disengage the Microtubes Engine via the Darkglass Intelligent Footswitch (sold separately). \u003cbr\u003e• \u003cstrong\u003e Dimensions:\u003c\/strong\u003e 9.13” x 7.48:” x 2.87”\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Back Panel Features\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003e Speaker Output:\u003c\/strong\u003e Speakon combo jack connects the amplifier to your cabinet. The minimum load for the amplifier is 4 ohm. \u003cbr\u003e• \u003cstrong\u003e Headphone Output:\u003c\/strong\u003e Headphones with 1\/4” plug connector can be connected to this jack. \u003cbr\u003e• \u003cstrong\u003e Send:\u003c\/strong\u003e Line level effects loop output. \u003cbr\u003e• \u003cstrong\u003e Return:\u003c\/strong\u003e Line level effects loop input. Connect the output from your effects loop pedals to this connector.\u003cbr\u003e• \u003cstrong\u003e Post-Pre:\u003c\/strong\u003e Selects which signal will be sent to the Balanced output. \u003cbr\u003e• \u003cstrong\u003e Ground Lift:\u003c\/strong\u003e Lifts the ground of the Balanced output\u003cbr\u003e• \u003cstrong\u003e Balanced Output:\u003c\/strong\u003e Connects the Microtubes 500 preamplifier to balanced equipment via a standard XLR connector."}
Darkglass MICROTUBE 500 HEAD

Darkglass Microtubes 500 - 500-watt Bass Head
New

$749.99

Microtubes 500 Head - 500 Watt Solid State Bass Guitar Amplifier HeadMassive Tone for the MassesThe Microtubes 500 is a 500W amplifier equipped with an all analog solid state preamplifier and a Class D Power Module.On the top row, you will find the clean section which is the foundation of your tone. It features a Gain control and an active 4 ban...


More Info
{"id":2021623595074,"title":"Darkglass Vintage Microtubes Bass Preamp Pedal","handle":"darkglass-vintage-microtubes-bass-preamp-pedal","description":"Vintage Microtubes - Bass Distortion\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNo Tube, No Problem\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Microtubes Vintage is a Darkglass tribute to some of the most legendary sounds in rock history. It provides warm tube-like tones with a natural dynamic response that echoes the organic compression of old tube amps and reel-to-reel tape machines.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eLevel:\u003c\/strong\u003e Sets the volume of the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eDrive:\u003c\/strong\u003e Sets the amount of saturation in the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eBlend:\u003c\/strong\u003e Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.\u003cbr\u003e• \u003cstrong\u003eEra:\u003c\/strong\u003e Interacts with the Drive knob to shape the character of the pedal. Dial it down to get the warm midrange tones of the 70s or crank it up to get the punchy metallic tones of 80s and 90s rock.\u003cbr\u003e• \u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.45\" × 2.95\"\u003cbr\u003e• \u003cstrong\u003ePower:\u003c\/strong\u003e The Vintage Microtubes has a current draw of 20mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons it does not accept batteries.","published_at":"2019-09-02T08:36:10-04:00","created_at":"2019-09-02T08:36:10-04:00","vendor":"Darkglass","type":"Pedals and Effects","tags":["Brand_Darkglass","reverbsync-offers:off","reverbsync-shipping-profile:free 2 day","Type_Bass Guitar Effect Pedals"],"price":19999,"price_min":19999,"price_max":19999,"available":true,"price_varies":false,"compare_at_price":39999,"compare_at_price_min":39999,"compare_at_price_max":39999,"compare_at_price_varies":false,"variants":[{"id":16512246087746,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0881314190607","requires_shipping":true,"taxable":true,"featured_image":{"id":11807046467650,"product_id":2021623595074,"position":1,"created_at":"2019-09-02T08:36:10-04:00","updated_at":"2019-09-02T08:36:10-04:00","alt":"Darkglass VMT Vintage Mcrotube","width":1072,"height":1072,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_VintMicrotube_01.jpg?v=1567427770","variant_ids":[16512246087746]},"available":true,"name":"Darkglass Vintage Microtubes Bass Preamp Pedal","public_title":null,"options":["Default Title"],"price":19999,"weight":0,"compare_at_price":39999,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"0881314190607"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_VintMicrotube_01.jpg?v=1567427770","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_VintMicrotube_02.jpg?v=1567429106","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_VintMicrotube_03.jpg?v=1567429108","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_VintMicrotube_04.jpg?v=1567429110","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_VintMicrotube_06.jpg?v=1567429111","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_VintMicrotube_07.jpg?v=1567429113","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_VintMicrotube_08.jpg?v=1567429114","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_VintMicrotube_09.jpg?v=1567429116","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_VintMicrotube_10.jpg?v=1567429117","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_VintMicrotube_11.jpg?v=1567429119","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_VintMicrotube_12.jpg?v=1567429121"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_VintMicrotube_01.jpg?v=1567427770","options":["Title"],"content":"Vintage Microtubes - Bass Distortion\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNo Tube, No Problem\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Microtubes Vintage is a Darkglass tribute to some of the most legendary sounds in rock history. It provides warm tube-like tones with a natural dynamic response that echoes the organic compression of old tube amps and reel-to-reel tape machines.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eLevel:\u003c\/strong\u003e Sets the volume of the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eDrive:\u003c\/strong\u003e Sets the amount of saturation in the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eBlend:\u003c\/strong\u003e Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.\u003cbr\u003e• \u003cstrong\u003eEra:\u003c\/strong\u003e Interacts with the Drive knob to shape the character of the pedal. Dial it down to get the warm midrange tones of the 70s or crank it up to get the punchy metallic tones of 80s and 90s rock.\u003cbr\u003e• \u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.45\" × 2.95\"\u003cbr\u003e• \u003cstrong\u003ePower:\u003c\/strong\u003e The Vintage Microtubes has a current draw of 20mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons it does not accept batteries."}
Darkglass VMT Vintage Mcrotube

Darkglass Vintage Microtubes Bass Preamp Pedal

$199.99

Vintage Microtubes - Bass DistortionNo Tube, No ProblemThe Microtubes Vintage is a Darkglass tribute to some of the most legendary sounds in rock history. It provides warm tube-like tones with a natural dynamic response that echoes the organic compression of old tube amps and reel-to-reel tape machines.Features:• Level: Sets the volume of the ov...


More Info
{"id":2021623529538,"title":"Darkglass SIFS Super Intelligent Footswitch","handle":"darkglass-sifs-super-intelligent-footswitch","description":"Super Intelligent Footswitch - Accessory Footswitch for Darkglass Amplifiers\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe Prefect Match\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Super Intelligent Footswitch is the perfect match for the Darkglass award winning Microtubes 900 Amplifier. It allows for easy access to the wide tonal options the amplifier offers: Clean channel, Vintage Microtubes and Microtubes B3K overdrives and Mute are now a stomp away.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eClean:\u003c\/strong\u003e Crisp, transparent and incredible versatile clean channel with 4 Band EQ.\u003cbr\u003e• \u003cstrong\u003eVMT:\u003c\/strong\u003e Will bring up the mids for a warmer, more neutral character of the Darkglass Vintage Microtubes.\u003cbr\u003e• \u003cstrong\u003eB3K:\u003c\/strong\u003e Will deliver an aggressive, percussive sound of the Darkglass Microtubes B3k.\u003cbr\u003e• \u003cstrong\u003eMute:\u003c\/strong\u003e Mutes the amplifier for tuning or other purpose.\u003cbr\u003e• \u003cstrong\u003eDimensions (L x D x H):\u003c\/strong\u003e 8.7” x 1.8” x 1.9”\u003cbr\u003e• \u003cstrong\u003eWeight:\u003c\/strong\u003e Approx. 1lb.\u003cbr\u003e• \u003cstrong\u003eNote:\u003c\/strong\u003e The Super Intelligent Footswitch will only work with Darkglass amplifiers (Microtubes 500 and Microtubes 900)","published_at":"2019-09-02T08:36:05-04:00","created_at":"2019-09-02T08:36:05-04:00","vendor":"Darkglass","type":"Amplifiers","tags":["Brand_Darkglass","reverbsync-offers:off","reverbsync-shipping-profile:free 2 day","Type_Bass Guitar Effect Pedals","Type_Footswitch Pedals"],"price":9999,"price_min":9999,"price_max":9999,"available":true,"price_varies":false,"compare_at_price":13999,"compare_at_price_min":13999,"compare_at_price_max":13999,"compare_at_price_varies":false,"variants":[{"id":16512246054978,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6430054580052","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Darkglass SIFS Super Intelligent Footswitch","public_title":null,"options":["Default Title"],"price":9999,"weight":0,"compare_at_price":13999,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6430054580052"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_SuperIntel_FS_01_ce2e5fb6-64fb-4ae2-a5b8-a3a885334f9b.jpg?v=1567444326","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_SuperIntel_FS_02.jpg?v=1567444326","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_SuperIntel_FS_03.jpg?v=1567444326","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_SuperIntel_FS_04.jpg?v=1567444326","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_SuperIntel_FS_05.jpg?v=1567444326"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_SuperIntel_FS_01_ce2e5fb6-64fb-4ae2-a5b8-a3a885334f9b.jpg?v=1567444326","options":["Title"],"content":"Super Intelligent Footswitch - Accessory Footswitch for Darkglass Amplifiers\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe Prefect Match\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Super Intelligent Footswitch is the perfect match for the Darkglass award winning Microtubes 900 Amplifier. It allows for easy access to the wide tonal options the amplifier offers: Clean channel, Vintage Microtubes and Microtubes B3K overdrives and Mute are now a stomp away.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eClean:\u003c\/strong\u003e Crisp, transparent and incredible versatile clean channel with 4 Band EQ.\u003cbr\u003e• \u003cstrong\u003eVMT:\u003c\/strong\u003e Will bring up the mids for a warmer, more neutral character of the Darkglass Vintage Microtubes.\u003cbr\u003e• \u003cstrong\u003eB3K:\u003c\/strong\u003e Will deliver an aggressive, percussive sound of the Darkglass Microtubes B3k.\u003cbr\u003e• \u003cstrong\u003eMute:\u003c\/strong\u003e Mutes the amplifier for tuning or other purpose.\u003cbr\u003e• \u003cstrong\u003eDimensions (L x D x H):\u003c\/strong\u003e 8.7” x 1.8” x 1.9”\u003cbr\u003e• \u003cstrong\u003eWeight:\u003c\/strong\u003e Approx. 1lb.\u003cbr\u003e• \u003cstrong\u003eNote:\u003c\/strong\u003e The Super Intelligent Footswitch will only work with Darkglass amplifiers (Microtubes 500 and Microtubes 900)"}
Darkglass SIFS Super Intelligent Footswitch

Darkglass SIFS Super Intelligent Footswitch

$99.99

Super Intelligent Footswitch - Accessory Footswitch for Darkglass AmplifiersThe Prefect MatchThe Super Intelligent Footswitch is the perfect match for the Darkglass award winning Microtubes 900 Amplifier. It allows for easy access to the wide tonal options the amplifier offers: Clean channel, Vintage Microtubes and Microtubes B3K overdrives and ...


More Info
{"id":2021623496770,"title":"Darkglass Microtubes X Bass Preamp Pedal","handle":"darkglass-microtubes-x-bass-preamp-pedal","description":"Microtubes X - Bass Distortion\u003cbr\u003e\u003cbr\u003eThe Microtubes X series brings the studio method producers have been using over the years to cover the whole bass distortion spectrum: from articulate high gain to punchy mild overdrive, raw and gnarly fuzz and everything in between. You now have absolute control in constructing your vision of what the perfect bass distortion texture, definition, and size should have.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eHigh-pass frequency:\u003c\/strong\u003e Controls the cutoff frequency to be distorted, ranging from 100Hz (for thicker, fuzzier saturation) or 1kHz for ultra-sharp definition.\u003cbr\u003e• \u003cstrong\u003eLow-pass frequency:\u003c\/strong\u003e Controls the cutoff frequency to be mixed back to the high-pass side. Ranging from 50Hz (for only sub-bass) and 500Hz to preserve some clean mids.\u003cbr\u003e• \u003cstrong\u003eLevel:\u003c\/strong\u003e Sets the overall output volume of the unit.\u003cbr\u003e• \u003cstrong\u003eDrive:\u003c\/strong\u003e Sets the amount of distortion for the high pass side.\u003cbr\u003e• \u003cstrong\u003eMix:\u003c\/strong\u003e Sets the blend between low-pass and high-pass signals.\u003cbr\u003e• \u003cstrong\u003eMids:\u003c\/strong\u003e Active mid control placed after the Mix control. +-12dB at 500Hz.\u003cbr\u003e• \u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.95” x 4.37” x 1.77”\u003cbr\u003e• \u003cstrong\u003ePower:\u003c\/strong\u003e The Microtubes X has a current draw of 30mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons, it does not accept batteries.","published_at":"2019-09-02T08:36:00-04:00","created_at":"2019-09-02T08:36:00-04:00","vendor":"Darkglass","type":"Pedals and Effects","tags":["Brand_Darkglass","reverbsync-offers:off","reverbsync-shipping-profile:free 2 day","Type_Bass Guitar Effect Pedals"],"price":19999,"price_min":19999,"price_max":19999,"available":true,"price_varies":false,"compare_at_price":39999,"compare_at_price_min":39999,"compare_at_price_max":39999,"compare_at_price_varies":false,"variants":[{"id":16512246022210,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6430054580274","requires_shipping":true,"taxable":true,"featured_image":{"id":11807046139970,"product_id":2021623496770,"position":1,"created_at":"2019-09-02T08:36:00-04:00","updated_at":"2019-09-02T08:36:00-04:00","alt":"Darkglass MIX Microtubes X","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicrotubesX_01.jpg?v=1567427760","variant_ids":[16512246022210]},"available":true,"name":"Darkglass Microtubes X Bass Preamp Pedal","public_title":null,"options":["Default Title"],"price":19999,"weight":0,"compare_at_price":39999,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6430054580274"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicrotubesX_01.jpg?v=1567427760","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicrotubesX_02.jpg?v=1567428983","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicrotubesX_03.jpg?v=1567428985","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicrotubesX_04.jpg?v=1567428987"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicrotubesX_01.jpg?v=1567427760","options":["Title"],"content":"Microtubes X - Bass Distortion\u003cbr\u003e\u003cbr\u003eThe Microtubes X series brings the studio method producers have been using over the years to cover the whole bass distortion spectrum: from articulate high gain to punchy mild overdrive, raw and gnarly fuzz and everything in between. You now have absolute control in constructing your vision of what the perfect bass distortion texture, definition, and size should have.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eHigh-pass frequency:\u003c\/strong\u003e Controls the cutoff frequency to be distorted, ranging from 100Hz (for thicker, fuzzier saturation) or 1kHz for ultra-sharp definition.\u003cbr\u003e• \u003cstrong\u003eLow-pass frequency:\u003c\/strong\u003e Controls the cutoff frequency to be mixed back to the high-pass side. Ranging from 50Hz (for only sub-bass) and 500Hz to preserve some clean mids.\u003cbr\u003e• \u003cstrong\u003eLevel:\u003c\/strong\u003e Sets the overall output volume of the unit.\u003cbr\u003e• \u003cstrong\u003eDrive:\u003c\/strong\u003e Sets the amount of distortion for the high pass side.\u003cbr\u003e• \u003cstrong\u003eMix:\u003c\/strong\u003e Sets the blend between low-pass and high-pass signals.\u003cbr\u003e• \u003cstrong\u003eMids:\u003c\/strong\u003e Active mid control placed after the Mix control. +-12dB at 500Hz.\u003cbr\u003e• \u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.95” x 4.37” x 1.77”\u003cbr\u003e• \u003cstrong\u003ePower:\u003c\/strong\u003e The Microtubes X has a current draw of 30mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons, it does not accept batteries."}
Darkglass MIX Microtubes X

Darkglass Microtubes X Bass Preamp Pedal

$199.99

Microtubes X - Bass DistortionThe Microtubes X series brings the studio method producers have been using over the years to cover the whole bass distortion spectrum: from articulate high gain to punchy mild overdrive, raw and gnarly fuzz and everything in between. You now have absolute control in constructing your vision of what the perfect bass ...


More Info
{"id":2021623267394,"title":"Darkglass Microtubes B7K V2 Bass Preamp Pedal","handle":"darkglass-microtubes-b7k-v2-bass-preamp-pedal","description":"Microtubes B7K v2 - Analog Bass Preamp\u003cbr\u003e\u003cbr\u003eWith the Microtubes B7K v2 you get all the features of the original, with the ability to better sculpture your tone: on the low mids you have the option to change the center frequency from 1KHz to 500Hz, and on the high mids you have the option to change the center frequency from 3kHz to 1.5kHz. This will enable you to tailor your absolute dream distortion tone. \u003cbr\u003e\u003cbr\u003eThe character and core of the Microtubes B7K remains the same, still retaining the powerful dynamic saturation circuit of the B3K and adds a four-band equalizer and a balanced line driver for even greater versatility. Designed for both studio and live use, it will take your direct sound to a whole new level.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eBlend:\u003c\/strong\u003e Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.\u003cbr\u003e• \u003cstrong\u003eLevel:\u003c\/strong\u003e Sets the volume of the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eDrive:\u003c\/strong\u003e Sets the amount of saturation in the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eGrunt Switch:\u003c\/strong\u003e Sets the amount of low frequency content to saturate by selecting between three different bass boost levels before the clipping stage.\u003cbr\u003e• \u003cstrong\u003eAttack Switch:\u003c\/strong\u003e Sets the amount of treble content to saturate: The \"Boost\" setting emphasizes the treble content extra clarity and presence. The \"Flat\" position leaves this register untouched while the \"Cut\" position will reduce the amount of high frequencies being saturated.\u003cbr\u003e• \u003cstrong\u003eLow:\u003c\/strong\u003e +-12dB at 100Hz\u003cbr\u003e• \u003cstrong\u003eLow Mids Switch:\u003c\/strong\u003e This switch change the center frequency of the Low Mids from 1kHz to 500Hz.\u003cbr\u003e• \u003cstrong\u003eLow Mids:\u003c\/strong\u003e +-12dB at 1kHz\u003cbr\u003e• \u003cstrong\u003eHi Mids:\u003c\/strong\u003e +-12dB at 3 kHz\u003cbr\u003e• \u003cstrong\u003eHi Mids Switch:\u003c\/strong\u003e This switch change the center frequency of the Hi Mids from 3kHz to 1.5kHz.\u003cbr\u003e• \u003cstrong\u003eTreble:\u003c\/strong\u003e +-12dB at 5kHz\u003cbr\u003e• \u003cstrong\u003eParallel Output:\u003c\/strong\u003e A passthrough for your input signal, useful for parallel processing.\u003cbr\u003e• \u003cstrong\u003eDirect Output:\u003c\/strong\u003e A balanced version of the 1\/4\" output, useful for running into PA’s or studio mixing consoles.\u003cbr\u003e• \u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.72” × 4.21”\u003cbr\u003e• \u003cstrong\u003ePower:\u003c\/strong\u003e The Microtubes B7K v2 has a current draw of 30mA. Only use a regulated 9V DC adapter with a center-negative plug.","published_at":"2019-09-02T08:35:48-04:00","created_at":"2019-09-02T08:35:48-04:00","vendor":"Darkglass","type":"Pedals and Effects","tags":["Brand_Darkglass","reverbsync-offers:off","reverbsync-shipping-profile:free 2 day","Type_Bass Guitar Effect Pedals"],"price":29999,"price_min":29999,"price_max":29999,"available":true,"price_varies":false,"compare_at_price":44995,"compare_at_price_min":44995,"compare_at_price_max":44995,"compare_at_price_varies":false,"variants":[{"id":16512245530690,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6430054580144","requires_shipping":true,"taxable":true,"featured_image":{"id":11807045091394,"product_id":2021623267394,"position":1,"created_at":"2019-09-02T08:35:48-04:00","updated_at":"2019-09-02T08:35:48-04:00","alt":"Darkglass Microtubes B7K 2.0","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MictubB7K-v2_01.jpg?v=1567427748","variant_ids":[16512245530690]},"available":true,"name":"Darkglass Microtubes B7K V2 Bass Preamp Pedal","public_title":null,"options":["Default Title"],"price":29999,"weight":0,"compare_at_price":44995,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6430054580144"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MictubB7K-v2_01.jpg?v=1567427748","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MictubB7K-v2_02.jpg?v=1567428923","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MictubB7K-v2_03.jpg?v=1567428925","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MictubB7K-v2_04.jpg?v=1567428927"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MictubB7K-v2_01.jpg?v=1567427748","options":["Title"],"content":"Microtubes B7K v2 - Analog Bass Preamp\u003cbr\u003e\u003cbr\u003eWith the Microtubes B7K v2 you get all the features of the original, with the ability to better sculpture your tone: on the low mids you have the option to change the center frequency from 1KHz to 500Hz, and on the high mids you have the option to change the center frequency from 3kHz to 1.5kHz. This will enable you to tailor your absolute dream distortion tone. \u003cbr\u003e\u003cbr\u003eThe character and core of the Microtubes B7K remains the same, still retaining the powerful dynamic saturation circuit of the B3K and adds a four-band equalizer and a balanced line driver for even greater versatility. Designed for both studio and live use, it will take your direct sound to a whole new level.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eBlend:\u003c\/strong\u003e Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.\u003cbr\u003e• \u003cstrong\u003eLevel:\u003c\/strong\u003e Sets the volume of the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eDrive:\u003c\/strong\u003e Sets the amount of saturation in the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eGrunt Switch:\u003c\/strong\u003e Sets the amount of low frequency content to saturate by selecting between three different bass boost levels before the clipping stage.\u003cbr\u003e• \u003cstrong\u003eAttack Switch:\u003c\/strong\u003e Sets the amount of treble content to saturate: The \"Boost\" setting emphasizes the treble content extra clarity and presence. The \"Flat\" position leaves this register untouched while the \"Cut\" position will reduce the amount of high frequencies being saturated.\u003cbr\u003e• \u003cstrong\u003eLow:\u003c\/strong\u003e +-12dB at 100Hz\u003cbr\u003e• \u003cstrong\u003eLow Mids Switch:\u003c\/strong\u003e This switch change the center frequency of the Low Mids from 1kHz to 500Hz.\u003cbr\u003e• \u003cstrong\u003eLow Mids:\u003c\/strong\u003e +-12dB at 1kHz\u003cbr\u003e• \u003cstrong\u003eHi Mids:\u003c\/strong\u003e +-12dB at 3 kHz\u003cbr\u003e• \u003cstrong\u003eHi Mids Switch:\u003c\/strong\u003e This switch change the center frequency of the Hi Mids from 3kHz to 1.5kHz.\u003cbr\u003e• \u003cstrong\u003eTreble:\u003c\/strong\u003e +-12dB at 5kHz\u003cbr\u003e• \u003cstrong\u003eParallel Output:\u003c\/strong\u003e A passthrough for your input signal, useful for parallel processing.\u003cbr\u003e• \u003cstrong\u003eDirect Output:\u003c\/strong\u003e A balanced version of the 1\/4\" output, useful for running into PA’s or studio mixing consoles.\u003cbr\u003e• \u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.72” × 4.21”\u003cbr\u003e• \u003cstrong\u003ePower:\u003c\/strong\u003e The Microtubes B7K v2 has a current draw of 30mA. Only use a regulated 9V DC adapter with a center-negative plug."}
Darkglass Microtubes B7K 2.0

Darkglass Microtubes B7K V2 Bass Preamp Pedal

$299.99

Microtubes B7K v2 - Analog Bass PreampWith the Microtubes B7K v2 you get all the features of the original, with the ability to better sculpture your tone: on the low mids you have the option to change the center frequency from 1KHz to 500Hz, and on the high mids you have the option to change the center frequency from 3kHz to 1.5kHz. This will en...


More Info
{"id":2021623169090,"title":"Darkglass Microtubes B3K V2 Bass Preamp Pedal","handle":"darkglass-microtubes-b3k-v2-bass-preamp-pedal","description":"Microtubes B3K v2 - CMOS Bass Overdrive\u003cbr\u003e\u003cbr\u003eWith the Microtubes B3K v2 you get all the features of the original, with the ability to restore the mids for natural character. The attack switch has been replaced by the tone knob, giving much more control of the higher harmonic content (3 kHz to 8 kHz). The grunt switch is still present, as you would expect. The addition comes in the form of a mid boost, giving you a subtle 6dB boost from 300 Hz to 1 kHz to help you cut through a bit more. \u003cbr\u003e\u003cbr\u003eFundamentally the Microtubes B3K is the same pedal we designed nearly a decade ago, aimed to give you a perfect combination of brutality and clarity. You can guarantee that this pedal will deliver defined and powerful saturation in an intuitive format.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eBlend:\u003c\/strong\u003e Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.\u003cbr\u003e• \u003cstrong\u003eTone:\u003c\/strong\u003e Controls the high frequency content of the sound. A variable low pass filter from 3kHz (ccw) to 8kHz (cw).\u003cbr\u003e• \u003cstrong\u003eLevel:\u003c\/strong\u003e Sets the volume of the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eDrive:\u003c\/strong\u003e Sets the amount of saturation in the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eGrunt:\u003c\/strong\u003e When engaged provides a massive low end boost to really thicken your sound.\u003cbr\u003e• \u003cstrong\u003eMid Boost:\u003c\/strong\u003e Gives a subtle 6dB boost from 300 Hz to 1kHz to help you cut through a bit more.\u003cbr\u003e• \u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.45” × 2.95”\u003cbr\u003e• \u003cstrong\u003ePower:\u003c\/strong\u003e The Microtubes B3K v2 has a current draw of 20mA. Only use a regulated 9V DC adapter with a center-negative plug.","published_at":"2019-09-02T08:35:43-04:00","created_at":"2019-09-02T08:35:43-04:00","vendor":"Darkglass","type":"Pedals and Effects","tags":["Brand_Darkglass","reverbsync-offers:off","reverbsync-shipping-profile:free 2 day","Type_Bass Guitar Effect Pedals"],"price":19999,"price_min":19999,"price_max":19999,"available":true,"price_varies":false,"compare_at_price":39999,"compare_at_price_min":39999,"compare_at_price_max":39999,"compare_at_price_varies":false,"variants":[{"id":16512245170242,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6430054580137","requires_shipping":true,"taxable":true,"featured_image":{"id":11807044927554,"product_id":2021623169090,"position":1,"created_at":"2019-09-02T08:35:43-04:00","updated_at":"2019-09-02T08:35:43-04:00","alt":"Darkglass Microtubes B3K 2.0","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MictubB3K-v2_01.jpg?v=1567427743","variant_ids":[16512245170242]},"available":true,"name":"Darkglass Microtubes B3K V2 Bass Preamp Pedal","public_title":null,"options":["Default Title"],"price":19999,"weight":0,"compare_at_price":39999,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6430054580137"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MictubB3K-v2_01.jpg?v=1567427743","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MictubB3K-v2_02.jpg?v=1567428780","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MictubB3K-v2_03.jpg?v=1567428782","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MictubB3K-v2_04.jpg?v=1567428784"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MictubB3K-v2_01.jpg?v=1567427743","options":["Title"],"content":"Microtubes B3K v2 - CMOS Bass Overdrive\u003cbr\u003e\u003cbr\u003eWith the Microtubes B3K v2 you get all the features of the original, with the ability to restore the mids for natural character. The attack switch has been replaced by the tone knob, giving much more control of the higher harmonic content (3 kHz to 8 kHz). The grunt switch is still present, as you would expect. The addition comes in the form of a mid boost, giving you a subtle 6dB boost from 300 Hz to 1 kHz to help you cut through a bit more. \u003cbr\u003e\u003cbr\u003eFundamentally the Microtubes B3K is the same pedal we designed nearly a decade ago, aimed to give you a perfect combination of brutality and clarity. You can guarantee that this pedal will deliver defined and powerful saturation in an intuitive format.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eBlend:\u003c\/strong\u003e Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.\u003cbr\u003e• \u003cstrong\u003eTone:\u003c\/strong\u003e Controls the high frequency content of the sound. A variable low pass filter from 3kHz (ccw) to 8kHz (cw).\u003cbr\u003e• \u003cstrong\u003eLevel:\u003c\/strong\u003e Sets the volume of the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eDrive:\u003c\/strong\u003e Sets the amount of saturation in the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eGrunt:\u003c\/strong\u003e When engaged provides a massive low end boost to really thicken your sound.\u003cbr\u003e• \u003cstrong\u003eMid Boost:\u003c\/strong\u003e Gives a subtle 6dB boost from 300 Hz to 1kHz to help you cut through a bit more.\u003cbr\u003e• \u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.45” × 2.95”\u003cbr\u003e• \u003cstrong\u003ePower:\u003c\/strong\u003e The Microtubes B3K v2 has a current draw of 20mA. Only use a regulated 9V DC adapter with a center-negative plug."}
Darkglass Microtubes B3K 2.0

Darkglass Microtubes B3K V2 Bass Preamp Pedal

$199.99

Microtubes B3K v2 - CMOS Bass OverdriveWith the Microtubes B3K v2 you get all the features of the original, with the ability to restore the mids for natural character. The attack switch has been replaced by the tone knob, giving much more control of the higher harmonic content (3 kHz to 8 kHz). The grunt switch is still present, as you would exp...


More Info
{"id":2021622906946,"title":"Darkglass IFS Intelligent Footswitch","handle":"darkglass-ifs-intelligent-footswitch","description":"Intelligent Footswitch - Accessory Footswitch for Darkglass Amplifiers\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe Perfect Match\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Intelligent Footswitch is an intuitive yet versatile accessory for Darkglass amplifiers. One tap will engage and disengage the Microtubes Engine, while holding for 3 seconds will Mute the amplifier. It is connected to the head via a standard 1\/4\" cable and it's powered by a microcontroller that sends commands to the head using a proprietary communication protocol.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003ePower on:\u003c\/strong\u003e Turns the amplifier on or off.\u003cbr\u003e• \u003cstrong\u003eMicrotubes:\u003c\/strong\u003e Engage and disengage the Microtubes Engine.\u003cbr\u003e• \u003cstrong\u003eMute:\u003c\/strong\u003e Mutes the amplifier for tuning or other purpose.\u003cbr\u003e• \u003cstrong\u003eDimensions (L x D x H):\u003c\/strong\u003e 2.7” x 2.9” x 1.9”\u003cbr\u003e• \u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 6.3oz","published_at":"2019-09-02T08:35:30-04:00","created_at":"2019-09-02T08:35:30-04:00","vendor":"Darkglass","type":"Amplifiers","tags":["Brand_Darkglass","reverbsync-offers:off","reverbsync-shipping-profile:395","Type_Bass Guitar Effect Pedals","Type_Footswitch Pedals"],"price":3999,"price_min":3999,"price_max":3999,"available":true,"price_varies":false,"compare_at_price":5599,"compare_at_price_min":5599,"compare_at_price_max":5599,"compare_at_price_varies":false,"variants":[{"id":16512244318274,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6430054580151","requires_shipping":true,"taxable":true,"featured_image":{"id":11807044304962,"product_id":2021622906946,"position":1,"created_at":"2019-09-02T08:35:30-04:00","updated_at":"2019-09-02T08:35:30-04:00","alt":"Darkglass IFS Footswitch","width":856,"height":856,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_Intelligent_FS_01.jpg?v=1567427730","variant_ids":[16512244318274]},"available":true,"name":"Darkglass IFS Intelligent Footswitch","public_title":null,"options":["Default Title"],"price":3999,"weight":0,"compare_at_price":5599,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6430054580151"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_Intelligent_FS_01.jpg?v=1567427730","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_Intelligent_FS_02.jpg?v=1567428455","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_Intelligent_FS_03.jpg?v=1567428457"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_Intelligent_FS_01.jpg?v=1567427730","options":["Title"],"content":"Intelligent Footswitch - Accessory Footswitch for Darkglass Amplifiers\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe Perfect Match\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Intelligent Footswitch is an intuitive yet versatile accessory for Darkglass amplifiers. One tap will engage and disengage the Microtubes Engine, while holding for 3 seconds will Mute the amplifier. It is connected to the head via a standard 1\/4\" cable and it's powered by a microcontroller that sends commands to the head using a proprietary communication protocol.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003ePower on:\u003c\/strong\u003e Turns the amplifier on or off.\u003cbr\u003e• \u003cstrong\u003eMicrotubes:\u003c\/strong\u003e Engage and disengage the Microtubes Engine.\u003cbr\u003e• \u003cstrong\u003eMute:\u003c\/strong\u003e Mutes the amplifier for tuning or other purpose.\u003cbr\u003e• \u003cstrong\u003eDimensions (L x D x H):\u003c\/strong\u003e 2.7” x 2.9” x 1.9”\u003cbr\u003e• \u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 6.3oz"}
Darkglass IFS Footswitch

Darkglass IFS Intelligent Footswitch

$39.99

Intelligent Footswitch - Accessory Footswitch for Darkglass AmplifiersThe Perfect MatchThe Intelligent Footswitch is an intuitive yet versatile accessory for Darkglass amplifiers. One tap will engage and disengage the Microtubes Engine, while holding for 3 seconds will Mute the amplifier. It is connected to the head via a standard 1/4" cable and...


More Info
{"id":2021622841410,"title":"Darkglass Hyper Luminal Bass Compressor Pedal","handle":"darkglass-hyper-luminal-bass-compressor-pedal","description":"Hyper Luminal - Hybrid Compressor\u003cbr\u003e\u003cbr\u003eThe Hyper Luminal Compressor features the first hybrid design in a compressor pedal: an analog VCA controlled by a digital side-chain allowed us to capture and include the characters of some of the most legendary compressors in history while keeping the signal path completely analog.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eBlend:\u003c\/strong\u003e Mixes the clean and effected signals. Unlike Darkglass distortions, it is placed before the Output control. So the Hyper Luminal can also be used as a transparent booster with this control at minimum.\u003cbr\u003e• \u003cstrong\u003eTime:\u003c\/strong\u003e Sets the time constants (Attack and Release). You can use the Darkglass Suite to fine tune and custom map the time constants, you can also assign different behaviours for each Mode.\u003cbr\u003e• \u003cstrong\u003eOutput:\u003c\/strong\u003e Sets the overall output volume of the unit.\u003cbr\u003e• \u003cstrong\u003eCompression:\u003c\/strong\u003e Sets the overall amount of compression. This control also affects the internal makeup gain.\u003cbr\u003e• \u003cstrong\u003eRatio:\u003c\/strong\u003e Adjusts the amount of compression.\u003cbr\u003e• \u003cstrong\u003eMode:\u003c\/strong\u003e Selects the unit's Mode (BUS, FET, or SYM)\u003cbr\u003e• \u003cstrong\u003eUSB:\u003c\/strong\u003e A Micro USB B connector allows you to connect the pedal to PC\/Mac to set Time settings, parameters, and future firmware upgrades via the Darkglass Suite.\u003cbr\u003e• \u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.95” x 4.37” x 1.77”\u003cbr\u003e• \u003cstrong\u003ePower:\u003c\/strong\u003e The Hyper Luminal Hybrid Compressor has a current draw of 250mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons, it does not accept batteries","published_at":"2019-09-02T08:35:26-04:00","created_at":"2019-09-02T08:35:26-04:00","vendor":"Darkglass","type":"Pedals and Effects","tags":["Brand_Darkglass","reverbsync-offers:off","reverbsync-shipping-profile:free 2 day","Type_Bass Guitar Effect Pedals"],"price":24999,"price_min":24999,"price_max":24999,"available":true,"price_varies":false,"compare_at_price":34999,"compare_at_price_min":34999,"compare_at_price_max":34999,"compare_at_price_varies":false,"variants":[{"id":16512244252738,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6430054580267","requires_shipping":true,"taxable":true,"featured_image":{"id":11807043977282,"product_id":2021622841410,"position":1,"created_at":"2019-09-02T08:35:26-04:00","updated_at":"2019-09-02T08:35:26-04:00","alt":"Darkglass Hyper Luminal Comp","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_HypLumComp_01.jpg?v=1567427726","variant_ids":[16512244252738]},"available":true,"name":"Darkglass Hyper Luminal Bass Compressor Pedal","public_title":null,"options":["Default Title"],"price":24999,"weight":0,"compare_at_price":34999,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6430054580267"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_HypLumComp_01.jpg?v=1567427726","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_HypLumComp_02.jpg?v=1567428403","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_HypLumComp_03.jpg?v=1567428406","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_HypLumComp_04.jpg?v=1567428407","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_HypLumComp_05.jpg?v=1567428410"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_HypLumComp_01.jpg?v=1567427726","options":["Title"],"content":"Hyper Luminal - Hybrid Compressor\u003cbr\u003e\u003cbr\u003eThe Hyper Luminal Compressor features the first hybrid design in a compressor pedal: an analog VCA controlled by a digital side-chain allowed us to capture and include the characters of some of the most legendary compressors in history while keeping the signal path completely analog.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eBlend:\u003c\/strong\u003e Mixes the clean and effected signals. Unlike Darkglass distortions, it is placed before the Output control. So the Hyper Luminal can also be used as a transparent booster with this control at minimum.\u003cbr\u003e• \u003cstrong\u003eTime:\u003c\/strong\u003e Sets the time constants (Attack and Release). You can use the Darkglass Suite to fine tune and custom map the time constants, you can also assign different behaviours for each Mode.\u003cbr\u003e• \u003cstrong\u003eOutput:\u003c\/strong\u003e Sets the overall output volume of the unit.\u003cbr\u003e• \u003cstrong\u003eCompression:\u003c\/strong\u003e Sets the overall amount of compression. This control also affects the internal makeup gain.\u003cbr\u003e• \u003cstrong\u003eRatio:\u003c\/strong\u003e Adjusts the amount of compression.\u003cbr\u003e• \u003cstrong\u003eMode:\u003c\/strong\u003e Selects the unit's Mode (BUS, FET, or SYM)\u003cbr\u003e• \u003cstrong\u003eUSB:\u003c\/strong\u003e A Micro USB B connector allows you to connect the pedal to PC\/Mac to set Time settings, parameters, and future firmware upgrades via the Darkglass Suite.\u003cbr\u003e• \u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.95” x 4.37” x 1.77”\u003cbr\u003e• \u003cstrong\u003ePower:\u003c\/strong\u003e The Hyper Luminal Hybrid Compressor has a current draw of 250mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons, it does not accept batteries"}
Darkglass Hyper Luminal Comp

Darkglass Hyper Luminal Bass Compressor Pedal

$249.99

Hyper Luminal - Hybrid CompressorThe Hyper Luminal Compressor features the first hybrid design in a compressor pedal: an analog VCA controlled by a digital side-chain allowed us to capture and include the characters of some of the most legendary compressors in history while keeping the signal path completely analog.Features• Blend: Mixes the cle...


More Info
{"id":2021622775874,"title":"Darkglass DFZ Duality Bass Fuzz Pedal","handle":"darkglass-dfz-duality-fuzz","description":"Duality - Dual Fuzz Engine\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe Siamese Twins\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Duality is a unique fuzz pedal that contains two discrete fuzz circuits—a gated saw-tooth wave and a raunchy high-gain sound—which can be mixed together to yield a vast selection of distinct sonic textures.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eLevel:\u003c\/strong\u003e Sets the volume of the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eFilter:\u003c\/strong\u003e Controls the amount of high frequency content in the fuzz signal.\u003cbr\u003e• \u003cstrong\u003eBlend:\u003c\/strong\u003e Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.\u003cbr\u003e• \u003cstrong\u003eDuality:\u003c\/strong\u003e Mixes two discrete fuzz circuits. Set it at minimum for a pure gated saw-tooth wave, or crank it up for a tighter high gain fuzz.\u003cbr\u003e• \u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.45\" × 2.95\"\u003cbr\u003e• \u003cstrong\u003ePower:\u003c\/strong\u003e The Duality has a current draw of 20mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons it does not accept batteries.","published_at":"2019-09-02T08:35:21-04:00","created_at":"2019-09-02T08:35:21-04:00","vendor":"Darkglass","type":"Pedals and Effects","tags":["Brand_Darkglass","reverbsync-offers:off","reverbsync-shipping-profile:free 2 day","Type_Bass Guitar Effect Pedals"],"price":19999,"price_min":19999,"price_max":19999,"available":true,"price_varies":false,"compare_at_price":27999,"compare_at_price_min":27999,"compare_at_price_max":27999,"compare_at_price_varies":false,"variants":[{"id":16512244023362,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"0881314190591","requires_shipping":true,"taxable":true,"featured_image":{"id":11807043780674,"product_id":2021622775874,"position":1,"created_at":"2019-09-02T08:35:21-04:00","updated_at":"2019-09-02T08:35:21-04:00","alt":"Darkglass DFZ Duality Fuzz","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_DualityFuzz_01.jpg?v=1567427721","variant_ids":[16512244023362]},"available":true,"name":"Darkglass DFZ Duality Bass Fuzz Pedal","public_title":null,"options":["Default Title"],"price":19999,"weight":0,"compare_at_price":27999,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"0881314190591"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_DualityFuzz_01.jpg?v=1567427721","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_DualityFuzz_02.jpg?v=1567428191"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_DualityFuzz_01.jpg?v=1567427721","options":["Title"],"content":"Duality - Dual Fuzz Engine\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe Siamese Twins\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Duality is a unique fuzz pedal that contains two discrete fuzz circuits—a gated saw-tooth wave and a raunchy high-gain sound—which can be mixed together to yield a vast selection of distinct sonic textures.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eLevel:\u003c\/strong\u003e Sets the volume of the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eFilter:\u003c\/strong\u003e Controls the amount of high frequency content in the fuzz signal.\u003cbr\u003e• \u003cstrong\u003eBlend:\u003c\/strong\u003e Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.\u003cbr\u003e• \u003cstrong\u003eDuality:\u003c\/strong\u003e Mixes two discrete fuzz circuits. Set it at minimum for a pure gated saw-tooth wave, or crank it up for a tighter high gain fuzz.\u003cbr\u003e• \u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.45\" × 2.95\"\u003cbr\u003e• \u003cstrong\u003ePower:\u003c\/strong\u003e The Duality has a current draw of 20mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons it does not accept batteries."}
Darkglass DFZ Duality Fuzz

Darkglass DFZ Duality Bass Fuzz Pedal

$199.99

Duality - Dual Fuzz EngineThe Siamese TwinsThe Duality is a unique fuzz pedal that contains two discrete fuzz circuits—a gated saw-tooth wave and a raunchy high-gain sound—which can be mixed together to yield a vast selection of distinct sonic textures.Features:• Level: Sets the volume of the overdriven signal.• Filter: Controls the amount of hi...


More Info
{"id":2021622677570,"title":"Darkglass Alpha Omicron Bass Preamp\/OD Pedal","handle":"darkglass-alpha-omicron-bass-preamp-od-pedal","description":"Alpha Omicron - Bass Preamp\/Overdrive Pedal\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBeautifully Brutal\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eWith the double distortion engine (Alpha and Omega), the Alpha·Omicron delivers unparalleled versatility, harmonic rich and bone-crushing sound. Designed for bassists in need of a preamplifier to be distinctively heard in any musical context.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eBlend:\u003c\/strong\u003e Mixes the clean and processed signals. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine mix tuning.\u003cbr\u003e• \u003cstrong\u003eLevel:\u003c\/strong\u003e Sets the volume of the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eDrive:\u003c\/strong\u003e Sets the amount of gain in the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eMod:\u003c\/strong\u003e Selects or mixes between the two distinct distortion circuits: Alpha is punchy, tight with a lot of definition, whereas Omega is simply brutal and raw.\u003cbr\u003e• \u003cstrong\u003eBite Switch:\u003c\/strong\u003e Boosts High Mids (2.8kHz) for additional presence and definition.\u003cbr\u003e• \u003cstrong\u003eGrowl Switch:\u003c\/strong\u003e Shelving Bass Boost for a fatter tone and increased low end saturation.\u003cbr\u003e• \u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.5” × 2.95”\u003cbr\u003e• \u003cstrong\u003ePower:\u003c\/strong\u003e The Alpha-Omicron has a current draw of 20mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons it does not accept batteries","published_at":"2019-09-02T08:35:16-04:00","created_at":"2019-09-02T08:35:16-04:00","vendor":"Darkglass","type":"Pedals and Effects","tags":["Brand_Darkglass","reverbsync-offers:off","reverbsync-shipping-profile:free 2 day","Type_Bass Guitar Effect Pedals"],"price":19999,"price_min":19999,"price_max":19999,"available":true,"price_varies":false,"compare_at_price":27999,"compare_at_price_min":27999,"compare_at_price_max":27999,"compare_at_price_varies":false,"variants":[{"id":16512243892290,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6430054580076","requires_shipping":true,"taxable":true,"featured_image":{"id":11807043354690,"product_id":2021622677570,"position":1,"created_at":"2019-09-02T08:35:17-04:00","updated_at":"2019-09-02T08:35:17-04:00","alt":"Darkglass AOM Alpha Omicron","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphaOmicron_01.jpg?v=1567427717","variant_ids":[16512243892290]},"available":true,"name":"Darkglass Alpha Omicron Bass Preamp\/OD Pedal","public_title":null,"options":["Default Title"],"price":19999,"weight":0,"compare_at_price":27999,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6430054580076"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphaOmicron_01.jpg?v=1567427717","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphaOmicron_02.jpg?v=1567428033","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphaOmicron_03.jpg?v=1567428035","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphaOmicron_04.jpg?v=1567428037"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphaOmicron_01.jpg?v=1567427717","options":["Title"],"content":"Alpha Omicron - Bass Preamp\/Overdrive Pedal\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBeautifully Brutal\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eWith the double distortion engine (Alpha and Omega), the Alpha·Omicron delivers unparalleled versatility, harmonic rich and bone-crushing sound. Designed for bassists in need of a preamplifier to be distinctively heard in any musical context.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eBlend:\u003c\/strong\u003e Mixes the clean and processed signals. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine mix tuning.\u003cbr\u003e• \u003cstrong\u003eLevel:\u003c\/strong\u003e Sets the volume of the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eDrive:\u003c\/strong\u003e Sets the amount of gain in the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eMod:\u003c\/strong\u003e Selects or mixes between the two distinct distortion circuits: Alpha is punchy, tight with a lot of definition, whereas Omega is simply brutal and raw.\u003cbr\u003e• \u003cstrong\u003eBite Switch:\u003c\/strong\u003e Boosts High Mids (2.8kHz) for additional presence and definition.\u003cbr\u003e• \u003cstrong\u003eGrowl Switch:\u003c\/strong\u003e Shelving Bass Boost for a fatter tone and increased low end saturation.\u003cbr\u003e• \u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.5” × 2.95”\u003cbr\u003e• \u003cstrong\u003ePower:\u003c\/strong\u003e The Alpha-Omicron has a current draw of 20mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons it does not accept batteries"}
Darkglass AOM Alpha Omicron

Darkglass Alpha Omicron Bass Preamp/OD Pedal

$199.99

Alpha Omicron - Bass Preamp/Overdrive PedalBeautifully BrutalWith the double distortion engine (Alpha and Omega), the Alpha·Omicron delivers unparalleled versatility, harmonic rich and bone-crushing sound. Designed for bassists in need of a preamplifier to be distinctively heard in any musical context.Features• Blend: Mixes the clean and proces...


More Info
{"id":2021622546498,"title":"Darkglass Alpha Omega Dual Bass Preamp\/OD Pedal","handle":"darkglass-alpha-omega-dual-bass-preamp-od-pedal","description":"Alpha Omega - Bass Preamp\/Overdrive Pedal\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe Beginning and the End\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBesides being an amazing composer, producer and bassist, Jon Stockman is amazing at crafting some of the most devastating bass tones in the world. Darkglass got together in their then Helsinki headquarters 18 months ago and after endless tweaking and tens of prototypes they are finally ready to announce their first co-designed creation: Alpha-Omega.\u003cbr\u003e\u003cbr\u003eThis creation differs greatly from their previous preamplifiers and overdrives: it is fully operational amplifier based and has two distinct distortion circuits (Alpha and Omega) which can be selected or blended using the Mod knob. This unusual control, in conjunction with the toggle switches and 3 active band equilizer makes Alpha - Omega the most flexible among otheir designs.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eBlend:\u003c\/strong\u003e Mixes the clean and processed signals. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine mix tuning.\u003cbr\u003e• \u003cstrong\u003eLevel:\u003c\/strong\u003e Sets the volume of the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eDrive:\u003c\/strong\u003e Sets the amount of gain in the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eBite:\u003c\/strong\u003e Boosts High Mids (2.8kHz) for additional presence and definition.\u003cbr\u003e• \u003cstrong\u003eGrowl:\u003c\/strong\u003e Shelving Bass Boost for a fatter tone and increased low end saturation.\u003cbr\u003e• \u003cstrong\u003eMod:\u003c\/strong\u003e Selects or mixes between the two distinct distortion circuits: Alpha is punchy, tight with a lot of definition, whereas Omega is simply brutal and raw.\u003cbr\u003e• \u003cstrong\u003eBass:\u003c\/strong\u003e +-12dB at 80Hz\u003cbr\u003e• \u003cstrong\u003eMid:\u003c\/strong\u003e +-12dB at 500Hz\u003cbr\u003e• \u003cstrong\u003eTreble:\u003c\/strong\u003e +-12dB at 5kHz\u003cbr\u003e• \u003cstrong\u003eParallel Output:\u003c\/strong\u003e Hardwired copy of your input signal, useful for getting a clean signal in recording and live situations\u003cbr\u003e• \u003cstrong\u003eDirect Output:\u003c\/strong\u003e A balanced version of the ¼” output, useful for running into PA’s or studio mixing consoles.\u003cbr\u003e• \u003cstrong\u003eDIMENSIONS:\u003c\/strong\u003e 4.72” × 4.21”\u003cbr\u003e• \u003cstrong\u003ePOWER:\u003c\/strong\u003e The Alpha-Omega has a current draw of 30mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons it does not accept batteries","published_at":"2019-09-02T08:35:11-04:00","created_at":"2019-09-02T08:35:12-04:00","vendor":"Darkglass","type":"Pedals and Effects","tags":["Brand_Darkglass","reverbsync-offers:off","reverbsync-shipping-profile:free 2 day","Type_Bass Guitar Effect Pedals"],"price":29999,"price_min":29999,"price_max":29999,"available":true,"price_varies":false,"compare_at_price":41999,"compare_at_price_min":41999,"compare_at_price_max":41999,"compare_at_price_varies":false,"variants":[{"id":16512243695682,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6430054580045","requires_shipping":true,"taxable":true,"featured_image":{"id":11807042928706,"product_id":2021622546498,"position":1,"created_at":"2019-09-02T08:35:12-04:00","updated_at":"2019-09-02T08:35:12-04:00","alt":"Darkglass AO Alpha Omega","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphaOmega_01.jpg?v=1567427712","variant_ids":[16512243695682]},"available":true,"name":"Darkglass Alpha Omega Dual Bass Preamp\/OD Pedal","public_title":null,"options":["Default Title"],"price":29999,"weight":0,"compare_at_price":41999,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6430054580045"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphaOmega_01.jpg?v=1567427712","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphaOmega_02.jpg?v=1567427919","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphaOmega_03.jpg?v=1567427921","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphaOmega_04.jpg?v=1567427924","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphaOmega_05.jpg?v=1567427926"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphaOmega_01.jpg?v=1567427712","options":["Title"],"content":"Alpha Omega - Bass Preamp\/Overdrive Pedal\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe Beginning and the End\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBesides being an amazing composer, producer and bassist, Jon Stockman is amazing at crafting some of the most devastating bass tones in the world. Darkglass got together in their then Helsinki headquarters 18 months ago and after endless tweaking and tens of prototypes they are finally ready to announce their first co-designed creation: Alpha-Omega.\u003cbr\u003e\u003cbr\u003eThis creation differs greatly from their previous preamplifiers and overdrives: it is fully operational amplifier based and has two distinct distortion circuits (Alpha and Omega) which can be selected or blended using the Mod knob. This unusual control, in conjunction with the toggle switches and 3 active band equilizer makes Alpha - Omega the most flexible among otheir designs.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eBlend:\u003c\/strong\u003e Mixes the clean and processed signals. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine mix tuning.\u003cbr\u003e• \u003cstrong\u003eLevel:\u003c\/strong\u003e Sets the volume of the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eDrive:\u003c\/strong\u003e Sets the amount of gain in the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eBite:\u003c\/strong\u003e Boosts High Mids (2.8kHz) for additional presence and definition.\u003cbr\u003e• \u003cstrong\u003eGrowl:\u003c\/strong\u003e Shelving Bass Boost for a fatter tone and increased low end saturation.\u003cbr\u003e• \u003cstrong\u003eMod:\u003c\/strong\u003e Selects or mixes between the two distinct distortion circuits: Alpha is punchy, tight with a lot of definition, whereas Omega is simply brutal and raw.\u003cbr\u003e• \u003cstrong\u003eBass:\u003c\/strong\u003e +-12dB at 80Hz\u003cbr\u003e• \u003cstrong\u003eMid:\u003c\/strong\u003e +-12dB at 500Hz\u003cbr\u003e• \u003cstrong\u003eTreble:\u003c\/strong\u003e +-12dB at 5kHz\u003cbr\u003e• \u003cstrong\u003eParallel Output:\u003c\/strong\u003e Hardwired copy of your input signal, useful for getting a clean signal in recording and live situations\u003cbr\u003e• \u003cstrong\u003eDirect Output:\u003c\/strong\u003e A balanced version of the ¼” output, useful for running into PA’s or studio mixing consoles.\u003cbr\u003e• \u003cstrong\u003eDIMENSIONS:\u003c\/strong\u003e 4.72” × 4.21”\u003cbr\u003e• \u003cstrong\u003ePOWER:\u003c\/strong\u003e The Alpha-Omega has a current draw of 30mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons it does not accept batteries"}
Darkglass AO Alpha Omega

Darkglass Alpha Omega Dual Bass Preamp/OD Pedal

$299.99

Alpha Omega - Bass Preamp/Overdrive PedalThe Beginning and the EndBesides being an amazing composer, producer and bassist, Jon Stockman is amazing at crafting some of the most devastating bass tones in the world. Darkglass got together in their then Helsinki headquarters 18 months ago and after endless tweaking and tens of prototypes they are fi...


More Info
{"id":2021622480962,"title":"Darkglass Alpha Omega Ultra Dual Bass Preamp\/OD Pedal","handle":"darkglass-alpha-omega-ultra-dual-bass-preamp-od-pedal","description":"Alpha Omega Ultra - Bass Preamp\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAnalog tone, digital precision\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Alpha Omega Ultra is the most versatile bass preamplifier Darkglass has designed: With its two distinct distortion circuits (Alpha and Omega), extremely high dynamic range, six-band active graphic EQ, dedicated headphone output and balanced direct output with switchable digital impulse-response cabinet emulation make for an incredibly complete tool for the modern bass player. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eBlend:\u003c\/strong\u003e Mixes the clean and processed signals. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine mix tuning.\u003cbr\u003e• \u003cstrong\u003eLevel:\u003c\/strong\u003e Sets the volume of the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eDrive:\u003c\/strong\u003e Sets the amount of gain in the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eBite:\u003c\/strong\u003e Boosts High Mids (2.8kHz) for additional presence and definition.\u003cbr\u003e• \u003cstrong\u003eGrowl:\u003c\/strong\u003e Shelving Bass Boost for a fatter tone and increased low end saturation.\u003cbr\u003e• \u003cstrong\u003eMod:\u003c\/strong\u003e Selects or mixes between the two distinct distortion circuits: Alpha is punchy, tight with a lot of definition, whereas Omega is simply brutal and raw. On the Darkglass Suite you can assign footswitch control of the Mod to toggle between Alpha and Omega.\u003cbr\u003e• \u003cstrong\u003eMaster:\u003c\/strong\u003e Whereas the Level knob control the output of the overdrive section the Master volume adjusts the overall volume of the unit. Ideal for fine tuning the output on clean mode. It also serves as a DI and headphone volume control. Please note that volume is not affected by this control when the pedal is on bypass.\u003cbr\u003e• \u003cstrong\u003eBass:\u003c\/strong\u003e Low shelf +-12dB at 80 Hz\u003cbr\u003e• \u003cstrong\u003eMid bands:\u003c\/strong\u003e +-10dB at 250 Hz, 500 Hz, 1.5 kHz, 3 kHz\u003cbr\u003e• \u003cstrong\u003eTreble:\u003c\/strong\u003e High shelf +-12dB at 5 kHz\u003cbr\u003e• \u003cstrong\u003eGround lift:\u003c\/strong\u003e Disconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the ¼” output.\u003cbr\u003e• \u003cstrong\u003eCab Sim:\u003c\/strong\u003e Toggle the cabinet simulation on\/off on the Direct Output. This switch completely bypasses all digital circuits and allows you to get a zero latency signal when needed.\u003cbr\u003e• \u003cstrong\u003eHeadphones:\u003c\/strong\u003e Alpha Omega Ultra has an internal stereo headphone amplifier capable of driving a minimum load of 16 ohms from the 3.5mm stereo jack. Use the Master volume control to adjust the level.\u003cbr\u003e• \u003cstrong\u003eUSB:\u003c\/strong\u003e A Micro USB B connector allows you to connect the pedal to PC\/Mac to load cabinet simulation impulse responses to the pedal and control various other settings.\u003cbr\u003e• \u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.92\" x 3.77\" x 2.24\"\u003cbr\u003e• \u003cstrong\u003ePower:\u003c\/strong\u003e The Alpha Omega Ultra has a current draw of 110mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons, it does not accept batteries.","published_at":"2019-09-02T08:35:07-04:00","created_at":"2019-09-02T08:35:07-04:00","vendor":"Darkglass","type":"Pedals and Effects","tags":["Brand_Darkglass","reverbsync-force:on","reverbsync-offers:off","reverbsync-shipping-profile:free 2 day","Type_Bass Guitar Effect Pedals"],"price":39999,"price_min":39999,"price_max":39999,"available":true,"price_varies":false,"compare_at_price":55999,"compare_at_price_min":55999,"compare_at_price_max":55999,"compare_at_price_varies":false,"variants":[{"id":16512243662914,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6430054580182","requires_shipping":true,"taxable":true,"featured_image":{"id":11807042601026,"product_id":2021622480962,"position":1,"created_at":"2019-09-02T08:35:07-04:00","updated_at":"2019-09-02T08:35:07-04:00","alt":"Darkglass Alpha Omega Ultra","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphOmegUltra_01.jpg?v=1567427707","variant_ids":[16512243662914]},"available":true,"name":"Darkglass Alpha Omega Ultra Dual Bass Preamp\/OD Pedal","public_title":null,"options":["Default Title"],"price":39999,"weight":0,"compare_at_price":55999,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6430054580182"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphOmegUltra_01.jpg?v=1567427707","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphOmegUltra_02.jpg?v=1567427972","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphOmegUltra_03.jpg?v=1567427973","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphOmegUltra_04.jpg?v=1567427974","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphOmegUltra_05.jpg?v=1567427976","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphOmegUltra_06.jpg?v=1567427977"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphOmegUltra_01.jpg?v=1567427707","options":["Title"],"content":"Alpha Omega Ultra - Bass Preamp\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAnalog tone, digital precision\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Alpha Omega Ultra is the most versatile bass preamplifier Darkglass has designed: With its two distinct distortion circuits (Alpha and Omega), extremely high dynamic range, six-band active graphic EQ, dedicated headphone output and balanced direct output with switchable digital impulse-response cabinet emulation make for an incredibly complete tool for the modern bass player. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eBlend:\u003c\/strong\u003e Mixes the clean and processed signals. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine mix tuning.\u003cbr\u003e• \u003cstrong\u003eLevel:\u003c\/strong\u003e Sets the volume of the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eDrive:\u003c\/strong\u003e Sets the amount of gain in the overdriven signal.\u003cbr\u003e• \u003cstrong\u003eBite:\u003c\/strong\u003e Boosts High Mids (2.8kHz) for additional presence and definition.\u003cbr\u003e• \u003cstrong\u003eGrowl:\u003c\/strong\u003e Shelving Bass Boost for a fatter tone and increased low end saturation.\u003cbr\u003e• \u003cstrong\u003eMod:\u003c\/strong\u003e Selects or mixes between the two distinct distortion circuits: Alpha is punchy, tight with a lot of definition, whereas Omega is simply brutal and raw. On the Darkglass Suite you can assign footswitch control of the Mod to toggle between Alpha and Omega.\u003cbr\u003e• \u003cstrong\u003eMaster:\u003c\/strong\u003e Whereas the Level knob control the output of the overdrive section the Master volume adjusts the overall volume of the unit. Ideal for fine tuning the output on clean mode. It also serves as a DI and headphone volume control. Please note that volume is not affected by this control when the pedal is on bypass.\u003cbr\u003e• \u003cstrong\u003eBass:\u003c\/strong\u003e Low shelf +-12dB at 80 Hz\u003cbr\u003e• \u003cstrong\u003eMid bands:\u003c\/strong\u003e +-10dB at 250 Hz, 500 Hz, 1.5 kHz, 3 kHz\u003cbr\u003e• \u003cstrong\u003eTreble:\u003c\/strong\u003e High shelf +-12dB at 5 kHz\u003cbr\u003e• \u003cstrong\u003eGround lift:\u003c\/strong\u003e Disconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the ¼” output.\u003cbr\u003e• \u003cstrong\u003eCab Sim:\u003c\/strong\u003e Toggle the cabinet simulation on\/off on the Direct Output. This switch completely bypasses all digital circuits and allows you to get a zero latency signal when needed.\u003cbr\u003e• \u003cstrong\u003eHeadphones:\u003c\/strong\u003e Alpha Omega Ultra has an internal stereo headphone amplifier capable of driving a minimum load of 16 ohms from the 3.5mm stereo jack. Use the Master volume control to adjust the level.\u003cbr\u003e• \u003cstrong\u003eUSB:\u003c\/strong\u003e A Micro USB B connector allows you to connect the pedal to PC\/Mac to load cabinet simulation impulse responses to the pedal and control various other settings.\u003cbr\u003e• \u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.92\" x 3.77\" x 2.24\"\u003cbr\u003e• \u003cstrong\u003ePower:\u003c\/strong\u003e The Alpha Omega Ultra has a current draw of 110mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons, it does not accept batteries."}
Darkglass Alpha Omega Ultra

Darkglass Alpha Omega Ultra Dual Bass Preamp/OD Pedal

$399.99

Alpha Omega Ultra - Bass PreampAnalog tone, digital precisionThe Alpha Omega Ultra is the most versatile bass preamplifier Darkglass has designed: With its two distinct distortion circuits (Alpha and Omega), extremely high dynamic range, six-band active graphic EQ, dedicated headphone output and balanced direct output with switchable digital imp...


More Info
{"id":2021622415426,"title":"Darkglass Alpha-Omega 900 - 900-watt Bass Head","handle":"darkglass-alpha-omega-900-900-watt-bass-head","description":"Alpha Omega - 900 Watt Solid State Bass Guitar Amplifier Head\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBeautifully Brutal\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Alpha Omega 900 takes the best elements of ourthe Darkglass most successful distortion preamplifier ever, combined with state of the art features to make a monstrous 900-watt amplifier with earth-shattering tone. While the Darkglass signature Alpha and Omega drive engines add incredible girth and size to the overdriven signal, the studio-grade VCA compressor adds an extra layer of control, and the ultra-quiet 6-band graphic equalizer can help sculpt the tone from aggressive and overdriven to crystal clear clean, whatever your needs may be. \u003cbr\u003e\u003cbr\u003eThat's not everything though, the MIDI programmability and impulse response cabinet simulation with up to three different storable virtual cabinets make the AO900 not only one of the most complete amplifiers for the touring musician but combined with the auxiliary input and headphone output, the ideal tool for silent practicing. \u003cbr\u003e\u003cbr\u003eThe Alpha Omega 900 amplifies the best qualities of one of the most powerful and distinct Darkglass products ever made.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFront Panel Features:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eActive\/Passive:\u003c\/strong\u003e Use this push-button switch to change from passive to active mode. If your bass is active it can have a hotter signal making the amp to distort early (feel free to use if such additional distortion is desired).\u003cbr\u003e• \u003cstrong\u003eDistortion:\u003c\/strong\u003e Use this push button to turn on or off the Alpha-Omega Engine to add natural compression, organic harmonic enhancement, and saturation ranging from mild overdrive to high gain bass rage. The Alpha-Omega Engine operates before the clean section (you can therefore use the 6-Band Active EQ for additional tone shaping).\u003cbr\u003e• \u003cstrong\u003eBite:\u003c\/strong\u003e Boosts high mids (2.8kHz) for additional presence and definition.\u003cbr\u003e• \u003cstrong\u003eGrowl:\u003c\/strong\u003e Shelving Bass Boost for a fatter tone and increased low end saturation.\u003cbr\u003e• \u003cstrong\u003eCompression:\u003c\/strong\u003e This knob controls the amount of dynamic compression added to the Alpha-Omega Engine. The make-up gain is adjusted automatically. The compression can be turned off or assigned using the Darkglass Suite software.\u003cbr\u003e• \u003cstrong\u003eDrive:\u003c\/strong\u003e This knob controls the amount of distortion that the Alpha-Omega Engine will deliver. It will change from a soft, warm overdrive to a massive and modern distortion sound.\u003cbr\u003e• \u003cstrong\u003eLevel:\u003c\/strong\u003e Use this knob to control Alpha-Omega Engine’s output volume.\u003cbr\u003e• \u003cstrong\u003eBlend:\u003c\/strong\u003e Use this knob to mix between the Clean signal and the Distortion signal (Alpha-Omega Engine).\u003cbr\u003e• \u003cstrong\u003eMod:\u003c\/strong\u003e Selects or mixes between the two distinct distortion circuits: Alpha is punchy, tight with a lot of definition, whereas Omega is simply brutal and raw.\u003cbr\u003e• \u003cstrong\u003eGain:\u003c\/strong\u003e Use this knob to change the volume of the signal before the Active 6 Band EQ. You can set it low for ensuring the cleanest operation possible or set it higher for a more aggressive growl.\u003cbr\u003e• \u003cstrong\u003eBass:\u003c\/strong\u003e +-12dB at 80Hz. \u003cbr\u003e• \u003cstrong\u003eMids:\u003c\/strong\u003e +-12dB at 250, 500, 1.5K and 3Khz. \u003cbr\u003e• \u003cstrong\u003eTreble:\u003c\/strong\u003e +-12dB at 5kHz.\u003cbr\u003e• \u003cstrong\u003eMaster:\u003c\/strong\u003e Use this knob to control the overall volume of the amplifier.\u003cbr\u003e• \u003cstrong\u003eDimensions (L x H x W):\u003c\/strong\u003e 10.5” x 2.75” x 10” \u003cbr\u003e• \u003cstrong\u003eWeight:\u003c\/strong\u003e 6.39Lbs\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBack Panel Features:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eSpeaker Output:\u003c\/strong\u003e Use this connector to connect the amplifier to your cabinet. This Speakon combo jack allows for either Speakon or 1\/4” speaker cable operation. The outputs are connected in parallel. \u003cbr\u003e• \u003cstrong\u003eSend:\u003c\/strong\u003e Use this output to send the signal to effects pedals.\u003cbr\u003e• \u003cstrong\u003eReturn:\u003c\/strong\u003e Use this input to receive the signal from effects pedals. Master volume control is after this input.\u003cbr\u003e• \u003cstrong\u003ePre DI Output:\u003c\/strong\u003e Use this output to send a balanced copy of your input signal to recording equipment, mixer etc. The output is latency compensated to match with the Post DI Output\u003cbr\u003e• \u003cstrong\u003ePost DI Output:\u003c\/strong\u003e The signal for this output is taken after the distortion, EQ and effects loop, and processed through the cabinet simulation engine. The output is latency compensated with the Pre DI Output, and not affected by the master volume.\u003cbr\u003e• \u003cstrong\u003eUSB:\u003c\/strong\u003e The USB connector allows you to use the Darkglass Suite software to load different cabinet impulses or change different parameters on your amp (midi, compressor, etc.).\u003cbr\u003e• \u003cstrong\u003eAux In:\u003c\/strong\u003e Use this connector to provide to the Headphone output music from your laptop, cellphone, mp3 player, etc.\u003cbr\u003e• \u003cstrong\u003eCabinet Select:\u003c\/strong\u003e Switches between 3 different cabinet impulses and bypass this section for a rawer sound. Hold this button enter MIDI Learn mode to choose the MIDI channel.\u003cbr\u003e• \u003cstrong\u003eMIDI:\u003c\/strong\u003e The MIDI input allows you to change channels, toggle the mute and compressor, and select the cabinet simulation slot with any standard MIDI device. Both Program Change and Control Change commands can be used.\u003cbr\u003e• \u003cstrong\u003eFootswitch:\u003c\/strong\u003e The Intelligent Footswitch is a proprietary digitally controlled device that allows you to remotely engage and disengage the Alpha-Omega Engine. You can also hold the footswitch to Mute the amplifier. The distortion push button will remain operational with the Intelligent Footswitch plugged in.","published_at":"2019-09-02T08:35:03-04:00","created_at":"2019-09-02T08:35:03-04:00","vendor":"Darkglass","type":"Amplifiers","tags":["Brand_Darkglass","New","reverbsync-offers:off","reverbsync-shipping-profile:free","Type_Bass Heads"],"price":109999,"price_min":109999,"price_max":109999,"available":true,"price_varies":false,"compare_at_price":149999,"compare_at_price_min":149999,"compare_at_price_max":149999,"compare_at_price_varies":false,"variants":[{"id":16512243564610,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6430054580304","requires_shipping":true,"taxable":true,"featured_image":{"id":11807042142274,"product_id":2021622415426,"position":1,"created_at":"2019-09-02T08:35:03-04:00","updated_at":"2019-09-02T08:35:03-04:00","alt":"Darkglass ALPHA OMEGA 900 HEAD","width":1900,"height":1900,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphOmeg900Hed_01.jpg?v=1567427703","variant_ids":[16512243564610]},"available":true,"name":"Darkglass Alpha-Omega 900 - 900-watt Bass Head","public_title":null,"options":["Default Title"],"price":109999,"weight":0,"compare_at_price":149999,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6430054580304"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphOmeg900Hed_01.jpg?v=1567427703","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphOmeg900Hed_02.jpg?v=1567428121","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphOmeg900Hed_03.jpg?v=1567428123","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphOmeg900Hed_04.jpg?v=1567428125"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_AlphOmeg900Hed_01.jpg?v=1567427703","options":["Title"],"content":"Alpha Omega - 900 Watt Solid State Bass Guitar Amplifier Head\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBeautifully Brutal\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Alpha Omega 900 takes the best elements of ourthe Darkglass most successful distortion preamplifier ever, combined with state of the art features to make a monstrous 900-watt amplifier with earth-shattering tone. While the Darkglass signature Alpha and Omega drive engines add incredible girth and size to the overdriven signal, the studio-grade VCA compressor adds an extra layer of control, and the ultra-quiet 6-band graphic equalizer can help sculpt the tone from aggressive and overdriven to crystal clear clean, whatever your needs may be. \u003cbr\u003e\u003cbr\u003eThat's not everything though, the MIDI programmability and impulse response cabinet simulation with up to three different storable virtual cabinets make the AO900 not only one of the most complete amplifiers for the touring musician but combined with the auxiliary input and headphone output, the ideal tool for silent practicing. \u003cbr\u003e\u003cbr\u003eThe Alpha Omega 900 amplifies the best qualities of one of the most powerful and distinct Darkglass products ever made.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFront Panel Features:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eActive\/Passive:\u003c\/strong\u003e Use this push-button switch to change from passive to active mode. If your bass is active it can have a hotter signal making the amp to distort early (feel free to use if such additional distortion is desired).\u003cbr\u003e• \u003cstrong\u003eDistortion:\u003c\/strong\u003e Use this push button to turn on or off the Alpha-Omega Engine to add natural compression, organic harmonic enhancement, and saturation ranging from mild overdrive to high gain bass rage. The Alpha-Omega Engine operates before the clean section (you can therefore use the 6-Band Active EQ for additional tone shaping).\u003cbr\u003e• \u003cstrong\u003eBite:\u003c\/strong\u003e Boosts high mids (2.8kHz) for additional presence and definition.\u003cbr\u003e• \u003cstrong\u003eGrowl:\u003c\/strong\u003e Shelving Bass Boost for a fatter tone and increased low end saturation.\u003cbr\u003e• \u003cstrong\u003eCompression:\u003c\/strong\u003e This knob controls the amount of dynamic compression added to the Alpha-Omega Engine. The make-up gain is adjusted automatically. The compression can be turned off or assigned using the Darkglass Suite software.\u003cbr\u003e• \u003cstrong\u003eDrive:\u003c\/strong\u003e This knob controls the amount of distortion that the Alpha-Omega Engine will deliver. It will change from a soft, warm overdrive to a massive and modern distortion sound.\u003cbr\u003e• \u003cstrong\u003eLevel:\u003c\/strong\u003e Use this knob to control Alpha-Omega Engine’s output volume.\u003cbr\u003e• \u003cstrong\u003eBlend:\u003c\/strong\u003e Use this knob to mix between the Clean signal and the Distortion signal (Alpha-Omega Engine).\u003cbr\u003e• \u003cstrong\u003eMod:\u003c\/strong\u003e Selects or mixes between the two distinct distortion circuits: Alpha is punchy, tight with a lot of definition, whereas Omega is simply brutal and raw.\u003cbr\u003e• \u003cstrong\u003eGain:\u003c\/strong\u003e Use this knob to change the volume of the signal before the Active 6 Band EQ. You can set it low for ensuring the cleanest operation possible or set it higher for a more aggressive growl.\u003cbr\u003e• \u003cstrong\u003eBass:\u003c\/strong\u003e +-12dB at 80Hz. \u003cbr\u003e• \u003cstrong\u003eMids:\u003c\/strong\u003e +-12dB at 250, 500, 1.5K and 3Khz. \u003cbr\u003e• \u003cstrong\u003eTreble:\u003c\/strong\u003e +-12dB at 5kHz.\u003cbr\u003e• \u003cstrong\u003eMaster:\u003c\/strong\u003e Use this knob to control the overall volume of the amplifier.\u003cbr\u003e• \u003cstrong\u003eDimensions (L x H x W):\u003c\/strong\u003e 10.5” x 2.75” x 10” \u003cbr\u003e• \u003cstrong\u003eWeight:\u003c\/strong\u003e 6.39Lbs\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBack Panel Features:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eSpeaker Output:\u003c\/strong\u003e Use this connector to connect the amplifier to your cabinet. This Speakon combo jack allows for either Speakon or 1\/4” speaker cable operation. The outputs are connected in parallel. \u003cbr\u003e• \u003cstrong\u003eSend:\u003c\/strong\u003e Use this output to send the signal to effects pedals.\u003cbr\u003e• \u003cstrong\u003eReturn:\u003c\/strong\u003e Use this input to receive the signal from effects pedals. Master volume control is after this input.\u003cbr\u003e• \u003cstrong\u003ePre DI Output:\u003c\/strong\u003e Use this output to send a balanced copy of your input signal to recording equipment, mixer etc. The output is latency compensated to match with the Post DI Output\u003cbr\u003e• \u003cstrong\u003ePost DI Output:\u003c\/strong\u003e The signal for this output is taken after the distortion, EQ and effects loop, and processed through the cabinet simulation engine. The output is latency compensated with the Pre DI Output, and not affected by the master volume.\u003cbr\u003e• \u003cstrong\u003eUSB:\u003c\/strong\u003e The USB connector allows you to use the Darkglass Suite software to load different cabinet impulses or change different parameters on your amp (midi, compressor, etc.).\u003cbr\u003e• \u003cstrong\u003eAux In:\u003c\/strong\u003e Use this connector to provide to the Headphone output music from your laptop, cellphone, mp3 player, etc.\u003cbr\u003e• \u003cstrong\u003eCabinet Select:\u003c\/strong\u003e Switches between 3 different cabinet impulses and bypass this section for a rawer sound. Hold this button enter MIDI Learn mode to choose the MIDI channel.\u003cbr\u003e• \u003cstrong\u003eMIDI:\u003c\/strong\u003e The MIDI input allows you to change channels, toggle the mute and compressor, and select the cabinet simulation slot with any standard MIDI device. Both Program Change and Control Change commands can be used.\u003cbr\u003e• \u003cstrong\u003eFootswitch:\u003c\/strong\u003e The Intelligent Footswitch is a proprietary digitally controlled device that allows you to remotely engage and disengage the Alpha-Omega Engine. You can also hold the footswitch to Mute the amplifier. The distortion push button will remain operational with the Intelligent Footswitch plugged in."}
Darkglass ALPHA OMEGA 900 HEAD

Darkglass Alpha-Omega 900 - 900-watt Bass Head
New

$1,099.99

Alpha Omega - 900 Watt Solid State Bass Guitar Amplifier HeadBeautifully BrutalThe Alpha Omega 900 takes the best elements of ourthe Darkglass most successful distortion preamplifier ever, combined with state of the art features to make a monstrous 900-watt amplifier with earth-shattering tone. While the Darkglass signature Alpha and Omega drive...


More Info
{"id":4265071378498,"title":"Darkglass Hyper Luminal Bass Compressor Pedal - Limited Edition Black Finish","handle":"darkglass-hyper-luminal-bass-compressor-pedal-limited-black-finish","description":"Hyper Luminal - Hybrid Compressor - Limited Edition Black Finish\u003cbr\u003e\u003cbr\u003eThe Hyper Luminal Compressor features the first hybrid design in a compressor pedal: an analog VCA controlled by a digital side-chain allowed us to capture and include the characters of some of the most legendary compressors in history while keeping the signal path completely analog.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eBlend:\u003c\/strong\u003e Mixes the clean and effected signals. Unlike Darkglass distortions, it is placed before the Output control. So the Hyper Luminal can also be used as a transparent booster with this control at minimum.\u003cbr\u003e• \u003cstrong\u003eTime:\u003c\/strong\u003e Sets the time constants (Attack and Release). You can use the Darkglass Suite to fine tune and custom map the time constants, you can also assign different behaviours for each Mode.\u003cbr\u003e• \u003cstrong\u003eOutput:\u003c\/strong\u003e Sets the overall output volume of the unit.\u003cbr\u003e• \u003cstrong\u003eCompression:\u003c\/strong\u003e Sets the overall amount of compression. This control also affects the internal makeup gain.\u003cbr\u003e• \u003cstrong\u003eRatio:\u003c\/strong\u003e Adjusts the amount of compression.\u003cbr\u003e• \u003cstrong\u003eMode:\u003c\/strong\u003e Selects the unit's Mode (BUS, FET, or SYM)\u003cbr\u003e• \u003cstrong\u003eUSB:\u003c\/strong\u003e A Micro USB B connector allows you to connect the pedal to PC\/Mac to set Time settings, parameters, and future firmware upgrades via the Darkglass Suite.\u003cbr\u003e• \u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.95” x 4.37” x 1.77”\u003cbr\u003e• \u003cstrong\u003ePower:\u003c\/strong\u003e The Hyper Luminal Hybrid Compressor has a current draw of 250mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons, it does not accept batteries","published_at":"2019-10-16T08:37:32-04:00","created_at":"2019-10-16T08:37:32-04:00","vendor":"Darkglass","type":"Pedals and Effects","tags":["Brand_Darkglass","New","reverbsync-offers:off","reverbsync-shipping-profile:free 2 day","Type_Bass Guitar Effect Pedals","Type_Limited Edition Pedals"],"price":24999,"price_min":24999,"price_max":24999,"available":true,"price_varies":false,"compare_at_price":34999,"compare_at_price_min":34999,"compare_at_price_max":34999,"compare_at_price_varies":false,"variants":[{"id":30772257226818,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6430054580328","requires_shipping":true,"taxable":true,"featured_image":{"id":13180292923458,"product_id":4265071378498,"position":1,"created_at":"2019-10-16T08:37:32-04:00","updated_at":"2019-10-16T08:37:32-04:00","alt":"Darkglass Hyper Luminal Black","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_Hyper_Luminal_BK_01.jpg?v=1571229452","variant_ids":[30772257226818]},"available":true,"name":"Darkglass Hyper Luminal Bass Compressor Pedal - Limited Edition Black Finish","public_title":null,"options":["Default Title"],"price":24999,"weight":0,"compare_at_price":34999,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6430054580328"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_Hyper_Luminal_BK_01.jpg?v=1571229452","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_Hyper_Luminal_BK_02.jpg?v=1571231876","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_Hyper_Luminal_BK_03.jpg?v=1571231876","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_Hyper_Luminal_BK_04.jpg?v=1571231876","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_Hyper_Luminal_BK_06.jpg?v=1571231877","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_Hyper_Luminal_BK_07.jpg?v=1571231877","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_Hyper_Luminal_BK_08.jpg?v=1571231877","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_Hyper_Luminal_BK_09.jpg?v=1571231877"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_Hyper_Luminal_BK_01.jpg?v=1571229452","options":["Title"],"content":"Hyper Luminal - Hybrid Compressor - Limited Edition Black Finish\u003cbr\u003e\u003cbr\u003eThe Hyper Luminal Compressor features the first hybrid design in a compressor pedal: an analog VCA controlled by a digital side-chain allowed us to capture and include the characters of some of the most legendary compressors in history while keeping the signal path completely analog.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• \u003cstrong\u003eBlend:\u003c\/strong\u003e Mixes the clean and effected signals. Unlike Darkglass distortions, it is placed before the Output control. So the Hyper Luminal can also be used as a transparent booster with this control at minimum.\u003cbr\u003e• \u003cstrong\u003eTime:\u003c\/strong\u003e Sets the time constants (Attack and Release). You can use the Darkglass Suite to fine tune and custom map the time constants, you can also assign different behaviours for each Mode.\u003cbr\u003e• \u003cstrong\u003eOutput:\u003c\/strong\u003e Sets the overall output volume of the unit.\u003cbr\u003e• \u003cstrong\u003eCompression:\u003c\/strong\u003e Sets the overall amount of compression. This control also affects the internal makeup gain.\u003cbr\u003e• \u003cstrong\u003eRatio:\u003c\/strong\u003e Adjusts the amount of compression.\u003cbr\u003e• \u003cstrong\u003eMode:\u003c\/strong\u003e Selects the unit's Mode (BUS, FET, or SYM)\u003cbr\u003e• \u003cstrong\u003eUSB:\u003c\/strong\u003e A Micro USB B connector allows you to connect the pedal to PC\/Mac to set Time settings, parameters, and future firmware upgrades via the Darkglass Suite.\u003cbr\u003e• \u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.95” x 4.37” x 1.77”\u003cbr\u003e• \u003cstrong\u003ePower:\u003c\/strong\u003e The Hyper Luminal Hybrid Compressor has a current draw of 250mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons, it does not accept batteries"}
Darkglass Hyper Luminal Black

Darkglass Hyper Luminal Bass Compressor Pedal - Limited Edition Black Finish
New

$249.99

Hyper Luminal - Hybrid Compressor - Limited Edition Black FinishThe Hyper Luminal Compressor features the first hybrid design in a compressor pedal: an analog VCA controlled by a digital side-chain allowed us to capture and include the characters of some of the most legendary compressors in history while keeping the signal path completely analog...


More Info
{"id":4319158796354,"title":"Darkglass Microtubes X Ultra Multiband Bass Distortion Pedal","handle":"darkglass-microtubes-x-ultra-pedal","description":"Microtubes X Ultra - Multiband Distortion\u003cbr\u003e\u003cbr\u003eThe Microtubes X Ultra greatly expands on the already immense versatility of the Microtubes X7. Featuring all the great controls that its predecessor has that allows users to select exactly what frequencies they want to compress and saturate for the low and treble respectively, but with four major additions providing an additional layer of flexibility, while maintaining the same compact footprint, making it an extremely complete tool for the modern bassist.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLow Comp\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eControls compression amount for the low band. Both threshold and makeup gain are controlled to maintain a constant level. This control is also used to control the compression amount when the compressor is enabled for clean signal in Darkglass Suite.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLow Level\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSets the output volume of the low-pass signal.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLow Pass Frequency\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eControls the cut-off frequency to be mixed back to the high-pass side. Ranging from 50Hz (for only sub-bass) and 500Hz to preserve some clean mids.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHigh Level\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSets the output volume of the distorted high-pass signal.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHigh Drive\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSets the amount of distortion for the high pass side.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHigh Pass Frequency\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eControls the cutoff frequency to be distorted, ranging from 100Hz (for thicker, fuzzier saturation) or 1kHz for ultra-sharp definition.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMaster\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e+-12 dB. Sets the overall volume of the unit.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLow shelf\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e+-12 dB @ 80 Hz.; 250 Hz\/500 Hz\/1,5 kHz\/3 kHz +-12dB.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHigh shelf\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e+-12 dB @ 5 kHz.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDirect Output\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBalanced XLR output for connecting the pedal to a microphone preamp, PA system, etc.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGround lift\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eDisconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the ¼” output.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCab Sim\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eToggle the cabinet simulation on\/off on the Direct Output. This switch completely bypasses all digital circuits and allows you to get a zero latency signal when needed.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeadphones\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eMicrotubes X Ultra has a digitally controlled headphone amplifier with a 3.5mm stereo jack output. Digital volume control is available in Darkglass Suite. Headphone volume can be controlled directly on the pedal with the master volume control when the preamp is enabled. When the pedal is on bypass, the master volume does not affect the headphone volume.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSB\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eA Micro USB B connector allows you to connect the pedal to PC\/Mac to load cabinet simulation impulse responses to the pedal and control various other settings. Download the free Darkglass Suite software from www.darkglass.com\/suite to configure the pedal, load new impulses and download firmware updates.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAuxiliary Input\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003ePerfect for quiet practice, you can now connect your PC or mobile device to your pedal to play along with your favorite songs, and backing tracks while using the headphone output.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e4.92\" x 3.77\" x 2.24\"\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Microtubes X Ultra has a current draw of 200mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons, it does not accept batteries. Unregulated power supplies and\/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.","published_at":"2019-10-26T08:52:06-04:00","created_at":"2019-10-26T08:52:07-04:00","vendor":"Darkglass","type":"Pedals and Effects","tags":["Brand_Darkglass","New","reverbsync-offers:off","reverbsync-shipping-profile:free 2 day","Type_Bass Guitar Effect Pedals"],"price":42999,"price_min":42999,"price_max":42999,"available":true,"price_varies":false,"compare_at_price":55999,"compare_at_price_min":55999,"compare_at_price_max":55999,"compare_at_price_varies":false,"variants":[{"id":31013520605250,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6430054580311","requires_shipping":true,"taxable":true,"featured_image":{"id":13312516423746,"product_id":4319158796354,"position":1,"created_at":"2019-10-26T08:52:07-04:00","updated_at":"2019-10-26T08:52:07-04:00","alt":"Darkglass Microtubes X Ultra","width":2018,"height":2018,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicrotubesX-Ultra_01.jpg?v=1572094327","variant_ids":[31013520605250]},"available":true,"name":"Darkglass Microtubes X Ultra Multiband Bass Distortion Pedal","public_title":null,"options":["Default Title"],"price":42999,"weight":0,"compare_at_price":55999,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"6430054580311"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicrotubesX-Ultra_01.jpg?v=1572094327","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicrotubesX-Ultra_02.jpg?v=1572097436","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicrotubesX-Ultra_03.jpg?v=1572097436","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicrotubesX-Ultra_04.jpg?v=1572097436","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicrotubesX-Ultra_05.jpg?v=1572097436","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicrotubesX-Ultra_06.jpg?v=1572097436","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicrotubesX-Ultra_07.jpg?v=1572097436","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicrotubesX-Ultra_08.jpg?v=1572097436"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Darkglass_MicrotubesX-Ultra_01.jpg?v=1572094327","options":["Title"],"content":"Microtubes X Ultra - Multiband Distortion\u003cbr\u003e\u003cbr\u003eThe Microtubes X Ultra greatly expands on the already immense versatility of the Microtubes X7. Featuring all the great controls that its predecessor has that allows users to select exactly what frequencies they want to compress and saturate for the low and treble respectively, but with four major additions providing an additional layer of flexibility, while maintaining the same compact footprint, making it an extremely complete tool for the modern bassist.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLow Comp\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eControls compression amount for the low band. Both threshold and makeup gain are controlled to maintain a constant level. This control is also used to control the compression amount when the compressor is enabled for clean signal in Darkglass Suite.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLow Level\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSets the output volume of the low-pass signal.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLow Pass Frequency\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eControls the cut-off frequency to be mixed back to the high-pass side. Ranging from 50Hz (for only sub-bass) and 500Hz to preserve some clean mids.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHigh Level\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSets the output volume of the distorted high-pass signal.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHigh Drive\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSets the amount of distortion for the high pass side.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHigh Pass Frequency\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eControls the cutoff frequency to be distorted, ranging from 100Hz (for thicker, fuzzier saturation) or 1kHz for ultra-sharp definition.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMaster\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e+-12 dB. Sets the overall volume of the unit.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLow shelf\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e+-12 dB @ 80 Hz.; 250 Hz\/500 Hz\/1,5 kHz\/3 kHz +-12dB.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHigh shelf\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e+-12 dB @ 5 kHz.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDirect Output\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBalanced XLR output for connecting the pedal to a microphone preamp, PA system, etc.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eGround lift\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eDisconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the ¼” output.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCab Sim\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eToggle the cabinet simulation on\/off on the Direct Output. This switch completely bypasses all digital circuits and allows you to get a zero latency signal when needed.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeadphones\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eMicrotubes X Ultra has a digitally controlled headphone amplifier with a 3.5mm stereo jack output. Digital volume control is available in Darkglass Suite. Headphone volume can be controlled directly on the pedal with the master volume control when the preamp is enabled. When the pedal is on bypass, the master volume does not affect the headphone volume.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUSB\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eA Micro USB B connector allows you to connect the pedal to PC\/Mac to load cabinet simulation impulse responses to the pedal and control various other settings. Download the free Darkglass Suite software from www.darkglass.com\/suite to configure the pedal, load new impulses and download firmware updates.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAuxiliary Input\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003ePerfect for quiet practice, you can now connect your PC or mobile device to your pedal to play along with your favorite songs, and backing tracks while using the headphone output.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e4.92\" x 3.77\" x 2.24\"\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Microtubes X Ultra has a current draw of 200mA. Only use a regulated 9V DC adapter with a center-negative plug. Due to ecological reasons, it does not accept batteries. Unregulated power supplies and\/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty."}
Darkglass Microtubes X Ultra

Darkglass Microtubes X Ultra Multiband Bass Distortion Pedal
New

$429.99

Microtubes X Ultra - Multiband DistortionThe Microtubes X Ultra greatly expands on the already immense versatility of the Microtubes X7. Featuring all the great controls that its predecessor has that allows users to select exactly what frequencies they want to compress and saturate for the low and treble respectively, but with four major additio...


More Info