Catalinbread Epoch EP-3 Boost Preamp/Buffer Pedal

Catalinbread Epoch EP-3 Boost Pedal

You’ve heard the rumors: Some of rock ‘n’ roll’s greatest tones were achieved without pedals. Not so fast! While that’s technically true, some of the most venerable guitar gods relied on an old tape echo unit to help achieve their legendary tones. This unit is the Maestro Echoplex EP-3. While some guitarists made great use of its echo effect, others dragged one to every gig just for its magical preamp. This preamp circuit was wired always-on, and so even those using it as an echo effect received significant tonal enhancements from the preamp circuit as well. Everyone from Eddie Van Halen to East Bay Ray of the Dead Kennedys relied on the EP-3 preamp to take their sound to previously unreachable heights.


Now you can also, with the Epoch Boost

Around the shop, they refer to the Epoch Boost as a “mastering pedal,” because it sounds like your base tone, but sculpted to perfection by a mastering engineer. This is accomplished by employing the same internal circuitry as a real EP-3, from the NOS Orange Drop capacitors to the output mixer stage that acts as a rudimentary frequency selector---it’s all there. They’ve taken the liberty of kicking the internal voltage all the way up to 22 volts, just like the original unit, giving you unparalleled headroom and clarity.

Inside, they’ve included a switchable hi-Z input buffer if you’d like to use the Epoch Boost as your only pedal. The Boost control gives you just the EP-3 tone when rolled off, but adds up to 20dB of crystal-clear boost as you crank it.


Features:

• Pocket-sized reproduction of the “early” EP-3 preamp
• Up to 20dB sparkling, dynamic boost on tap
• 22V shunt-regulated internal power supply from your 9V supply
• NOS Sprague Orange Drop capacitors just like the original
• Closest production JFET they could find to original TIS58
• Biased a tad hotter than the stock unit for extra warmth
• Internally switchable hi-Z input buffer restores high end lost due to cable capacitance
• Super-sharp embossed enclosure
• Pedal Type: Boost
• Analog/Digital: Analog
• Inputs: 1 x 1/4"
• Outputs: 1 x 1/4"
• True Bypass: Yes
• Power Source: Accepts 9VDC center-negative power ONLY
• Power Usage: 1mA
• Batteries: 1 x 9V
• Height: 1.96"
• Width: 4.33"
• Depth: 2.36"