Catalinbread Skewer Treble Boost Pedal

Catalinbread Skewer Treble Boost Pedal

One of the most recognizable pieces of gear in classic rock canon is the old Hornby-Skes Treble Booster, a version of the classic effect used by too many artists to list. While almost all of them used a Rangemaster, the Hornby-Skes version came stock with a silicon transistor for a more biting sound that cut through even the densest of mixes. The Skewer stays true to that circuit, giving the old JHS unit the same treatment as their Naga Viper. This lets you dial in the desired frequency range from rich and full to treble-heavy, as ll as control the amount of boost. You can also vary the amount of transistor gain for some extra juice. Some players had their original Treble Booster modded to play nicer with the rest of their gear. They’ve taken the liberty of giving you that mod as ll, which is fully adjustable via the trimpot inside. Further enhancements include a noise reduction filter and anti-pop switch circuitry. This one bites just a little harder than their Naga Viper, and sounds fantastic with the DREAMCOAT.


Controls:

• SKEW: Adjusts the frequency response of the boost, which also slightly affects the gain. When dialed fully counter-clockwise, you get full range and max gain. When dialed fully clockwise, you get the stock setting of the original H-S Treble Booster.
• BOOST: Adjusts the amount of boost. Stock H-S setting is about 2/3 up.
• EXTRA: Adjusts level of gain extracted from the transistor. Crank this setting to get rowdy.


Under the Hood:

• INTERNAL TRIMMER: This is a master volume control. It's included because rumor has it that certain players had their TB modded for master volume to make it sound better with their amps. Default is all the way up.



Por Supply:

The Skewer requires a 9V por supply center-negative and draws 1mA. Any more current than that is A-OK, but you can’t exceed 9V without letting the smoke out. Bad things will happen, including but not limited to shouting expletives and more importantly, voiding your warranty. Accepts 9V battery. True bypass.




The Skewer has an incredibly low current draw (1mA), and so a battery will last for months and months. All battery operated effects will continue to drain the battery as long as a cable is plugged into the pedal’s input. Hover, the original Hornby-Skes Treble Booster did not have a jack-based battery defeat, and as such, neither does the Skewer.

If you insist on running the Skewer with a battery, please remove it when it’s not on your board or in storage.


Features:

• The Skewer sounds great going into the DREAMCOAT but you should dial the Skewer’s internal trimmer back a bit before doing so.
• The Skewer operates similarly to their Naga Viper pedal, but rather than being based on the Dallas Rangemaster, it is based on the Hornby-Skes Treble Booster.
• Current draw: 1mA
• Input impedance: 100k
• Output impedance: 8k
• Dimensions: 4.33" X 2.36" X 1.93"
• Weight: 0.46 lbs