Guitar Parts
Bare Knuckle Custom 550K CTS Standard Short Shaft Potentiometer - Fast "A" 10% Audio Taper
$11.99
Bare Knuckle Custom 550K CTS Short Shaft Potentiometers - 10% Fast Audio TaperBare Knuckle Custom Potentiometers are available in 3 Taper options. This listing is for:"A" 10% audio taper: fast roll-off from max volume, allows for quick swell techniques with a snappy response. This is the taper version that BKP has offered for several years, be...
Bare Knuckle Custom 550K CTS Standard Short Shaft Potentiometer - Slow "J" 30% Audio Taper
$11.99
Bare Knuckle Custom 550K CTS Short Shaft Potentiometers - 30% Slow Audio TaperBare Knuckle Custom Potentiometers are available in 3 Taper options. This listing is for:"J" 30% audio taper: a smoother, more linear roll-off for greater fine-tuning control, particularly in the lower half of the range of the dial.Bare Knuckle Custom 550K CTS Short S...
Bare Knuckle Custom 550K CTS Long Shaft Potentiometer - Fast 10% "A" Audio Taper
$13.99
Bare Knuckle Custom 550K CTS Long Shaft Potentiometers - 10% Audio TaperBare Knuckle Custom Potentiometers are available in 3 Taper options. This listing is for:"A" 10% audio taper: fast roll-off from max volume, allows for quick swell techniques with a snappy response. This is the taper version that BKP has offered for several years, before o...
Bare Knuckle Custom 550K CTS Standard Short Shaft Potentiometer - Medium "BD" 20% Audio Taper
Bare Knuckle Custom 550K CTS Standard Short Shaft Potentiometer - Medium "BD" 20% Audio Taper
$11.99
Bare Knuckle Custom 550K CTS Short Shaft Potentiometers - 20% Medium Audio TaperBare Knuckle Custom Potentiometers are available in 3 Taper options. This listing is for:"BD" 20% audio taper: medium roll-off for a great balance between quick response and fine-tuning control.Bare Knuckle Custom 550K CTS Short Shaft potentiometers feature a logari...
DiMarzio 500K Potentiometer
DiMarzio 500K Potentiometer
$8.10
Description:DiMarzio Custom Taper Split Shaft Pot is rated at 500K ohm. Mounting hardware included by DiMarzio to make installing this potentiometer a snap.
Bare Knuckle Custom Audio Taper 280K CTS Standard Shaft Pot
$11.99
BKP Custom Audio Taper 280K CTS standard shaft potThese feature a custom audio taper, smooth torque and +/- 10% tolerance and are specially made for Bare Knuckle by CTS.These custom CTS280K pots are best used in Strats® and Teles®.
CTS 500K Split Shaft Audio Pot
CTS 500K Split Shaft Audio Pot
$8.09
Description:500K Audio Pot, CTS, 24 spline split knurled shaft with nut, lock and dress washer. Threaded bushing is 3/8" tall.
Bare Knuckle Custom 550K CTS Long Shaft Potentiometer - Medium "BD" 20% Audio Taper
$13.99
Bare Knuckle Custom 550K CTS Long Shaft Potentiometers - 20% Audio TaperBare Knuckle Custom Potentiometers are available in 3 Taper options. This listing is for:"BD" 20% audio taper: medium roll-off for a great balance between quick response and fine-tuning control.Bare Knuckle Custom 550K CTS Long Shaft potentiometers feature a logarithmic aud...
Bare Knuckle Custom 550K CTS Long Shaft Potentiometer - Slow "J" 30% Audio Taper
$13.99
Bare Knuckle Custom 550K CTS Long Shaft Potentiometers - 30% Audio TaperBare Knuckle Custom Potentiometers are available in 3 Taper options. This listing is for:"J" 30% audio taper: a smoother, more linear roll-off for greater fine-tuning control, particularly in the lower half of the range of the dial.Bare Knuckle Custom 550K CTS Long Shaft po...
DiMarzio 500K Push/Pull Potentiometer with integral DPDT Switch, audio taper
$12.95
EP1201PP - 500k Push Pull DPDT PotentiometerDiMarzio EP1201PP Push Pull Potentiometer with integral DPDT Switch, audio taper, includes hardware.With its push/pull feature, this potentiometer from DiMarzio is great for adding coil tapping or phase wiring options to your guitar's pickup configuration.Features:• Shaft: .250" (1/4")• Length: .750" (...
EVH Low Friction 500K Solid Shaft Pot
EVH Low Friction 500K Solid Shaft Pot
$13.99
Description:The highly sought after pot previously only available on the Wolfgang USA guitar is now available to everyone.A low friction 500k potentiometer with a 1/4" solid plain shaft. For use with a set-screw style knob.
Allparts 500K Mini Pot
Allparts 500K Mini Pot
$4.49
Description:500K Mini Pot, Audio Taper, 3/8" Long Bushing, Split, Knurled Shaft with Nut and Washer.
Fender No-Load 250K Split Shaft Pot
Fender No-Load 250K Split Shaft Pot
$7.64
Description:An integral part of the Delta Tone™ system used on Fender® American Series electric guitars, the "No-Load" potentiometer functions as a normal tone control from 1 to 9. At 10, however, the tone control is taken out of the circuit for increased output and overall tonal response. The 250K is usually associated with most single-coil pic...
Emerson Custom 500K-Short-Split 500K-Ohm Emerson Pro CTS (Audio Taper – 0.375” Short Split Shaft)
Emerson Custom 500K-Short-Split 500K-Ohm Emerson Pro CTS (Audio Taper – 0.375” Short Split Shaft)
$10.00
EMERSON PRO CTS - 500K SHORT (3/8") SPLIT SHAFT POTENTIOMETEREmerson PRO CTS - 500K Short (3/8") Split Shaft Potentiometer• 1/4" split shaft for fine-knurled (24-spline) US Spec knobs. • Typically used on SG's, Flat Top Non Carved Top Les Pauls, PRS's, LP Jr's and many other models of guitars, but can be used on any guitar that requires a 500K S...
Emerson Custom 250K-Short-Solid 250K-Ohm Emerson Pro CTS (Audio Taper – 0.375” Short Solid Shaft)
Emerson Custom 250K-Short-Solid 250K-Ohm Emerson Pro CTS (Audio Taper – 0.375” Short Solid Shaft)
$10.00
EMERSON PRO CTS - 250K SHORT (3/8") SOLID SHAFT POTENTIOMETEREmerson PRO CTS - 250K Short (3/8") Solid Shaft Potentiometer• 3/8" Solid Shaft for use with (1/4”) US Spec set-screw knobs. • Typically used on Tele Style Guitars with Single Coil PickupsEmerson Pro CTS pots from Emerson Custom were designed to be the premium choice for the discerning...
Seymour Duncan YJM Yngwie Malmsteen Split Shaft 500K High-Speed Volume Pot
$24.00
Yngwie Speed Pot - 500kThe perfect volume pot for the guitarist who wants fast, dynamic phrasing control.When Yngwie Malmsteen turned to Seymour Duncan to improve and refine his pickups the YJM Fury Signature Model for Strat, it made sense to refine another important part of his playing, his volume potentiometer. With his highly refined techniqu...
Emerson Custom Pro Push Pull Pot - 500K (Short Split Shaft)
$13.99
Emerson Pro Push Pull Pot - 500K Short Split Shaft500K-Ohms Short-Split Push Pull Potentiometer.
Emerson Custom 500K Long .75" Shaft Pro CTS Push-Pull Potentiometer
$13.99
Emerson Pro Push Pull Potentiometer - 500k-Ohms (Long 0.75" Split Shaft)Emerson Pro Pots are custom made by CTS to Emerson's exacting specifications. What makes Emerson's Pro Pots different than other CTS variants on the market? ALL their pots are hand metered to ensure that they meter within Emerson's advertised +/- 8% tolerance of the 250K or ...
Allparts 500K DPDT Push Pull Audio Pot
Allparts 500K DPDT Push Pull Audio Pot
$10.79
Description:500K A push/pull audio taper potentiometer, with nut and washer.
Emerson Custom 250K Blender Potentiometer
$12.50
Emerson Pro CTS - 250K Blender Short (3/8") Split Shaft PotentiometerSimilar in function to the Fender "No Load" pot, the Emerson Pro Blender pot is an improvement to this design idea. Their Blender Pot acts as a true bypass when rotated between 9 and 10. The main difference from the "No Load" is that the Emerson Pro Blender pot does NOT have a ...
Allparts 250K Mini Pot
Allparts 250K Mini Pot
$4.49
Description:250K Mini Pot, Audio Taper, Split, Knurled Shaft, With Nut and Washer.
Fender No-Load 250k Solid Shaft Pot
Fender No-Load 250k Solid Shaft Pot
$7.64
Description:An integral part of the Delta Tone™ system used on Fender® American Series electric guitars, the "No-Load" potentiometer functions as a normal tone control from 1 to 9. At 10, however, the tone control is taken out of the circuit for increased output and overall tonal response. The 250K control is typically associated with single-coi...
EVH Low Friction 250K Solid Shaft Pot
EVH Low Friction 250K Solid Shaft Pot
$13.99
Description:The highly sought after pot previously only available on the Wolfgang USA guitar is now available to everyone.A low friction 250k potentiometer with a 1/4" solid plain shaft. For use with a set-screw style knob.
Emerson Custom 1 MEG Solid-Shaft Potentiometer
$10.00
Emerson Pro CTS - 1 MEG Short (3/8") Solid Shaft PotentiometerEmerson Pro CTS pots from Emerson Custom were designed to be the premium choice for the discerning guitarist looking for the optimum performance and tonal response from a guitar potentiometer. These specially designed Emerson Pro CTS feature a longer-life brass shaft and bushing. They...
