Bananana Matryoshka Bass Synth Pedal

Powerful and Diverse Bass Synth Pedal Equipped With 3-Channel Mixing and 8 Modes

Quickly responds to the pitch and envelope of the input sound to create a thick synth sound with no hint of latency.

Two synth sounds can be output at the same time, and these sounds can be mixed together to create a variety of tones.

The original sound can be mixed with the synth as well to create an effect that sounds as if the original sound is playing in unison with the synth.

What's more, an extremely deep sound can be produced by mixing in a pitch one octave down.


8 MODES:

Vibrato
Modulate the pitch up and down to create a growling tone. A chorus effect can also be obtained by mixing with the output from out1.

LFO
Create a growling tone by periodically shifting the filter sound. The depth of the LFO can be adjusted by the input signal to create a dynamic synth sound.

Distortion
Distort the synth output to create a tone like an acid bass. The output can be powerfully distorted while retaining low frequencies by pairing with out1.
*In this mode, the low frequencies of out1 are emphasized for easy pairing with distortion.

Bit Crush
Lower the bitrate of the synth output to create a digital-style distortion. This can be changed to a synth sound like a human voice by adjusting Sensitivity.

Pitch Shifter
Modify the pitch of out2 to -4th, detune, 5th, or one octave up. An extremely heavy bass sound can be produced by mixing out1 and out2.

Arpeggiator
Alternate between the same octave as the input and one octave down. Speed up the cycle to create a tone like that from a retro game.
*In this mode, the high frequencies of out1 are emphasized for easy pairing with out2.

Filter Sample & Hold
Periodically shift the frequency of the filter at random. Setting resonance to max will cause the filter to oscillate and make it possible to output random pitches.

Aliaser Sample & Hold
Periodically modify the sampling frequency of the synth output at random to create a glittering digital-style distortion. This can be changed to a synth sound like a human voice by adjusting Sensitivity.


Controls:

Mode
• Vibrato > ctrl:Rate
• LFO > ctrl:Rate
• Distortion > ctrl:Gain
• Bit Crush > ctrl:Bit Rate
• Pitch Shift > ctrl:-4th,Detune,5th,OctUp
• Arpeggiator > ctrl:Rate
• Filter Sample & Hold > ctrl:Rate
• Aliaser Sample & Hold > ctrl:Rate

Sens
Adjusts the input sensitivity of the envelope filter.

Oct
Octave Mix(ccw: Same octave as the input / cw: One octave lower)

Res
Filter feedback control. It will oscillate when turned fully cw.

Ctrl
Adjust the parameters of each modes (see above)

Clean
Level control for the dry signal.

Out1
Level control for the synth signal without the effects.

Out2
Level control for the synth signal with the effects selected via the mode knob.


SPECIFICATIONS
DIMENSIONS: 2 x 3.7 x 1.9 inches (WxDxH)
WEIGHT: 7.1oz
BYPASS: TRUE BYPASS
INPUT IMPEDANCE: 1Mohm
POWER SOURCE: 9V DC(Center negative)
CURRENT DRAW: 60mA