{"id":11355704782,"title":"Emerson Custom S5-B-250K Strat 5-Way Blender Pre-Wired Kit (250K Ohm Pots \u0026 0.047uf Capacitor)","handle":"emerson-custom-s5-b-250k-strat-5-way-blender-pre-wired-kit-250k-ohm-pots-0-022uf-capacitor","description":"\u003cstrong\u003eEmerson Custom S5-B-250K Strat 5-Way Blender Pre-Wired Kit (250K Ohm Pots \u0026amp; 0.047uf Capacitor)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e HANDWIRED IN BROKEN ARROW, OKLAHOMA USA •\u003cbr\u003e\u003cbr\u003eEmerson's prewired kits are very popular... and for good reason; They improve your tone! They take great pride in using premium components that work and sound better than stock electronics found in your guitar. Emerson pots are hand metered and matched for great consistency and even taper on both the volume and tone knob (better control when rolling down the volume knob... no more mud) Their Emerson Paper in Oil capacitors sound amazing! Paper in Oil capacitors were used in vintage Fender and Gibsons for good reason... They sound amazing. These kits are painstaking wired by hand one at a time in Broken Arrow Oklahoma, USA. They take great pride in their solder work and neatness when they craft their prewired kits. Emerson builds their kits to last a very long time and perform great. \u003cbr\u003e\u003cbr\u003e• ABOUT THIS PREWIRED KIT •\u003cbr\u003e\u003cbr\u003eThe Blender wiring has 1 volume, 1 master tone, and a Blender pot. In the neck position you can blend the bridge pickup in as much as you want. In the bridge position you can blend the neck pickup in as much as you want. In positions 2 and 4 you can have all three pickups on at once. The nicest part about it is the fact of it being so user friendly. Everything else seems to be hard to use on the fly.\u003cbr\u003e\u003cbr\u003eSPECS:\u003cbr\u003e\u003cbr\u003e• 1: Emerson Pro CTS Volume Pot (Master Volume) [3\/8\" Split Shaft] \u003cbr\u003e• 1: Emerson Pro CTS Tone Pot (Master Tone) [3\/8\" Split Shaft] \u003cbr\u003e• 1: Emerson Pro CTS 250K Blender Pot [3\/8\" Split Shaft] \u003cbr\u003e• 1: 0.047uf Emerson Paper in Oil Capacitor \u003cbr\u003e• 1: Volume Mod (Treble Bleed; Retains Clarity when rolling back volume knob) \u003cbr\u003e• 1: Prewired Jack \u003cbr\u003e• 1: Wiring Diagram\u003cbr\u003e\u003cbr\u003eControl Layout: \u003cbr\u003e• Master Volume \u003cbr\u003e• Master Tone \u003cbr\u003e• Blender Pot\u003cbr\u003e\u003cbr\u003eSWITCH \u0026amp; BLENDER POT FUNCTION:\u003cbr\u003e\u003cbr\u003eBlender Pot on 10: \u003cbr\u003ePosition 1: Bridge \u003cbr\u003ePosition 2: Bridge \u0026amp; Middle \u003cbr\u003ePosition 3: Middle \u003cbr\u003ePosition 4: Middle \u0026amp; Neck \u003cbr\u003ePosition 5: Neck\u003cbr\u003e\u003cbr\u003eBlender Pot on 1: \u003cbr\u003ePosition 1: Bridge w\/ Neck Pickup Faded in \u003cbr\u003ePosition 2: Bridge \u0026amp; Middle w\/ Neck Pickup Faded in \u003cbr\u003ePosition 3: Middle \u003cbr\u003ePosition 4: Middle \u0026amp; Neck w\/ Bridge pickup Faded in \u003cbr\u003ePosition 5: Neck w\/ Bridge Pickup Faded in\u003cbr\u003e\u003cbr\u003e**Installation Tips for Knobs on Split Shaft Pots: Emerson Pro split shaft pots are made to fit USA Spec 24 spline push-on knobs. Some USA \u0026amp; Import Guitars will need new USA Spec Knobs as even some US makers use import spec parts which will not work with these pots. Emerson recommends that you don't rush the knob install process. If your knob is too tight and is not going on, slightly crimp together the top of the potentiometers shaft ever so slightly so that when you go to push on the knob you don't damage the pot shaft by exerting too much downward pressure. \u003cbr\u003e","published_at":"2017-09-06T11:42:04-04:00","created_at":"2017-09-06T11:42:04-04:00","vendor":"Emerson Custom Guitars","type":"Parts","tags":["Brand_Emerson Custom Guitars","reverbsync-offers:off","reverbsync-shipping-profile:free","Type_Prewired Kits"],"price":7800,"price_min":7800,"price_max":7800,"available":false,"price_varies":false,"compare_at_price":7800,"compare_at_price_min":7800,"compare_at_price_max":7800,"compare_at_price_varies":false,"variants":[{"id":45056777870,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"090125220193","requires_shipping":true,"taxable":true,"featured_image":{"id":26899696270,"product_id":11355704782,"position":1,"created_at":"2017-09-06T11:42:04-04:00","updated_at":"2017-09-06T11:42:04-04:00","alt":"Emerson S5-B-250K Strat 5-Way","width":962,"height":962,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Emerson_S5B250K5WayStratKit.jpg?v=1504712524","variant_ids":[45056777870]},"available":false,"name":"Emerson Custom S5-B-250K Strat 5-Way Blender Pre-Wired Kit (250K Ohm Pots \u0026 0.047uf Capacitor)","public_title":null,"options":["Default Title"],"price":7800,"weight":0,"compare_at_price":7800,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"090125220193"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Emerson_S5B250K5WayStratKit.jpg?v=1504712524"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Emerson_S5B250K5WayStratKit.jpg?v=1504712524","options":["Title"],"content":"\u003cstrong\u003eEmerson Custom S5-B-250K Strat 5-Way Blender Pre-Wired Kit (250K Ohm Pots \u0026amp; 0.047uf Capacitor)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e HANDWIRED IN BROKEN ARROW, OKLAHOMA USA •\u003cbr\u003e\u003cbr\u003eEmerson's prewired kits are very popular... and for good reason; They improve your tone! They take great pride in using premium components that work and sound better than stock electronics found in your guitar. Emerson pots are hand metered and matched for great consistency and even taper on both the volume and tone knob (better control when rolling down the volume knob... no more mud) Their Emerson Paper in Oil capacitors sound amazing! Paper in Oil capacitors were used in vintage Fender and Gibsons for good reason... They sound amazing. These kits are painstaking wired by hand one at a time in Broken Arrow Oklahoma, USA. They take great pride in their solder work and neatness when they craft their prewired kits. Emerson builds their kits to last a very long time and perform great. \u003cbr\u003e\u003cbr\u003e• ABOUT THIS PREWIRED KIT •\u003cbr\u003e\u003cbr\u003eThe Blender wiring has 1 volume, 1 master tone, and a Blender pot. In the neck position you can blend the bridge pickup in as much as you want. In the bridge position you can blend the neck pickup in as much as you want. In positions 2 and 4 you can have all three pickups on at once. The nicest part about it is the fact of it being so user friendly. Everything else seems to be hard to use on the fly.\u003cbr\u003e\u003cbr\u003eSPECS:\u003cbr\u003e\u003cbr\u003e• 1: Emerson Pro CTS Volume Pot (Master Volume) [3\/8\" Split Shaft] \u003cbr\u003e• 1: Emerson Pro CTS Tone Pot (Master Tone) [3\/8\" Split Shaft] \u003cbr\u003e• 1: Emerson Pro CTS 250K Blender Pot [3\/8\" Split Shaft] \u003cbr\u003e• 1: 0.047uf Emerson Paper in Oil Capacitor \u003cbr\u003e• 1: Volume Mod (Treble Bleed; Retains Clarity when rolling back volume knob) \u003cbr\u003e• 1: Prewired Jack \u003cbr\u003e• 1: Wiring Diagram\u003cbr\u003e\u003cbr\u003eControl Layout: \u003cbr\u003e• Master Volume \u003cbr\u003e• Master Tone \u003cbr\u003e• Blender Pot\u003cbr\u003e\u003cbr\u003eSWITCH \u0026amp; BLENDER POT FUNCTION:\u003cbr\u003e\u003cbr\u003eBlender Pot on 10: \u003cbr\u003ePosition 1: Bridge \u003cbr\u003ePosition 2: Bridge \u0026amp; Middle \u003cbr\u003ePosition 3: Middle \u003cbr\u003ePosition 4: Middle \u0026amp; Neck \u003cbr\u003ePosition 5: Neck\u003cbr\u003e\u003cbr\u003eBlender Pot on 1: \u003cbr\u003ePosition 1: Bridge w\/ Neck Pickup Faded in \u003cbr\u003ePosition 2: Bridge \u0026amp; Middle w\/ Neck Pickup Faded in \u003cbr\u003ePosition 3: Middle \u003cbr\u003ePosition 4: Middle \u0026amp; Neck w\/ Bridge pickup Faded in \u003cbr\u003ePosition 5: Neck w\/ Bridge Pickup Faded in\u003cbr\u003e\u003cbr\u003e**Installation Tips for Knobs on Split Shaft Pots: Emerson Pro split shaft pots are made to fit USA Spec 24 spline push-on knobs. Some USA \u0026amp; Import Guitars will need new USA Spec Knobs as even some US makers use import spec parts which will not work with these pots. Emerson recommends that you don't rush the knob install process. If your knob is too tight and is not going on, slightly crimp together the top of the potentiometers shaft ever so slightly so that when you go to push on the knob you don't damage the pot shaft by exerting too much downward pressure. \u003cbr\u003e"}

Emerson Custom S5-B-250K Strat 5-Way Blender Pre-Wired Kit (250K Ohm Pots & 0.047uf Capacitor)

$78.00
Maximum quantity available reached.
Sku: 090125220193
Emerson Custom S5-B-250K Strat 5-Way Blender Pre-Wired Kit (250K Ohm Pots & 0.047uf Capacitor)

HANDWIRED IN BROKEN ARROW, OKLAHOMA USA •

Emerson's prewired kits are very popular... and for good reason; They improve your tone! They take great pride in using premium components that work and sound better than stock electronics found in your guitar. Emerson pots are hand metered and matched for great consistency and even taper on both the volume and tone knob (better control when rolling down the volume knob... no more mud) Their Emerson Paper in Oil capacitors sound amazing! Paper in Oil capacitors were used in vintage Fender and Gibsons for good reason... They sound amazing. These kits are painstaking wired by hand one at a time in Broken Arrow Oklahoma, USA. They take great pride in their solder work and neatness when they craft their prewired kits. Emerson builds their kits to last a very long time and perform great.

• ABOUT THIS PREWIRED KIT •

The Blender wiring has 1 volume, 1 master tone, and a Blender pot. In the neck position you can blend the bridge pickup in as much as you want. In the bridge position you can blend the neck pickup in as much as you want. In positions 2 and 4 you can have all three pickups on at once. The nicest part about it is the fact of it being so user friendly. Everything else seems to be hard to use on the fly.

SPECS:

• 1: Emerson Pro CTS Volume Pot (Master Volume) [3/8" Split Shaft]
• 1: Emerson Pro CTS Tone Pot (Master Tone) [3/8" Split Shaft]
• 1: Emerson Pro CTS 250K Blender Pot [3/8" Split Shaft]
• 1: 0.047uf Emerson Paper in Oil Capacitor
• 1: Volume Mod (Treble Bleed; Retains Clarity when rolling back volume knob)
• 1: Prewired Jack
• 1: Wiring Diagram

Control Layout:
• Master Volume
• Master Tone
• Blender Pot

SWITCH & BLENDER POT FUNCTION:

Blender Pot on 10:
Position 1: Bridge
Position 2: Bridge & Middle
Position 3: Middle
Position 4: Middle & Neck
Position 5: Neck

Blender Pot on 1:
Position 1: Bridge w/ Neck Pickup Faded in
Position 2: Bridge & Middle w/ Neck Pickup Faded in
Position 3: Middle
Position 4: Middle & Neck w/ Bridge pickup Faded in
Position 5: Neck w/ Bridge Pickup Faded in

**Installation Tips for Knobs on Split Shaft Pots: Emerson Pro split shaft pots are made to fit USA Spec 24 spline push-on knobs. Some USA & Import Guitars will need new USA Spec Knobs as even some US makers use import spec parts which will not work with these pots. Emerson recommends that you don't rush the knob install process. If your knob is too tight and is not going on, slightly crimp together the top of the potentiometers shaft ever so slightly so that when you go to push on the knob you don't damage the pot shaft by exerting too much downward pressure.