Amp Accessories

{"id":6563994107970,"title":"Legendary Tones Hot Mod V2 EVO Plug-In High Gain Tube Modification Module","handle":"legendary-tones-hot-mod-v2-evo-plug-in-high-gain-tube-modification-module","description":"\u003cstrong\u003eNEW and updated for 2021!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIntroducing the LegendaryTones HOT MOD V2 EVO, a plug-in dual 12AX7 pure tube module specifically engineered to dramatically increase gain in Marshall amps. The HOT MOD V2 EVO requires NO chassis cutting, drilled holes, or wiring modifications to your amp – it simply and easily installs in place of the middle V2 tube position. The circuit within harnesses the power of an additional gain stage now running an additional 12AX7 tube.\u003cbr\u003e\u003cbr\u003eWant your classic Marshall to sing with increased sustain and pure vacuum tube tone? Your tube high-gain solution is here. No solid state tricks or clipping diodes. 100% pure tube gain. The HOT MOD V2 EVO circuit was carefully designed to give you gradual increases of gain when using the amp’s preamp control. From adding a touch of sweet sustain, to full-on metal, your Marshall will now have greater flexibility and deliver a wider range of tones.\u003cbr\u003e\u003cbr\u003eWith the HOT MOD V2 EVO (HMV2E), because the increased gain is created inside the amp rather than through an external pedal booster running in front of the input, the noise level of the HMV2E is dramatically reduced even at higher gain settings compared to when using an overdrive or EQ pedal used as a clean boost. Additionally, because of the HMV2E design focus was articulation with sustain, your signal can still clean up well by rolling back your guitar’s volume control. And if for some reason you still wanted more gain from an external pedal to shape or increase the signal gain further, you can still do it. You likely won’t need to, but go ahead and hit the front end of your amp with a hotter signal and the HMV2E will take it just fine!\u003cbr\u003e\u003cbr\u003eThe Marshall JMP and JCM 800 series amps from the 1970s and 1980s are legendary. And back in the day, they were getting hot rodded in numerous ways and indeed were a fantastic platform to work from. The quality of the transformers and components used in those classic amps was unparalleled. Now you can get many of the same high-gain Marshall tones with the simple and easy-to-use HMV2E. With the quality build and components (transformers, capacitors) found in those original early Marshall JMP and JCM 800 series amps and pure tube signal and tone that’s straight-forward and organic, the HMV2E is a great way to modernize and get the most out of your amp.\u003cbr\u003e\u003cbr\u003eNow, there’s no need to cut up or drill into your classic amps and reduce their value. The HMV2E is a simple plug-in device that injects more gain and FUN into your Marshall! Isn’t that what it’s all about?\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNEW FOR 2021! BASS BOOST\/CUT WITH 2-STAGE GAIN SWITCH\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe original Hot Mod V2 introduced in late 2019 was a hit! But along the way, Legendary Tones refined the circuit and now, due to customer requests, they’ve refined it further and renamed it the HOT MOD V2 EVO as the evolution of the original Hot Mod V2.\u003cbr\u003e\u003cbr\u003eThe onboard Bass boost\/cut switch is a customer request for those players who wanted to have a tighter low end. In the down position, the note articulation stays tight. When in the up position, a nice range of low-end resonance.\u003cbr\u003e\u003cbr\u003eThe 2-stage Gain switch gives high-gain boosts in both positions. In the down position it has more note clarity and attack, in the up position, even more sustain and compression. The down position is based on the tuning of the original Hot Mod V2.\u003cbr\u003e\u003cbr\u003eThere are two different models currently available. This listing is for the Hot Mod V2 Evo \u003cu\u003eStandard\u003c\/u\u003e Wired:\u003cbr\u003eFor original JMP and JCM 800 series 2203\/2204\/1959\/1987. The standard wired model also works for the early reissue 1959\/1987 models without the factory-installed effects loop. Choose the standard wire option if you use the new Marshall studio series SC20H\/SV20H heads as well!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWill my Hot Mod V2 or Lynch Mod work in my amp?\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHOT MOD V2\/LYNCH MOD \u003cu\u003eSTANDARD WIRED\u003c\/u\u003e COMPATIBILITY LIST:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eMarshall (vintage, JMP):\u003cbr\u003e1986, 1987, 1987T, 1959, 1959HW (reissue), 1968, 1992, 2203, 2204, 1989, 2245 (JTM 45)\u003cbr\u003e\u003cbr\u003eMarshall JCM 800:\u003cbr\u003e2000 (V3 position), 1987, 1959, 2103, 2203, 2203KK, 2104, 2204, 2205 (pre 1984 only), 2210, 4010, 4103, 4104, 4210, 4211\u003cbr\u003e\u003cbr\u003eMarshall JCM 900:\u003cbr\u003e2500, 2501, 2502, 2100, 2101\u003cbr\u003e\u003cbr\u003eMarshall Vintage Reissue:\u003cbr\u003e1987x (pre-2003 w\/o Marshall factory effects loop), 1959 (w\/o effects loop), 2245THW (handwired JTM 45 reissue), 1959 YJM\u003cbr\u003e\u003cbr\u003eMarshall Studio:\u003cbr\u003eThis new series of mini 20 watt heads require the removal of the L bracket and thumbscrew so that the units can fit into the PCB-mounted socket in the amp which does not use a base tube shield.\u003cbr\u003e\u003cbr\u003eSC20H\/SV20H (Heads only)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFriedman Amps:\u003c\/strong\u003e\u003cbr\u003eBE-100, BE-100 DLX, BE-50 DLX\u003cbr\u003eSmall Box\u003cbr\u003e\u003cbr\u003eNOTE: While the Runt 20, JJ Jr. and Pink Taco 20 models are sonically compatible with the HMV2E, the head enclosures are too shallow and don’t have enough depth to fit the HMV2E chassis.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES ON OTHER AMPS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClones:\u003c\/strong\u003e\u003cbr\u003eThe Hot Mod V2 has been found to work well in a variety of Marshall 1959\/1987\/2203\/2204 clone and similar circuits including: Ceriatone, Germino, Mojotone, Wangs, and Bugera (Bugera needs reverse wired model and is compatible with pre-Infinium 1960 model only. Bugera Infinium 1960 does NOT work). \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOther Amps:\u003c\/strong\u003e\u003cbr\u003eThe Hot Mod V2 is designed to work with amps which use a cathode follower design into the tone stack. It adds a gain stage essentially on top of the cathode follower. As a result, the HMV2 will function in other classic amps like Fender Pro, Super, Twin, etc. as well as others like Vox AC30 or certain Traynor amps, etc. However, the circuit of the HMV2 has been tuned and optimized for Marshall circuits, so LegendaryTones generally recommend they be used for the models in the list above only. If they were to make a design for a Fender for example, it would be tuned differently just like it would also be tuned differently for a Vox.\u003cbr\u003e\u003cbr\u003ePopular amps that the HMV2\/Lynch Mod DO NOT WORK with include: Marshall Silver Jubilee series, Marshall Origin series, Marshall DSL\/TSL series, Mesa Boogie amps, and Hiwatt. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSome History\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBack in the late 1980s, Mike Soldano of Soldano Custom Amplification released his original Hot Mod, a design based around use of rare 6C10 (and then later 6K11) tubes. These tube types added more gain much the same way that the HOT MOD V2 EVO does, but they had limitations. The tubes were long out of production, getting expensive to find, and often would become microphonic and therefore limited in capability. The original Soldano Hot Mod had lots of gain and delivered on its promise, but it was ultimately taken out of production primarily due to the challenges with finding consistent and quiet tubes.\u003cbr\u003e\u003cbr\u003eStill, the original Hot Mod was the inspiration for the HOT MOD V2 EVO, which functions in much the same way as the original, but now has additional circuitry that further stabilizes the design, provides more clarity, and delivers a wider, more controllable range of gain on the preamp control of the amp rather than coming onto high-gain territory too quickly. And of course the HMV2E now also uses a pair of 12AX7(ECC83) tubes that are commonly available.\u003cbr\u003e\u003cbr\u003eWith the versatility of the new HMV2E, you’re free to experiment with different tube brands as well as try 12AT7 type tubes. The Hot Mod V2 today comes supplied with tested JJ brand tubes.","published_at":"2021-04-21T13:51:25-04:00","created_at":"2021-04-21T13:51:25-04:00","vendor":"Legendary Tones","type":"Amplifiers","tags":["Brand_Legendary Tones","New","reverbsync-offers:off","reverbsync-shipping-profile:995","Type_Amp Mod Devices"],"price":21900,"price_min":21900,"price_max":21900,"available":true,"price_varies":false,"compare_at_price":0,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39305998991426,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LEGTONEHMV2EVO","requires_shipping":true,"taxable":true,"featured_image":{"id":28034421882946,"product_id":6563994107970,"position":1,"created_at":"2021-04-21T13:51:26-04:00","updated_at":"2021-04-21T13:51:26-04:00","alt":"LegendaryTones Hot Mod V2 EVO","width":975,"height":975,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Hot_Mod_V2_Std_1.jpg?v=1619027486","variant_ids":[39305998991426]},"available":true,"name":"Legendary Tones Hot Mod V2 EVO Plug-In High Gain Tube Modification Module","public_title":null,"options":["Default Title"],"price":21900,"weight":0,"compare_at_price":0,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"LEGTONEHMV2EVO","featured_media":{"alt":null,"id":20335590899778,"position":1,"preview_image":{"aspect_ratio":1.0,"height":975,"width":975,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Hot_Mod_V2_Std_1.jpg?v=1619027486"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Hot_Mod_V2_Std_1.jpg?v=1619027486","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Hot_Mod_V2_Std_2.jpg?v=1619028049"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Hot_Mod_V2_Std_1.jpg?v=1619027486","options":["Title"],"media":[{"alt":null,"id":20335590899778,"position":1,"preview_image":{"aspect_ratio":1.0,"height":975,"width":975,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Hot_Mod_V2_Std_1.jpg?v=1619027486"},"aspect_ratio":1.0,"height":975,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Hot_Mod_V2_Std_1.jpg?v=1619027486","width":975},{"alt":null,"id":20335605743682,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Hot_Mod_V2_Std_2.jpg?v=1619028049"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Hot_Mod_V2_Std_2.jpg?v=1619028049","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eNEW and updated for 2021!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIntroducing the LegendaryTones HOT MOD V2 EVO, a plug-in dual 12AX7 pure tube module specifically engineered to dramatically increase gain in Marshall amps. The HOT MOD V2 EVO requires NO chassis cutting, drilled holes, or wiring modifications to your amp – it simply and easily installs in place of the middle V2 tube position. The circuit within harnesses the power of an additional gain stage now running an additional 12AX7 tube.\u003cbr\u003e\u003cbr\u003eWant your classic Marshall to sing with increased sustain and pure vacuum tube tone? Your tube high-gain solution is here. No solid state tricks or clipping diodes. 100% pure tube gain. The HOT MOD V2 EVO circuit was carefully designed to give you gradual increases of gain when using the amp’s preamp control. From adding a touch of sweet sustain, to full-on metal, your Marshall will now have greater flexibility and deliver a wider range of tones.\u003cbr\u003e\u003cbr\u003eWith the HOT MOD V2 EVO (HMV2E), because the increased gain is created inside the amp rather than through an external pedal booster running in front of the input, the noise level of the HMV2E is dramatically reduced even at higher gain settings compared to when using an overdrive or EQ pedal used as a clean boost. Additionally, because of the HMV2E design focus was articulation with sustain, your signal can still clean up well by rolling back your guitar’s volume control. And if for some reason you still wanted more gain from an external pedal to shape or increase the signal gain further, you can still do it. You likely won’t need to, but go ahead and hit the front end of your amp with a hotter signal and the HMV2E will take it just fine!\u003cbr\u003e\u003cbr\u003eThe Marshall JMP and JCM 800 series amps from the 1970s and 1980s are legendary. And back in the day, they were getting hot rodded in numerous ways and indeed were a fantastic platform to work from. The quality of the transformers and components used in those classic amps was unparalleled. Now you can get many of the same high-gain Marshall tones with the simple and easy-to-use HMV2E. With the quality build and components (transformers, capacitors) found in those original early Marshall JMP and JCM 800 series amps and pure tube signal and tone that’s straight-forward and organic, the HMV2E is a great way to modernize and get the most out of your amp.\u003cbr\u003e\u003cbr\u003eNow, there’s no need to cut up or drill into your classic amps and reduce their value. The HMV2E is a simple plug-in device that injects more gain and FUN into your Marshall! Isn’t that what it’s all about?\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNEW FOR 2021! BASS BOOST\/CUT WITH 2-STAGE GAIN SWITCH\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe original Hot Mod V2 introduced in late 2019 was a hit! But along the way, Legendary Tones refined the circuit and now, due to customer requests, they’ve refined it further and renamed it the HOT MOD V2 EVO as the evolution of the original Hot Mod V2.\u003cbr\u003e\u003cbr\u003eThe onboard Bass boost\/cut switch is a customer request for those players who wanted to have a tighter low end. In the down position, the note articulation stays tight. When in the up position, a nice range of low-end resonance.\u003cbr\u003e\u003cbr\u003eThe 2-stage Gain switch gives high-gain boosts in both positions. In the down position it has more note clarity and attack, in the up position, even more sustain and compression. The down position is based on the tuning of the original Hot Mod V2.\u003cbr\u003e\u003cbr\u003eThere are two different models currently available. This listing is for the Hot Mod V2 Evo \u003cu\u003eStandard\u003c\/u\u003e Wired:\u003cbr\u003eFor original JMP and JCM 800 series 2203\/2204\/1959\/1987. The standard wired model also works for the early reissue 1959\/1987 models without the factory-installed effects loop. Choose the standard wire option if you use the new Marshall studio series SC20H\/SV20H heads as well!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWill my Hot Mod V2 or Lynch Mod work in my amp?\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHOT MOD V2\/LYNCH MOD \u003cu\u003eSTANDARD WIRED\u003c\/u\u003e COMPATIBILITY LIST:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eMarshall (vintage, JMP):\u003cbr\u003e1986, 1987, 1987T, 1959, 1959HW (reissue), 1968, 1992, 2203, 2204, 1989, 2245 (JTM 45)\u003cbr\u003e\u003cbr\u003eMarshall JCM 800:\u003cbr\u003e2000 (V3 position), 1987, 1959, 2103, 2203, 2203KK, 2104, 2204, 2205 (pre 1984 only), 2210, 4010, 4103, 4104, 4210, 4211\u003cbr\u003e\u003cbr\u003eMarshall JCM 900:\u003cbr\u003e2500, 2501, 2502, 2100, 2101\u003cbr\u003e\u003cbr\u003eMarshall Vintage Reissue:\u003cbr\u003e1987x (pre-2003 w\/o Marshall factory effects loop), 1959 (w\/o effects loop), 2245THW (handwired JTM 45 reissue), 1959 YJM\u003cbr\u003e\u003cbr\u003eMarshall Studio:\u003cbr\u003eThis new series of mini 20 watt heads require the removal of the L bracket and thumbscrew so that the units can fit into the PCB-mounted socket in the amp which does not use a base tube shield.\u003cbr\u003e\u003cbr\u003eSC20H\/SV20H (Heads only)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFriedman Amps:\u003c\/strong\u003e\u003cbr\u003eBE-100, BE-100 DLX, BE-50 DLX\u003cbr\u003eSmall Box\u003cbr\u003e\u003cbr\u003eNOTE: While the Runt 20, JJ Jr. and Pink Taco 20 models are sonically compatible with the HMV2E, the head enclosures are too shallow and don’t have enough depth to fit the HMV2E chassis.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES ON OTHER AMPS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClones:\u003c\/strong\u003e\u003cbr\u003eThe Hot Mod V2 has been found to work well in a variety of Marshall 1959\/1987\/2203\/2204 clone and similar circuits including: Ceriatone, Germino, Mojotone, Wangs, and Bugera (Bugera needs reverse wired model and is compatible with pre-Infinium 1960 model only. Bugera Infinium 1960 does NOT work). \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOther Amps:\u003c\/strong\u003e\u003cbr\u003eThe Hot Mod V2 is designed to work with amps which use a cathode follower design into the tone stack. It adds a gain stage essentially on top of the cathode follower. As a result, the HMV2 will function in other classic amps like Fender Pro, Super, Twin, etc. as well as others like Vox AC30 or certain Traynor amps, etc. However, the circuit of the HMV2 has been tuned and optimized for Marshall circuits, so LegendaryTones generally recommend they be used for the models in the list above only. If they were to make a design for a Fender for example, it would be tuned differently just like it would also be tuned differently for a Vox.\u003cbr\u003e\u003cbr\u003ePopular amps that the HMV2\/Lynch Mod DO NOT WORK with include: Marshall Silver Jubilee series, Marshall Origin series, Marshall DSL\/TSL series, Mesa Boogie amps, and Hiwatt. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSome History\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBack in the late 1980s, Mike Soldano of Soldano Custom Amplification released his original Hot Mod, a design based around use of rare 6C10 (and then later 6K11) tubes. These tube types added more gain much the same way that the HOT MOD V2 EVO does, but they had limitations. The tubes were long out of production, getting expensive to find, and often would become microphonic and therefore limited in capability. The original Soldano Hot Mod had lots of gain and delivered on its promise, but it was ultimately taken out of production primarily due to the challenges with finding consistent and quiet tubes.\u003cbr\u003e\u003cbr\u003eStill, the original Hot Mod was the inspiration for the HOT MOD V2 EVO, which functions in much the same way as the original, but now has additional circuitry that further stabilizes the design, provides more clarity, and delivers a wider, more controllable range of gain on the preamp control of the amp rather than coming onto high-gain territory too quickly. And of course the HMV2E now also uses a pair of 12AX7(ECC83) tubes that are commonly available.\u003cbr\u003e\u003cbr\u003eWith the versatility of the new HMV2E, you’re free to experiment with different tube brands as well as try 12AT7 type tubes. The Hot Mod V2 today comes supplied with tested JJ brand tubes."}

{"id":6563994140738,"title":"Legendary Tones Hot Mod V2 EVO Reverse Wire Plug-In High Gain Tube Modification Module","handle":"legendary-tones-hot-mod-v2-evo-reverse-wire-plug-in-high-gain-tube-modification-module","description":"\u003cstrong\u003eNEW and updated for 2021!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIntroducing the LegendaryTones HOT MOD V2 EVO, a plug-in dual 12AX7 pure tube module specifically engineered to dramatically increase gain in Marshall amps. The HOT MOD V2 EVO requires NO chassis cutting, drilled holes, or wiring modifications to your amp – it simply and easily installs in place of the middle V2 tube position. The circuit within harnesses the power of an additional gain stage now running an additional 12AX7 tube.\u003cbr\u003e\u003cbr\u003eWant your classic Marshall to sing with increased sustain and pure vacuum tube tone? Your tube high-gain solution is here. No solid state tricks or clipping diodes. 100% pure tube gain. The HOT MOD V2 EVO circuit was carefully designed to give you gradual increases of gain when using the amp’s preamp control. From adding a touch of sweet sustain, to full-on metal, your Marshall will now have greater flexibility and deliver a wider range of tones.\u003cbr\u003e\u003cbr\u003eWith the HOT MOD V2 EVO (HMV2E), because the increased gain is created inside the amp rather than through an external pedal booster running in front of the input, the noise level of the HMV2E is dramatically reduced even at higher gain settings compared to when using an overdrive or EQ pedal used as a clean boost. Additionally, because of the HMV2E design focus was articulation with sustain, your signal can still clean up well by rolling back your guitar’s volume control. And if for some reason you still wanted more gain from an external pedal to shape or increase the signal gain further, you can still do it. You likely won’t need to, but go ahead and hit the front end of your amp with a hotter signal and the HMV2E will take it just fine!\u003cbr\u003e\u003cbr\u003eThe Marshall JMP and JCM 800 series amps from the 1970s and 1980s are legendary. And back in the day, they were getting hot rodded in numerous ways and indeed were a fantastic platform to work from. The quality of the transformers and components used in those classic amps was unparalleled. Now you can get many of the same high-gain Marshall tones with the simple and easy-to-use HMV2E. With the quality build and components (transformers, capacitors) found in those original early Marshall JMP and JCM 800 series amps and pure tube signal and tone that’s straight-forward and organic, the HMV2E is a great way to modernize and get the most out of your amp.\u003cbr\u003e\u003cbr\u003eNow, there’s no need to cut up or drill into your classic amps and reduce their value. The HMV2E is a simple plug-in device that injects more gain and FUN into your Marshall! Isn’t that what it’s all about?\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNEW FOR 2021! BASS BOOST\/CUT WITH 2-STAGE GAIN SWITCH\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe original Hot Mod V2 introduced in late 2019 was a hit! But along the way, Legendary Tones refined the circuit and now, due to customer requests, they’ve refined it further and renamed it the HOT MOD V2 EVO as the evolution of the original Hot Mod V2.\u003cbr\u003e\u003cbr\u003eThe onboard Bass boost\/cut switch is a customer request for those players who wanted to have a tighter low end. In the down position, the note articulation stays tight. When in the up position, a nice range of low-end resonance.\u003cbr\u003e\u003cbr\u003eThe 2-stage Gain switch gives high-gain boosts in both positions. In the down position it has more note clarity and attack, in the up position, even more sustain and compression. The down position is based on the tuning of the original Hot Mod V2.\u003cbr\u003e\u003cbr\u003eThere are two different models currently available. This listing is for the Hot Mod V2 Evo \u003cu\u003eReverse\u003c\/u\u003e Wired:\u003cbr\u003eFor 2203x\/2203zw, as well as 1959SLP\/1987X plexi reissue models w\/factory effects loops (2003+) that have reversed triode wiring.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWill my Hot Mod V2 or Lynch Mod work in my amp?\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHOT MOD V2\/LYNCH MOD \u003cu\u003eREVERSE WIRED\u003c\/u\u003e COMPATIBILITY LIST:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eJCM 800 800 2203X reissue (all years), 2203ZW (Zakk Wylde signature)\u003cbr\u003e\u003cbr\u003e1987X (model year 2003+ w\/Marshall added effects loop)\u003cbr\u003e\u003cbr\u003e1959SLP (w\/Marshall added effects loop),\u003cbr\u003e\u003cbr\u003eJTM 45 2245,\u003cbr\u003e\u003cbr\u003e1959RR (Randy Rhoads Signature)","published_at":"2021-04-21T13:51:29-04:00","created_at":"2021-04-21T13:51:29-04:00","vendor":"Legendary Tones","type":"Amplifiers","tags":["Brand_Legendary Tones","New","reverbsync-offers:off","reverbsync-shipping-profile:995","Type_Amp Mod Devices"],"price":21900,"price_min":21900,"price_max":21900,"available":true,"price_varies":false,"compare_at_price":0,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39305999024194,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LEGTONEHMV2EVOR","requires_shipping":true,"taxable":true,"featured_image":{"id":28034422014018,"product_id":6563994140738,"position":1,"created_at":"2021-04-21T13:51:30-04:00","updated_at":"2021-04-21T13:51:30-04:00","alt":"LegendaryTones Hot Mod V2 REV","width":975,"height":975,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Hot_Mod_V2_Rev_1.jpg?v=1619027490","variant_ids":[39305999024194]},"available":true,"name":"Legendary Tones Hot Mod V2 EVO Reverse Wire Plug-In High Gain Tube Modification Module","public_title":null,"options":["Default Title"],"price":21900,"weight":0,"compare_at_price":0,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"LEGTONEHMV2EVOR","featured_media":{"alt":null,"id":20335591096386,"position":1,"preview_image":{"aspect_ratio":1.0,"height":975,"width":975,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Hot_Mod_V2_Rev_1.jpg?v=1619027490"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Hot_Mod_V2_Rev_1.jpg?v=1619027490","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Hot_Mod_V2_Std_2_a32440b6-56d7-4e30-9c3d-91b94fe31d64.jpg?v=1619028062"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Hot_Mod_V2_Rev_1.jpg?v=1619027490","options":["Title"],"media":[{"alt":null,"id":20335591096386,"position":1,"preview_image":{"aspect_ratio":1.0,"height":975,"width":975,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Hot_Mod_V2_Rev_1.jpg?v=1619027490"},"aspect_ratio":1.0,"height":975,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Hot_Mod_V2_Rev_1.jpg?v=1619027490","width":975},{"alt":null,"id":20335606464578,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Hot_Mod_V2_Std_2_a32440b6-56d7-4e30-9c3d-91b94fe31d64.jpg?v=1619028062"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Hot_Mod_V2_Std_2_a32440b6-56d7-4e30-9c3d-91b94fe31d64.jpg?v=1619028062","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eNEW and updated for 2021!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIntroducing the LegendaryTones HOT MOD V2 EVO, a plug-in dual 12AX7 pure tube module specifically engineered to dramatically increase gain in Marshall amps. The HOT MOD V2 EVO requires NO chassis cutting, drilled holes, or wiring modifications to your amp – it simply and easily installs in place of the middle V2 tube position. The circuit within harnesses the power of an additional gain stage now running an additional 12AX7 tube.\u003cbr\u003e\u003cbr\u003eWant your classic Marshall to sing with increased sustain and pure vacuum tube tone? Your tube high-gain solution is here. No solid state tricks or clipping diodes. 100% pure tube gain. The HOT MOD V2 EVO circuit was carefully designed to give you gradual increases of gain when using the amp’s preamp control. From adding a touch of sweet sustain, to full-on metal, your Marshall will now have greater flexibility and deliver a wider range of tones.\u003cbr\u003e\u003cbr\u003eWith the HOT MOD V2 EVO (HMV2E), because the increased gain is created inside the amp rather than through an external pedal booster running in front of the input, the noise level of the HMV2E is dramatically reduced even at higher gain settings compared to when using an overdrive or EQ pedal used as a clean boost. Additionally, because of the HMV2E design focus was articulation with sustain, your signal can still clean up well by rolling back your guitar’s volume control. And if for some reason you still wanted more gain from an external pedal to shape or increase the signal gain further, you can still do it. You likely won’t need to, but go ahead and hit the front end of your amp with a hotter signal and the HMV2E will take it just fine!\u003cbr\u003e\u003cbr\u003eThe Marshall JMP and JCM 800 series amps from the 1970s and 1980s are legendary. And back in the day, they were getting hot rodded in numerous ways and indeed were a fantastic platform to work from. The quality of the transformers and components used in those classic amps was unparalleled. Now you can get many of the same high-gain Marshall tones with the simple and easy-to-use HMV2E. With the quality build and components (transformers, capacitors) found in those original early Marshall JMP and JCM 800 series amps and pure tube signal and tone that’s straight-forward and organic, the HMV2E is a great way to modernize and get the most out of your amp.\u003cbr\u003e\u003cbr\u003eNow, there’s no need to cut up or drill into your classic amps and reduce their value. The HMV2E is a simple plug-in device that injects more gain and FUN into your Marshall! Isn’t that what it’s all about?\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNEW FOR 2021! BASS BOOST\/CUT WITH 2-STAGE GAIN SWITCH\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe original Hot Mod V2 introduced in late 2019 was a hit! But along the way, Legendary Tones refined the circuit and now, due to customer requests, they’ve refined it further and renamed it the HOT MOD V2 EVO as the evolution of the original Hot Mod V2.\u003cbr\u003e\u003cbr\u003eThe onboard Bass boost\/cut switch is a customer request for those players who wanted to have a tighter low end. In the down position, the note articulation stays tight. When in the up position, a nice range of low-end resonance.\u003cbr\u003e\u003cbr\u003eThe 2-stage Gain switch gives high-gain boosts in both positions. In the down position it has more note clarity and attack, in the up position, even more sustain and compression. The down position is based on the tuning of the original Hot Mod V2.\u003cbr\u003e\u003cbr\u003eThere are two different models currently available. This listing is for the Hot Mod V2 Evo \u003cu\u003eReverse\u003c\/u\u003e Wired:\u003cbr\u003eFor 2203x\/2203zw, as well as 1959SLP\/1987X plexi reissue models w\/factory effects loops (2003+) that have reversed triode wiring.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWill my Hot Mod V2 or Lynch Mod work in my amp?\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHOT MOD V2\/LYNCH MOD \u003cu\u003eREVERSE WIRED\u003c\/u\u003e COMPATIBILITY LIST:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eJCM 800 800 2203X reissue (all years), 2203ZW (Zakk Wylde signature)\u003cbr\u003e\u003cbr\u003e1987X (model year 2003+ w\/Marshall added effects loop)\u003cbr\u003e\u003cbr\u003e1959SLP (w\/Marshall added effects loop),\u003cbr\u003e\u003cbr\u003eJTM 45 2245,\u003cbr\u003e\u003cbr\u003e1959RR (Randy Rhoads Signature)"}

{"id":4456935718978,"title":"Hiwatt FS301L Footswitch","handle":"hiwatt-fs301l-footswitch","description":"Hiwatt FS301 Footswitch - 3-Way Stereo Jack Footswitch\u003cbr\u003e\u003cbr\u003e3-Way Footswitch. 1 Stereo Jack. Channel, Gain, and Reverb Toggles. Designed for use with the Crunch 150R, Crunch 150R Combo, and Crunch 350R","published_at":"2020-02-14T16:46:04-05:00","created_at":"2020-02-14T16:46:04-05:00","vendor":"Hiwatt","type":"Amplifiers","tags":["Brand_Hiwatt","reverbsync-offers:off","reverbsync-shipping-profile:495","reverbsync-upc-does-not-apply:on","reverbsync:on","Type_Footswitch Pedals"],"price":3900,"price_min":3900,"price_max":3900,"available":true,"price_varies":false,"compare_at_price":0,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31628937166914,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HIWATTFS301L","requires_shipping":true,"taxable":true,"featured_image":{"id":13872784638018,"product_id":4456935718978,"position":1,"created_at":"2020-02-14T16:46:04-05:00","updated_at":"2020-02-14T16:46:04-05:00","alt":"Hiwatt FS301L Footswitch","width":1208,"height":1208,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS301L_footswitch_01.jpg?v=1581716764","variant_ids":[31628937166914]},"available":true,"name":"Hiwatt FS301L Footswitch","public_title":null,"options":["Default Title"],"price":3900,"weight":0,"compare_at_price":0,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"HIWATTFS301L","featured_media":{"alt":null,"id":6045701046338,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1208,"width":1208,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS301L_footswitch_01.jpg?v=1581716764"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS301L_footswitch_01.jpg?v=1581716764","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS301L_footswitch_02.jpg?v=1581724258","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS301L_footswitch_03.jpg?v=1581724258"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS301L_footswitch_01.jpg?v=1581716764","options":["Title"],"media":[{"alt":null,"id":6045701046338,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1208,"width":1208,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS301L_footswitch_01.jpg?v=1581716764"},"aspect_ratio":1.0,"height":1208,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS301L_footswitch_01.jpg?v=1581716764","width":1208},{"alt":null,"id":6045878124610,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1202,"width":1202,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS301L_footswitch_02.jpg?v=1581724258"},"aspect_ratio":1.0,"height":1202,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS301L_footswitch_02.jpg?v=1581724258","width":1202},{"alt":null,"id":6045878157378,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1150,"width":1150,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS301L_footswitch_03.jpg?v=1581724258"},"aspect_ratio":1.0,"height":1150,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS301L_footswitch_03.jpg?v=1581724258","width":1150}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Hiwatt FS301 Footswitch - 3-Way Stereo Jack Footswitch\u003cbr\u003e\u003cbr\u003e3-Way Footswitch. 1 Stereo Jack. Channel, Gain, and Reverb Toggles. Designed for use with the Crunch 150R, Crunch 150R Combo, and Crunch 350R"}

{"id":4456935686210,"title":"Hiwatt \/ Maxwatt FS201 2-Button Footswitch","handle":"hiwatt-fs201-footswitch","description":"Hiwatt \/ Maxwatt FS201 Footswitch - 2-Way Mono Jack Footswitch\u003cbr\u003e\u003cbr\u003e2-Way Footswitch. 1 Mono Jack. Channel \u0026amp; Reverb Toggles. Designed for use with the CRUNCH 25R, CRUNCH 50R, T20\/10, T20\/10C, T40\/20, and T40\/20C.","published_at":"2020-02-14T16:46:00-05:00","created_at":"2020-02-14T16:46:00-05:00","vendor":"Hiwatt","type":"Amplifiers","tags":["Brand_Hiwatt","reverbsync-offers:off","reverbsync-shipping-profile:495","reverbsync-upc-does-not-apply:on","reverbsync:on","Type_Footswitch Pedals"],"price":2900,"price_min":2900,"price_max":2900,"available":true,"price_varies":false,"compare_at_price":0,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31628937134146,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HIWATTFS201","requires_shipping":true,"taxable":true,"featured_image":{"id":14307433775170,"product_id":4456935686210,"position":3,"created_at":"2020-05-27T17:47:19-04:00","updated_at":"2020-05-27T17:47:19-04:00","alt":"Hiwatt Maxwatt FS201 FTSW","width":884,"height":884,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS201_footswitch_02_6e3c6b97-cb62-4387-8d47-dbf329296e35.jpg?v=1590616039","variant_ids":[31628937134146]},"available":true,"name":"Hiwatt \/ Maxwatt FS201 2-Button Footswitch","public_title":null,"options":["Default Title"],"price":2900,"weight":0,"compare_at_price":0,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"HIWATTFS201","featured_media":{"alt":null,"id":6480696246338,"position":3,"preview_image":{"aspect_ratio":1.0,"height":884,"width":884,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS201_footswitch_02_6e3c6b97-cb62-4387-8d47-dbf329296e35.jpg?v=1590616039"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS201_footswitch_02.jpg?v=1590498051","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS201_footswitch_03.jpg?v=1590498051","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS201_footswitch_02_6e3c6b97-cb62-4387-8d47-dbf329296e35.jpg?v=1590616039"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS201_footswitch_02.jpg?v=1590498051","options":["Title"],"media":[{"alt":null,"id":6045874749506,"position":1,"preview_image":{"aspect_ratio":1.0,"height":884,"width":884,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS201_footswitch_02.jpg?v=1581724092"},"aspect_ratio":1.0,"height":884,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS201_footswitch_02.jpg?v=1581724092","width":884},{"alt":null,"id":6045874782274,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1099,"width":1099,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS201_footswitch_03.jpg?v=1581724092"},"aspect_ratio":1.0,"height":1099,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS201_footswitch_03.jpg?v=1581724092","width":1099},{"alt":null,"id":6480696246338,"position":3,"preview_image":{"aspect_ratio":1.0,"height":884,"width":884,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS201_footswitch_02_6e3c6b97-cb62-4387-8d47-dbf329296e35.jpg?v=1590616039"},"aspect_ratio":1.0,"height":884,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Hiwatt_FS201_footswitch_02_6e3c6b97-cb62-4387-8d47-dbf329296e35.jpg?v=1590616039","width":884}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Hiwatt \/ Maxwatt FS201 Footswitch - 2-Way Mono Jack Footswitch\u003cbr\u003e\u003cbr\u003e2-Way Footswitch. 1 Mono Jack. Channel \u0026amp; Reverb Toggles. Designed for use with the CRUNCH 25R, CRUNCH 50R, T20\/10, T20\/10C, T40\/20, and T40\/20C."}

{"id":6563994042434,"title":"Legendary Tones Hot Mod V2 EVO - George Lynch Mod Plug-In High Gain Tube Modification Module","handle":"legendary-tones-hot-mod-v2-evo-george-lynch-mod-plug-in-high-gain-tube-modification-module","description":"Created in collaboration with George Lynch, the Lynch Mod is a custom modified version of the Hot Mod V2. Want to supercharge your classic Marshall amp with more gain without applying a permanent modification? Then read more below and welcome to the Lynch Mod!\u003cbr\u003e\u003cbr\u003eGeorge tried the original Hot Mod V2 (HMV2) in his Marshall and enjoyed it, so LegendaryTones decided to collaborate and do a custom-voiced version specifically for him. So instead of the HMV2’s two-position Hot Switch for two pre-set gain stages, they added a gain knob that goes from unity gain all the way to scorching hot on the Lynch Mod. And just like the original HMV2, all the clarity and low-noise characteristics have been retained. They also added a Deep switch to help provide a bass boost when desired or when using a guitar that might otherwise be a little thin. With the Deep switch off, low end is tightened and it serves as a slight bass cut for clarity.\u003cbr\u003e\u003cbr\u003eThe Lynch Mod adds an adjustable 100% pure tube gain stage on top of the cathode follower V2 position, keeping note definition and articulation while further increasing sustain. As with all previous runs of Lynch Mod units, each is meticulously built and wired by hand, point-to-point, and tuned using high-grade materials. Equipped with a pair of JJ ECC83 (12AX7) tubes, the Lynch Mod adds a gain stage to your Marshall that’s been tuned and approved by the ears of the maestro George Lynch himself.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003ci\u003e“Finding that balance between pre vs. power amp gain, sag, sustain, dynamics, and touch-sensitivity in an amp has been a perpetual challenge. To my ears, the Lynch Mod is an impressive one-stop solution that gets you there.” -George Lynch\u003c\/i\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThere are two different models currently available. This listing is for the Lynch Mod \u003cu\u003eStandard\u003c\/u\u003e Wired:\u003cbr\u003eFor original JMP and JCM 800 series 2203\/2204\/1959\/1987. The standard wired model also works for the early reissue 1959\/1987 models without the factory-installed effects loop. Choose the standard wire option if you use the new Marshall studio series SC20H\/SV20H heads as well!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWill my Hot Mod V2 or Lynch Mod work in my amp?\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHOT MOD V2\/LYNCH MOD \u003cu\u003eSTANDARD WIRED\u003c\/u\u003e COMPATIBILITY LIST:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eMarshall (vintage, JMP):\u003cbr\u003e1986, 1987, 1987T, 1959, 1959HW (reissue), 1968, 1992, 2203, 2204, 1989, 2245 (JTM 45)\u003cbr\u003e\u003cbr\u003eMarshall JCM 800:\u003cbr\u003e2000 (V3 position), 1987, 1959, 2103, 2203, 2203KK, 2104, 2204, 2205 (pre 1984 only), 2210, 4010, 4103, 4104, 4210, 4211\u003cbr\u003e\u003cbr\u003eMarshall JCM 900:\u003cbr\u003e2500, 2501, 2502, 2100, 2101\u003cbr\u003e\u003cbr\u003eMarshall Vintage Reissue:\u003cbr\u003e1987x (pre-2003 w\/o Marshall factory effects loop), 1959 (w\/o effects loop), 2245THW (handwired JTM 45 reissue), 1959 YJM\u003cbr\u003e\u003cbr\u003eMarshall Studio:\u003cbr\u003eThis new series of mini 20 watt heads require the removal of the L bracket and thumbscrew so that the units can fit into the PCB-mounted socket in the amp which does not use a base tube shield.\u003cbr\u003e\u003cbr\u003eSC20H\/SV20H (Heads only)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES ON OTHER AMPS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClones:\u003c\/strong\u003e\u003cbr\u003eThe Hot Mod V2 has been found to work well in a variety of Marshall 1959\/1987\/2203\/2204 clone and similar circuits including: Ceriatone, Germino, Mojotone, Wangs, and Bugera (Bugera needs reverse wired model and is compatible with pre-Infinium 1960 model only. Bugera Infinium 1960 does NOT work). \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOther Amps:\u003c\/strong\u003e\u003cbr\u003eThe Hot Mod V2 is designed to work with amps which use a cathode follower design into the tone stack. It adds a gain stage essentially on top of the cathode follower. As a result, the HMV2 will function in other classic amps like Fender Pro, Super, Twin, etc. as well as others like Vox AC30 or certain Traynor amps, etc. However, the circuit of the HMV2 has been tuned and optimized for Marshall circuits, so LegendaryTones generally recommend they be used for the models in the list above only. If they were to make a design for a Fender for example, it would be tuned differently just like it would also be tuned differently for a Vox.\u003cbr\u003e\u003cbr\u003ePopular amps that the HMV2\/Lynch Mod DO NOT WORK with include: Marshall Silver Jubilee series, Marshall Origin series, Marshall DSL\/TSL series, Mesa Boogie amps, and Hiwatt. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSome History\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBack in the late 1980s, Mike Soldano of Soldano Custom Amplification released his original Hot Mod, a design based around use of rare 6C10 (and then later 6K11) tubes. These tube types added more gain much the same way that the HOT MOD V2 EVO does, but they had limitations. The tubes were long out of production, getting expensive to find, and often would become microphonic and therefore limited in capability. The original Soldano Hot Mod had lots of gain and delivered on its promise, but it was ultimately taken out of production primarily due to the challenges with finding consistent and quiet tubes.\u003cbr\u003e\u003cbr\u003eStill, the original Hot Mod was the inspiration for the HOT MOD V2 EVO, which functions in much the same way as the original, but now has additional circuitry that further stabilizes the design, provides more clarity, and delivers a wider, more controllable range of gain on the preamp control of the amp rather than coming onto high-gain territory too quickly. And of course the HMV2E now also uses a pair of 12AX7(ECC83) tubes that are commonly available.\u003cbr\u003e\u003cbr\u003eWith the versatility of the new HMV2E, you’re free to experiment with different tube brands as well as try 12AT7 type tubes. The Hot Mod V2 today comes supplied with tested JJ brand tubes.","published_at":"2021-04-21T13:51:19-04:00","created_at":"2021-04-21T13:51:19-04:00","vendor":"Legendary Tones","type":"Amplifiers","tags":["Brand_Legendary Tones","New","reverbsync-offers:off","reverbsync-shipping-profile:995","Type_Amp Mod Devices"],"price":29900,"price_min":29900,"price_max":29900,"available":false,"price_varies":false,"compare_at_price":0,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39305998925890,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LEGTONEHMLYNCH","requires_shipping":true,"taxable":true,"featured_image":{"id":28034421751874,"product_id":6563994042434,"position":1,"created_at":"2021-04-21T13:51:19-04:00","updated_at":"2021-04-21T13:51:19-04:00","alt":"LegendaryTones Hot Mod Lynch","width":959,"height":959,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Lynch_Mod_Std_1.jpg?v=1619027479","variant_ids":[39305998925890]},"available":false,"name":"Legendary Tones Hot Mod V2 EVO - George Lynch Mod Plug-In High Gain Tube Modification Module","public_title":null,"options":["Default Title"],"price":29900,"weight":0,"compare_at_price":0,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"LEGTONEHMLYNCH","featured_media":{"alt":null,"id":20335590768706,"position":1,"preview_image":{"aspect_ratio":1.0,"height":959,"width":959,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Lynch_Mod_Std_1.jpg?v=1619027479"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Lynch_Mod_Std_1.jpg?v=1619027479","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Lynch_Mod_Std_2.jpg?v=1619028022"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Lynch_Mod_Std_1.jpg?v=1619027479","options":["Title"],"media":[{"alt":null,"id":20335590768706,"position":1,"preview_image":{"aspect_ratio":1.0,"height":959,"width":959,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Lynch_Mod_Std_1.jpg?v=1619027479"},"aspect_ratio":1.0,"height":959,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Lynch_Mod_Std_1.jpg?v=1619027479","width":959},{"alt":null,"id":20335604564034,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Lynch_Mod_Std_2.jpg?v=1619028022"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Lynch_Mod_Std_2.jpg?v=1619028022","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Created in collaboration with George Lynch, the Lynch Mod is a custom modified version of the Hot Mod V2. Want to supercharge your classic Marshall amp with more gain without applying a permanent modification? Then read more below and welcome to the Lynch Mod!\u003cbr\u003e\u003cbr\u003eGeorge tried the original Hot Mod V2 (HMV2) in his Marshall and enjoyed it, so LegendaryTones decided to collaborate and do a custom-voiced version specifically for him. So instead of the HMV2’s two-position Hot Switch for two pre-set gain stages, they added a gain knob that goes from unity gain all the way to scorching hot on the Lynch Mod. And just like the original HMV2, all the clarity and low-noise characteristics have been retained. They also added a Deep switch to help provide a bass boost when desired or when using a guitar that might otherwise be a little thin. With the Deep switch off, low end is tightened and it serves as a slight bass cut for clarity.\u003cbr\u003e\u003cbr\u003eThe Lynch Mod adds an adjustable 100% pure tube gain stage on top of the cathode follower V2 position, keeping note definition and articulation while further increasing sustain. As with all previous runs of Lynch Mod units, each is meticulously built and wired by hand, point-to-point, and tuned using high-grade materials. Equipped with a pair of JJ ECC83 (12AX7) tubes, the Lynch Mod adds a gain stage to your Marshall that’s been tuned and approved by the ears of the maestro George Lynch himself.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003ci\u003e“Finding that balance between pre vs. power amp gain, sag, sustain, dynamics, and touch-sensitivity in an amp has been a perpetual challenge. To my ears, the Lynch Mod is an impressive one-stop solution that gets you there.” -George Lynch\u003c\/i\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThere are two different models currently available. This listing is for the Lynch Mod \u003cu\u003eStandard\u003c\/u\u003e Wired:\u003cbr\u003eFor original JMP and JCM 800 series 2203\/2204\/1959\/1987. The standard wired model also works for the early reissue 1959\/1987 models without the factory-installed effects loop. Choose the standard wire option if you use the new Marshall studio series SC20H\/SV20H heads as well!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWill my Hot Mod V2 or Lynch Mod work in my amp?\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHOT MOD V2\/LYNCH MOD \u003cu\u003eSTANDARD WIRED\u003c\/u\u003e COMPATIBILITY LIST:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eMarshall (vintage, JMP):\u003cbr\u003e1986, 1987, 1987T, 1959, 1959HW (reissue), 1968, 1992, 2203, 2204, 1989, 2245 (JTM 45)\u003cbr\u003e\u003cbr\u003eMarshall JCM 800:\u003cbr\u003e2000 (V3 position), 1987, 1959, 2103, 2203, 2203KK, 2104, 2204, 2205 (pre 1984 only), 2210, 4010, 4103, 4104, 4210, 4211\u003cbr\u003e\u003cbr\u003eMarshall JCM 900:\u003cbr\u003e2500, 2501, 2502, 2100, 2101\u003cbr\u003e\u003cbr\u003eMarshall Vintage Reissue:\u003cbr\u003e1987x (pre-2003 w\/o Marshall factory effects loop), 1959 (w\/o effects loop), 2245THW (handwired JTM 45 reissue), 1959 YJM\u003cbr\u003e\u003cbr\u003eMarshall Studio:\u003cbr\u003eThis new series of mini 20 watt heads require the removal of the L bracket and thumbscrew so that the units can fit into the PCB-mounted socket in the amp which does not use a base tube shield.\u003cbr\u003e\u003cbr\u003eSC20H\/SV20H (Heads only)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES ON OTHER AMPS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClones:\u003c\/strong\u003e\u003cbr\u003eThe Hot Mod V2 has been found to work well in a variety of Marshall 1959\/1987\/2203\/2204 clone and similar circuits including: Ceriatone, Germino, Mojotone, Wangs, and Bugera (Bugera needs reverse wired model and is compatible with pre-Infinium 1960 model only. Bugera Infinium 1960 does NOT work). \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOther Amps:\u003c\/strong\u003e\u003cbr\u003eThe Hot Mod V2 is designed to work with amps which use a cathode follower design into the tone stack. It adds a gain stage essentially on top of the cathode follower. As a result, the HMV2 will function in other classic amps like Fender Pro, Super, Twin, etc. as well as others like Vox AC30 or certain Traynor amps, etc. However, the circuit of the HMV2 has been tuned and optimized for Marshall circuits, so LegendaryTones generally recommend they be used for the models in the list above only. If they were to make a design for a Fender for example, it would be tuned differently just like it would also be tuned differently for a Vox.\u003cbr\u003e\u003cbr\u003ePopular amps that the HMV2\/Lynch Mod DO NOT WORK with include: Marshall Silver Jubilee series, Marshall Origin series, Marshall DSL\/TSL series, Mesa Boogie amps, and Hiwatt. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSome History\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBack in the late 1980s, Mike Soldano of Soldano Custom Amplification released his original Hot Mod, a design based around use of rare 6C10 (and then later 6K11) tubes. These tube types added more gain much the same way that the HOT MOD V2 EVO does, but they had limitations. The tubes were long out of production, getting expensive to find, and often would become microphonic and therefore limited in capability. The original Soldano Hot Mod had lots of gain and delivered on its promise, but it was ultimately taken out of production primarily due to the challenges with finding consistent and quiet tubes.\u003cbr\u003e\u003cbr\u003eStill, the original Hot Mod was the inspiration for the HOT MOD V2 EVO, which functions in much the same way as the original, but now has additional circuitry that further stabilizes the design, provides more clarity, and delivers a wider, more controllable range of gain on the preamp control of the amp rather than coming onto high-gain territory too quickly. And of course the HMV2E now also uses a pair of 12AX7(ECC83) tubes that are commonly available.\u003cbr\u003e\u003cbr\u003eWith the versatility of the new HMV2E, you’re free to experiment with different tube brands as well as try 12AT7 type tubes. The Hot Mod V2 today comes supplied with tested JJ brand tubes."}

{"id":6563994075202,"title":"Legendary Tones Hot Mod V2 EVO - George Lynch Mod Reverse Wire Plug-In High Gain Tube Modification Module","handle":"legendary-tones-hot-mod-v2-evo-george-lynch-mod-reverse-wire-plug-in-high-gain-tube-modification-module","description":"Created in collaboration with George Lynch, the Lynch Mod is a custom modified version of the Hot Mod V2. Want to supercharge your classic Marshall amp with more gain without applying a permanent modification? Then read more below and welcome to the Lynch Mod!\u003cbr\u003e\u003cbr\u003eGeorge tried the original Hot Mod V2 (HMV2) in his Marshall and enjoyed it, so LegendaryTones decided to collaborate and do a custom-voiced version specifically for him. So instead of the HMV2’s two-position Hot Switch for two pre-set gain stages, they added a gain knob that goes from unity gain all the way to scorching hot on the Lynch Mod. And just like the original HMV2, all the clarity and low-noise characteristics have been retained. They also added a Deep switch to help provide a bass boost when desired or when using a guitar that might otherwise be a little thin. With the Deep switch off, low end is tightened and it serves as a slight bass cut for clarity.\u003cbr\u003e\u003cbr\u003eThe Lynch Mod adds an adjustable 100% pure tube gain stage on top of the cathode follower V2 position, keeping note definition and articulation while further increasing sustain. As with all previous runs of Lynch Mod units, each is meticulously built and wired by hand, point-to-point, and tuned using high-grade materials. Equipped with a pair of JJ ECC83 (12AX7) tubes, the Lynch Mod adds a gain stage to your Marshall that’s been tuned and approved by the ears of the maestro George Lynch himself.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003ci\u003e“Finding that balance between pre vs. power amp gain, sag, sustain, dynamics, and touch-sensitivity in an amp has been a perpetual challenge. To my ears, the Lynch Mod is an impressive one-stop solution that gets you there.” -George Lynch\u003c\/i\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThere are two different models currently available. This listing is for the Lynch Mod \u003cu\u003eReverse\u003c\/u\u003e Wired:\u003cbr\u003eFor 2203x\/2203zw, as well as 1959SLP\/1987X plexi reissue models w\/factory effects loops (2003+) that have reversed triode wiring.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWill my Hot Mod V2 or Lynch Mod work in my amp?\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHOT MOD V2\/LYNCH MOD \u003cu\u003eREVERSE WIRED\u003c\/u\u003e COMPATIBILITY LIST:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eJCM 800 800 2203X reissue (all years), 2203ZW (Zakk Wylde signature)\u003cbr\u003e\u003cbr\u003e1987X (model year 2003+ w\/Marshall added effects loop)\u003cbr\u003e\u003cbr\u003e1959SLP (w\/Marshall added effects loop),\u003cbr\u003e\u003cbr\u003eJTM 45 2245,\u003cbr\u003e\u003cbr\u003e1959RR (Randy Rhoads Signature)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES ON OTHER AMPS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClones:\u003c\/strong\u003e\u003cbr\u003eThe Hot Mod V2 has been found to work well in a variety of Marshall 1959\/1987\/2203\/2204 clone and similar circuits including: Ceriatone, Germino, Mojotone, Wangs, and Bugera (Bugera needs reverse wired model and is compatible with pre-Infinium 1960 model only. Bugera Infinium 1960 does NOT work). \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOther Amps:\u003c\/strong\u003e\u003cbr\u003eThe Hot Mod V2 is designed to work with amps which use a cathode follower design into the tone stack. It adds a gain stage essentially on top of the cathode follower. As a result, the HMV2 will function in other classic amps like Fender Pro, Super, Twin, etc. as well as others like Vox AC30 or certain Traynor amps, etc. However, the circuit of the HMV2 has been tuned and optimized for Marshall circuits, so LegendaryTones generally recommend they be used for the models in the list above only. If they were to make a design for a Fender for example, it would be tuned differently just like it would also be tuned differently for a Vox.\u003cbr\u003e\u003cbr\u003ePopular amps that the HMV2\/Lynch Mod DO NOT WORK with include: Marshall Silver Jubilee series, Marshall Origin series, Marshall DSL\/TSL series, Mesa Boogie amps, and Hiwatt. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSome History\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBack in the late 1980s, Mike Soldano of Soldano Custom Amplification released his original Hot Mod, a design based around use of rare 6C10 (and then later 6K11) tubes. These tube types added more gain much the same way that the HOT MOD V2 EVO does, but they had limitations. The tubes were long out of production, getting expensive to find, and often would become microphonic and therefore limited in capability. The original Soldano Hot Mod had lots of gain and delivered on its promise, but it was ultimately taken out of production primarily due to the challenges with finding consistent and quiet tubes.\u003cbr\u003e\u003cbr\u003eStill, the original Hot Mod was the inspiration for the HOT MOD V2 EVO, which functions in much the same way as the original, but now has additional circuitry that further stabilizes the design, provides more clarity, and delivers a wider, more controllable range of gain on the preamp control of the amp rather than coming onto high-gain territory too quickly. And of course the HMV2E now also uses a pair of 12AX7(ECC83) tubes that are commonly available.\u003cbr\u003e\u003cbr\u003eWith the versatility of the new HMV2E, you’re free to experiment with different tube brands as well as try 12AT7 type tubes. The Hot Mod V2 today comes supplied with tested JJ brand tubes.","published_at":"2021-04-21T13:51:22-04:00","created_at":"2021-04-21T13:51:22-04:00","vendor":"Legendary Tones","type":"Amplifiers","tags":["Brand_Legendary Tones","New","reverbsync-offers:off","reverbsync-shipping-profile:995","Type_Amp Mod Devices"],"price":29900,"price_min":29900,"price_max":29900,"available":false,"price_varies":false,"compare_at_price":0,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39305998958658,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LEGTONEHMLYNCHR","requires_shipping":true,"taxable":true,"featured_image":{"id":28034421817410,"product_id":6563994075202,"position":1,"created_at":"2021-04-21T13:51:22-04:00","updated_at":"2021-04-21T13:51:22-04:00","alt":"LegendaryTones Hot Mod Lynch R","width":959,"height":959,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Lynch_Mod_Rev_1.jpg?v=1619027482","variant_ids":[39305998958658]},"available":false,"name":"Legendary Tones Hot Mod V2 EVO - George Lynch Mod Reverse Wire Plug-In High Gain Tube Modification Module","public_title":null,"options":["Default Title"],"price":29900,"weight":0,"compare_at_price":0,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"LEGTONEHMLYNCHR","featured_media":{"alt":null,"id":20335590834242,"position":1,"preview_image":{"aspect_ratio":1.0,"height":959,"width":959,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Lynch_Mod_Rev_1.jpg?v=1619027482"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Lynch_Mod_Rev_1.jpg?v=1619027482","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Lynch_Mod_Std_2_eb20db58-6a11-40ac-86c6-649672466b2e.jpg?v=1619028035"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Lynch_Mod_Rev_1.jpg?v=1619027482","options":["Title"],"media":[{"alt":null,"id":20335590834242,"position":1,"preview_image":{"aspect_ratio":1.0,"height":959,"width":959,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Lynch_Mod_Rev_1.jpg?v=1619027482"},"aspect_ratio":1.0,"height":959,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Lynch_Mod_Rev_1.jpg?v=1619027482","width":959},{"alt":null,"id":20335605121090,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Lynch_Mod_Std_2_eb20db58-6a11-40ac-86c6-649672466b2e.jpg?v=1619028035"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/LegendaryTones_Lynch_Mod_Std_2_eb20db58-6a11-40ac-86c6-649672466b2e.jpg?v=1619028035","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Created in collaboration with George Lynch, the Lynch Mod is a custom modified version of the Hot Mod V2. Want to supercharge your classic Marshall amp with more gain without applying a permanent modification? Then read more below and welcome to the Lynch Mod!\u003cbr\u003e\u003cbr\u003eGeorge tried the original Hot Mod V2 (HMV2) in his Marshall and enjoyed it, so LegendaryTones decided to collaborate and do a custom-voiced version specifically for him. So instead of the HMV2’s two-position Hot Switch for two pre-set gain stages, they added a gain knob that goes from unity gain all the way to scorching hot on the Lynch Mod. And just like the original HMV2, all the clarity and low-noise characteristics have been retained. They also added a Deep switch to help provide a bass boost when desired or when using a guitar that might otherwise be a little thin. With the Deep switch off, low end is tightened and it serves as a slight bass cut for clarity.\u003cbr\u003e\u003cbr\u003eThe Lynch Mod adds an adjustable 100% pure tube gain stage on top of the cathode follower V2 position, keeping note definition and articulation while further increasing sustain. As with all previous runs of Lynch Mod units, each is meticulously built and wired by hand, point-to-point, and tuned using high-grade materials. Equipped with a pair of JJ ECC83 (12AX7) tubes, the Lynch Mod adds a gain stage to your Marshall that’s been tuned and approved by the ears of the maestro George Lynch himself.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003ci\u003e“Finding that balance between pre vs. power amp gain, sag, sustain, dynamics, and touch-sensitivity in an amp has been a perpetual challenge. To my ears, the Lynch Mod is an impressive one-stop solution that gets you there.” -George Lynch\u003c\/i\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThere are two different models currently available. This listing is for the Lynch Mod \u003cu\u003eReverse\u003c\/u\u003e Wired:\u003cbr\u003eFor 2203x\/2203zw, as well as 1959SLP\/1987X plexi reissue models w\/factory effects loops (2003+) that have reversed triode wiring.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWill my Hot Mod V2 or Lynch Mod work in my amp?\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHOT MOD V2\/LYNCH MOD \u003cu\u003eREVERSE WIRED\u003c\/u\u003e COMPATIBILITY LIST:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eJCM 800 800 2203X reissue (all years), 2203ZW (Zakk Wylde signature)\u003cbr\u003e\u003cbr\u003e1987X (model year 2003+ w\/Marshall added effects loop)\u003cbr\u003e\u003cbr\u003e1959SLP (w\/Marshall added effects loop),\u003cbr\u003e\u003cbr\u003eJTM 45 2245,\u003cbr\u003e\u003cbr\u003e1959RR (Randy Rhoads Signature)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES ON OTHER AMPS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eClones:\u003c\/strong\u003e\u003cbr\u003eThe Hot Mod V2 has been found to work well in a variety of Marshall 1959\/1987\/2203\/2204 clone and similar circuits including: Ceriatone, Germino, Mojotone, Wangs, and Bugera (Bugera needs reverse wired model and is compatible with pre-Infinium 1960 model only. Bugera Infinium 1960 does NOT work). \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOther Amps:\u003c\/strong\u003e\u003cbr\u003eThe Hot Mod V2 is designed to work with amps which use a cathode follower design into the tone stack. It adds a gain stage essentially on top of the cathode follower. As a result, the HMV2 will function in other classic amps like Fender Pro, Super, Twin, etc. as well as others like Vox AC30 or certain Traynor amps, etc. However, the circuit of the HMV2 has been tuned and optimized for Marshall circuits, so LegendaryTones generally recommend they be used for the models in the list above only. If they were to make a design for a Fender for example, it would be tuned differently just like it would also be tuned differently for a Vox.\u003cbr\u003e\u003cbr\u003ePopular amps that the HMV2\/Lynch Mod DO NOT WORK with include: Marshall Silver Jubilee series, Marshall Origin series, Marshall DSL\/TSL series, Mesa Boogie amps, and Hiwatt. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSome History\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBack in the late 1980s, Mike Soldano of Soldano Custom Amplification released his original Hot Mod, a design based around use of rare 6C10 (and then later 6K11) tubes. These tube types added more gain much the same way that the HOT MOD V2 EVO does, but they had limitations. The tubes were long out of production, getting expensive to find, and often would become microphonic and therefore limited in capability. The original Soldano Hot Mod had lots of gain and delivered on its promise, but it was ultimately taken out of production primarily due to the challenges with finding consistent and quiet tubes.\u003cbr\u003e\u003cbr\u003eStill, the original Hot Mod was the inspiration for the HOT MOD V2 EVO, which functions in much the same way as the original, but now has additional circuitry that further stabilizes the design, provides more clarity, and delivers a wider, more controllable range of gain on the preamp control of the amp rather than coming onto high-gain territory too quickly. And of course the HMV2E now also uses a pair of 12AX7(ECC83) tubes that are commonly available.\u003cbr\u003e\u003cbr\u003eWith the versatility of the new HMV2E, you’re free to experiment with different tube brands as well as try 12AT7 type tubes. The Hot Mod V2 today comes supplied with tested JJ brand tubes."}

{"id":4626926665794,"title":"Synergy R5 5 Button MIDI Foot Controller - Includes 12v Power Supply \u0026 15' MIDI Cable","handle":"synergy-r5-5-button-midi-foot-controller-includes-12v-power-supply-15-midi-cable","description":"Synergy R5 MIDI Pedal\u003cbr\u003e\u003cbr\u003eThe R5 pedal is essentially a 5 button MIDI pedal that is preset to send program change commands 1 through 5 on MIDI channel 1 - specifically designed to control your SYN-2 (rack mount hardware unit)\u003cbr\u003e\u003cbr\u003eYour SYN-2 will come preprogrammed to respond to modules channels 1 through 4 on buttons 1 through 4 of the footswitch. Button 5 will be assigned to BYPASS. You can change\/assign any module channel or bypass to be on any buttons you wish by following the programming instructions of the SYN-2. The R5 pedal can operate from any power supply that puts out 9 to 12 volts AC or DC and has a current rating of at least 50 milliamps.","published_at":"2020-07-06T20:39:43-04:00","created_at":"2020-07-06T20:39:43-04:00","vendor":"Synergy","type":"Amplifiers","tags":["Brand_Synergy","New","reverbsync-offers:off","reverbsync-shipping-profile:free 2 day","reverbsync:on","Type_Footswitch Pedals"],"price":12999,"price_min":12999,"price_max":12999,"available":false,"price_varies":false,"compare_at_price":12999,"compare_at_price_min":12999,"compare_at_price_max":12999,"compare_at_price_varies":false,"variants":[{"id":32273926029378,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"763815130323","requires_shipping":true,"taxable":true,"featured_image":{"id":14503031799874,"product_id":4626926665794,"position":1,"created_at":"2020-07-06T20:39:43-04:00","updated_at":"2020-07-06T20:39:43-04:00","alt":"Synergy R5 Midi Pedal","width":2000,"height":2000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Synergy_R5-MIDI-Pedal_01.jpg?v=1594082383","variant_ids":[32273926029378]},"available":false,"name":"Synergy R5 5 Button MIDI Foot Controller - Includes 12v Power Supply \u0026 15' MIDI Cable","public_title":null,"options":["Default Title"],"price":12999,"weight":0,"compare_at_price":12999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"763815130323","featured_media":{"alt":null,"id":6676422262850,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Synergy_R5-MIDI-Pedal_01.jpg?v=1594082383"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Synergy_R5-MIDI-Pedal_01.jpg?v=1594082383","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Synergy_R5-MIDI-Pedal_02.jpg?v=1627735443","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Synergy_R5-MIDI-Pedal_03.jpg?v=1627735443","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Synergy_R5-MIDI-Pedal_04.jpg?v=1627735443","\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Synergy_R5-MIDI-Pedal_05.jpg?v=1627735443"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Synergy_R5-MIDI-Pedal_01.jpg?v=1594082383","options":["Title"],"media":[{"alt":null,"id":6676422262850,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Synergy_R5-MIDI-Pedal_01.jpg?v=1594082383"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Synergy_R5-MIDI-Pedal_01.jpg?v=1594082383","width":2000},{"alt":null,"id":6676610351170,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Synergy_R5-MIDI-Pedal_02.jpg?v=1594085241"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Synergy_R5-MIDI-Pedal_02.jpg?v=1594085241","width":2000},{"alt":null,"id":6676610383938,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Synergy_R5-MIDI-Pedal_03.jpg?v=1594085241"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Synergy_R5-MIDI-Pedal_03.jpg?v=1594085241","width":2000},{"alt":null,"id":6676610416706,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Synergy_R5-MIDI-Pedal_04.jpg?v=1594085241"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Synergy_R5-MIDI-Pedal_04.jpg?v=1594085241","width":2000},{"alt":null,"id":6676610449474,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1366,"width":1366,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Synergy_R5-MIDI-Pedal_05.jpg?v=1594085240"},"aspect_ratio":1.0,"height":1366,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2015\/7205\/products\/Synergy_R5-MIDI-Pedal_05.jpg?v=1594085240","width":1366}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Synergy R5 MIDI Pedal\u003cbr\u003e\u003cbr\u003eThe R5 pedal is essentially a 5 button MIDI pedal that is preset to send program change commands 1 through 5 on MIDI channel 1 - specifically designed to control your SYN-2 (rack mount hardware unit)\u003cbr\u003e\u003cbr\u003eYour SYN-2 will come preprogrammed to respond to modules channels 1 through 4 on buttons 1 through 4 of the footswitch. Button 5 will be assigned to BYPASS. You can change\/assign any module channel or bypass to be on any buttons you wish by following the programming instructions of the SYN-2. The R5 pedal can operate from any power supply that puts out 9 to 12 volts AC or DC and has a current rating of at least 50 milliamps."}